








	*SMF Tools*

SMF Type 32 Record

This table shows the record layout for type 32 SMF records
(TSO/E User Work Accounting).

List of other SMF record layouts available.
List of sample SMF reports.

Purpose: Record type 32 is written at normal or abnormal termination of a TSO/E session. It is written at the expiration of a TSO/E accounting interval. For more information on using this information see “Transaction Billing” on page 1-6 and “Performing TSO/E command accounting” on page 4-7.

To use the type 32 record, you must have installed MVS TSO/E. Type 32 records are produced for TSO/E sessions only, TSO/E commands entered from batch jobs are not counted. You can monitor the TSO/E commands users issue and record the number of times a user issues a specific command or subcommand. For example, you can:

Keep track of and compare how frequently certain commands at your installation are used. You may want to pro`ide better performance for the more commonly used commands by placing them in LPALIB.
Keep track of the number of times users issue TSO/E commands so you can bill users for their computer use.
Audit the commands users issue to ensure they do not violate security practices at your installation.
The record contains the names of the commands and the number of times each command was used during the session and the device connect times for each command. Only those commands included in CSECT IEEMB846 (and entered at least once) are used. Aliases of commands are counted in separate entries in the record. For instance SEND and SE are counted as separate commands. Statistics for all other commands is included in ‘***OTHER’. Incorrect or unknown commands appear under ‘EXEC’. <[>The subtype is indicated in the SMF32TYP field. For information on subtype selectivity see “Selecting subtypes” on page 4-2.
Subtypes 1 and 3 contain data on TSO/E activity since the start of the session or since the last interval record was produced.
Subtypes 2 and 4 contain data on the cumulative TSO/E activity for the entire session. If there is no activity during an interval, no interval record is produced.
If DETAIL is specified in SMFPRMxx, the resource data found under logon represents the resources used from the start of the session to the time when the first command is obtained.
The length of the record is variable.

It's easy to report on SMF 32 data!

We have a low-cost 4GL report writer especially for SMF files. It's called Spectrum SMF Writer.

Spectrum SMF Writer handles the difficult SMF record parsing for you automatically. You just specify which fields you want to see.

Spectrum SMF Writer also converts the arcane date and time fields and reformats them into an attractive report.

Plus, Spectrum SMF Writer can export SMF data as comma delimited files to use on your PC.

