SMF Type 101 Record
This table shows the record layout for type 101 SMF records
(DATABASE 2 Accounting).
List of other SMF record layouts available.
List of sample SMF reports.
Purpose: DATABASE 2 (DB2) writes record type 101 to account for resources during a transaction.
It's easy to report on SMF 101 data! (Jump to sample reports) | |
|
Spectrum SMF Writer handles the difficult SMF record parsing for you automatically. You just specify which fields you want to see. Spectrum SMF Writer also converts the arcane date and time fields and reformats them into an attractive report. Plus, Spectrum SMF Writer can export SMF data as comma delimited files to use on your PC.
|
The Spectrum Writer definitions for the SMF type 101 record below are based on the description provided by IBM in its "MVS Systems Management Facilities (SMF)" manual and/or DSECTs mapped by its Assembler macros.
|
File Definition for Type 101 SMF Records DATABASE 2 Accounting
***********************************************************************
* SPECTRUM SMF WRITER -- FILE DEFINITION STATEMENTS *
* SMF TYPE 101 RECORD - "DATABASE 2 ACCOUNTING" *
***********************************************************************
OPTION: MISSOFFSET /* TREAT OFFSET ERRORS (99999) LIKE MISSING DATA */
OPTION: STCKADJ(0) /* NO GMT TO LOCAL CONVERSION - DURATIONS*/
**********************************************************************
* DB2 SUBTYPE 0 ACCOUNTING RECORD SECTION MAPPING. *
* SMF EXTERNALIZED AS A SMF TYPE 101 RECORD *
*(SEE SYSTEM PLANNING AND ADMINISTRATION GUIDE FOR ADDITIONAL DETAIL)*
**********************************************************************
* * *
* DSECT MACRO * DESCRIPTION OF SECTIONS IN RECORD *
* * *
*--------------------------------------------------------------------*
* SM101 DSNDQWAS * SMF HEADER SECTION *
*--------------------------------------------------------------------*
* IFCID 0003 FOLLOWS *
* NOTE: FIELDS DEFINED AS CHARACTER MAY CONTAIN HEX DATA *
*--------------------------------------------------------------------*
* *
* QWA0 DSNDQWA0 * SELF DEFINING SECTION - NOTE: USE OFFSETS
* * IN QWA0 TO GET TO THE FOLLOWING SECTIONS
* * BECAUSE THEIR EXACT POSITION VARIES
*----------------------*
* * See DSNDQWA0 for parsing algorithm for
* * varying length repeating group section(s):
* * QLAC
* *
* * Important rollup information: A rollup
* * IFCID3 will not contain data sections
* * 5, 6, 7, and 11 mapped by DSNDQLAC,
* * DSNDQMDA, DSNDQIFA, and DSNDQWDA
* * respectively. These data sections are
* * NOT rolled up.
* *
* * PRODUCT SECTION. THE SECTION
* * NORMALLY APPEARS AT THE END OF RECORD.
* QWHS DSNDQWHS * STANDARD HEADER ALWAYS PRESENT
* QWHC DSNDQWHC * CORRELATION HEADER PRESENT ON ACCOUNTING
* QWHT DSNDQWHT * TRACE HEADER MAY APPEAR
* QWHU DSNDQWHU * CPU HEADER MAY APPEAR
* QWHD DSNDQWHD * DISTRIBUTED HEADER PRESENT ON ACCOUNTING
* QWHA DSNDQWHA * DATA SHARING HEADER
* *FOLLOWING SECTIONS BEGIN ON A WORD BOUNDARY
* QWAC DSNDQWAC * IFC ACCOUNTING INFORMATION
* QXST DSNDQXST * SQL ACCOUNTING
* QBAC DSNDQBAC * BUFFER MANAGER ACCOUNTING
* QTXA DSNDQTXA * LOCKING ACCOUNTING