SMF Type 32 Record -- TSO/E User Work Accounting
Offset (Dec.)	Offset (Hex)	Name	Length	Format	Description
0	0	SMF32LEN	2	binary	Record length. This field and the next field (total of four bytes) form the RDW (record descriptor word). See “Standard SMF Record Header” on page 13-1 for a detailed description.
2	2	SMF32SEG	2	binary	Segment descriptor (see record length field).
4	4	SMF32FLG	1	binary	System indicator Bit Meaning When Set 0 Subsystem name follows system identification 1 Subtypes used 2 Reserved 3-6 Version indicators* 7 Reserved.*See “Standard SMF Record Header” on page 13-1 for a detailed description.
5	5	SMF32RTY	1	binary	Record type 32 (X'20').
6	6	SMF32TME	4	binary	Time since midnight, in hundredths of a second, that the record was moved into the SMF buffer.
10	A	SMF32DTE	4	packed	Date when the record was moved into the SMF buffer, in the form 0cyydddF. See “Standard SMF Record Header” on page 13-1 for a detailed description.
14	E	SMF32SID	4	EBCDIC	System identification (from the SID parameter).
18	12	SMF32WID	4	EBCDIC	Subsystem identifier.
22	16	SMF32STP	2	binary	Record subtype.
24	18	SMF32POF	4	binary	Offset to product section from start of record, including the record descriptor word (RDW).
28	1C	SMF32PLN	2	binary	Length of product section.
30	1E	SMF32PON	2	binary	Number of product sections.
32	20	SMF32IOF	4	binary	Offset to the identification section from start of record, including the record descriptor word (RDW).
36	24	SMF32ILN	2	binary	Length of the identification section.
38	26	SMF32ION	2	binary	Number of identification sections.
40	28	SMF32COF	4	binary	Offset to the TSO/E command section from start of record, including the record descriptor word (RDW).
44	2C	SMF32CLN	2	binary	Length of the TSO/E command section.
46	2E	SMF32CON	2	binary	Number of TSO/E command sections.
Product Section(Offset from beginning of record: SMF32POF)
0	0	SMF32TYP	2	binary	Subtype identification for the record: 1 — TSO/E user interval record 2 — TSO/E user session end record 3 — TSO/E user interval record (with detail) 4 — TSO/E user session end record (with detail).
2	2	SMF32RVN	2	EBCDIC	Record version number.
4	4	SMF32PNM	8	EBCDIC	Product name.
12	C	SMF32OSL	8	EBCDIC	MVS product name.
20	14	SMF32SYN	8	EBCDIC	System name (from the SYSNAME parameter in the IEASYSxx parmlib member).
28	1C	SMF32SYP	8	EBCDIC	Sysplex name (from the SYSPLEX parameter in the COUPLExx parmlib member).
Identification Section(Offset from beginning of record: SMF32IOF)
0	0	SMF32JBN	8	EBCDIC	TSO user id session name.
8	8	SMF32PGM	8	EBCDIC	Program Name.
16	10	SMF32STM	8	EBCDIC	Step name.
24	18	SMF32UIF	8	EBCDIC	User-defined identification field (taken from common exit parameter area, not from USER=parameter on job statement).
32	20	SMF32JNM	8	EBCDIC	JES job number.
40	28	SMF32STN	2	binary	Step number.
42	2A	--	2	binary	Reserved.
44	2C	SMF32PGN	2	binary	Reserved.
46	2E	SMF32JPT	2	binary	JES input priority at initiation.
48	30	SMF32AST	4	binary	Device allocation start time from midnight, in hundredths of seconds.
52	34	SMF32PPS	4	binary	Problem program start time from midnight, in hundredths of a second.
56	38	SMF32SIT	4	binary	Step initiation time from midnight, in hundredths of a second.
60	3C	SMF32STD	4	packed	Step initiation date, in the form 0cyydddF. See “Standard SMF Record Header” on page 13-1 for a detailed description.
64	40	SMF32RST	4	binary	Reader start time from midnight, in hundredths of second.
68	44	SMF32RSD	4	packed	Reader start date, in the form 0cyydddF. See “Standard SMF Record Header” on page 13-1 for a detailed description.
72	48	SMF32RET	4	binary	Time from midnight, in hundredths of a second, that the reader recognized the end of the job or started task. For TSO/E, this is the logon enqueue time.
76	4C	SMF32RED	4	packed	Date when the reader recognized the end of the batch job or started task, in the form 0cyydddF. See “Standard SMF Record Header” on page 13-1 for a detailed description. For TSO/E, it is the logon enqueue date.
80	50	SMF32USR	20	EBCDIC	Programmer name.
100	64	SMF32GRP	8	EBCDIC	RACF group ID.
108	6C	SMF32RUD	8	EBCDIC	RACF user ID.
116	74	SMF32TID	8	EBCDIC	RACF terminal ID. This field is zero if RACF is not active or if user is not a terminal user.
TSO/E Command Segment (subtypes 1 and 2) This section contains subtypes 1 and 2.(Offset from beginning of record: SMF32COF)
0	0	SMF32_ 12_ CMD	8	EBCDIC	TSO/E command name. See “Performing TSO/E command accounting” on page 4-7 for additional information.
8	8	SMF32_ 12_ CNT	4	binary	Number of times the TSO/E command was entered.
TSO/E Command Segment (subtypes 3 and 4) This section contains subtypes 3 and 4. (Offset from beginning of record: SMF32COF)
0	0	SMF32_ 34_ CMD	8	EBCDIC	TSO/E command name. See “Performing TSO/E command accounting” on page 4-7 for additional information.
8	8	SMF32_ 34_ CNT	4	binary	Number of times the TSO/E command was entered.
12	C	SMF32TCB	4	binary	Total task control block (TCB) time, in hundredths of a second, for the command.
16	10	SMF32SRB	4	binary	Total service request block (SRB) time, in hundredths of a second, for the command.
20	14	SMF32TGT	4	binary	Total TGET (terminal read) count for the command.
24	18	SMF32TPT	4	binary	Total TPUT (terminal output) count for the command.
28	1C	SMF32TRN	4	binary	Total transaction count for the command. Note: See the z/OS MVS Initialization and Tuning Guide for a definition of this field.
32	20	SMF32EXP	4	binary	Total execute channel program (EXCP) count for the command.
36	24	SMF32TCT	4	binary	Total device connect time (in 128 micro-second units) for this command.
40	28	SMF32FLG_ 2	4	binary	Detail section flags Bit Meaning When Set 0 Count in SMF32TRN is not valid.

The table above is based on the description provided by IBM in its "MVS Systems Management Facilities (SMF)" manual.

Spectrum SMF Writer - the 4GL SMF Report Writer.

SMF Type 32 Record

This table shows the record layout for type 32 SMF records (TSO/E User Work Accounting).

It's easy to report on SMF 32 data!

This table shows the record layout for type 32 SMF records
(TSO/E User Work Accounting).