* QLAC DSNDQLAC * DDF ACCOUNTING
* QMDA DSNDQMDA * MVS AND DDF ACCOUNTING INFORMATION
* QIFA DSNDQIFA * CHANGED DATA CAPTURE ACCOUNTING
* QBGA DSNDQBGA * BUFFER MANAGER DATA SHARING ACCOUNTING
* QTGA DSNDQTGA * DATA SHARING GLOBAL LOCKING ACCOUNTING
* QWDA DSNDQWDA * DATA SHARING ACCOUNTING DATA MAPPING
* QWAX DSNDQWAX * ACCOUNTING CLASS 3 OVERFLOW
************************
*
*
FLD: QWAS LEN(4) TYPE(BIN) DISP(0)
* SMF COMMON HEADER MAPPING MACRO FOR ACCOUNTING (SMF 101)
FLD: SM101LEN LEN(2) DISP(0) /*SM101 TOTAL LENGTH*/
FLD: SM101SGD LEN(2) DISP(2) /*ZZ BYTES*/
FLD: SM101FLG LEN(1) DISP(4) /*SYSTEM INDICATOR*/
FLD: SM101RTY LEN(1) DISP(5) /*RECORD TYPE X'65'*/
FLD: SM101TME LEN(4) TYPE(B-SECS) DISP(6) DEC(2)
/*TIME SMF MOVED RECORD*/
FLD: SM101DTE TYPE(P-CYYDDD) DISP(10) /*DATE SMF MOVED RECORD*/
FLD: SM101SID LEN(4) DISP(14) /*SYSTEM ID (SID)*/
FLD: SM101SSI LEN(4) DISP(18) /*SUBSYSTEM ID*/
FLD: SM101STF LEN(1) DISP(22) /*RESERVED*/
FLD: SM101RI LEN(1) DISP(23) /*RESERVED*/
FLD: SM101SQ LEN(4) DISP(24) /*RESERVED*/
FLD: SM101BUF LEN(4) DISP(24) /*TEMPORARY POINTER TO BUFFER AREA*/
FLD: SM101END LEN(1) DISP(28) /*START OF THE SELF DEFINING SECTION*/
***********************************************************************
**** QWA0 DSECT
***********************************************************************
FLD: QWA0 DISP(0) LEN(1) OFFSET(28)
*
* /* DB2 SELF DEFINING SECTION MACRO FOR ACCOUNTING IFCID=0003 */
*
* /* PRODUCT SECTION FOR ACCOUNTING CONTAINS TWO HEADERS
* 1.THE STANDARD HEADER IS MAPPED BY DSNDQWHS
* 2.THE CORRELATION HEADER IS MAPPED BY DSNDQWHC */
*
FLD: QWA01PSO LEN(4) TYPE(BIN) DISP(0)
/*OFFSET TO THE PRODUCT SECTION*/
FLD: QWA01PSL LEN(2) TYPE(BIN) DISP(4)
/*LENGTH OF THE PRODUCT SECTION*/
FLD: QWA01PSN LEN(2) TYPE(BIN) DISP(6) /*NUMBER OF PRODUCT SECTIONS*/
* /* FOR RMID 026 MAPPED BY DSNDQWAC */
FLD: QWA01R1O LEN(4) TYPE(BIN) DISP(8) /*OFFSET TO THE DATA SECTION*/
FLD: QWA01R1L LEN(2) TYPE(BIN) DISP(12) /*LENGTH OF THE DATA SECTION*/
FLD: QWA01R1N LEN(2) TYPE(BIN) DISP(14) /*NUMBER OF DATA SECTIONS*/
* /* FOR RMID XXX MAPPED BY DSNDQXST SQL */
FLD: QWA01R2O LEN(4) TYPE(BIN) DISP(16) /*OFFSET TO THE DATA SECTION*/
FLD: QWA01R2L LEN(2) TYPE(BIN) DISP(20) /*LENGTH OF THE DATA SECTION*/
FLD: QWA01R2N LEN(2) TYPE(BIN) DISP(22) /*NUMBER OF DATA SECTIONS*/
* /* FOR RMID XXX MAPPED BY DSNDQBAC BUFFER MANAGER */
FLD: QWA01R3O LEN(4) TYPE(BIN) DISP(24) /*OFFSET TO THE DATA SECTION*/
FLD: QWA01R3L LEN(2) TYPE(BIN) DISP(28) /*LENGTH OF THE DATA SECTION*/
FLD: QWA01R3N LEN(2) TYPE(BIN) DISP(30) /*NUMBER OF DATA SECTIONS*/
* /* FOR RMID XXX MAPPED BY DSNDQTXA LOCK MANAGER */
FLD: QWA01R4O LEN(4) TYPE(BIN) DISP(32) /*OFFSET TO THE DATA SECTION*/
FLD: QWA01R4L LEN(2) TYPE(BIN) DISP(36) /*LENGTH OF THE DATA SECTION*/
FLD: QWA01R4N LEN(2) TYPE(BIN) DISP(38) /*NUMBER OF DATA SECTIONS*/
* /* FOR RMID XXX MAPPED BY DSNDQLAC - DDF - V2R2 */
FLD: QWA01R5O LEN(4) TYPE(BIN) DISP(40) /*OFFSET TO THE DATA SECTION*/
FLD: QWA01R5L LEN(2) TYPE(BIN) DISP(44) /*LENGTH OF THE DATA SECTION*/
FLD: QWA01R5N LEN(2) TYPE(BIN) DISP(46) /*NUMBER OF DATA SECTIONS*/
* /* FOR RMID XXX MAPPED BY DSNDQMDA - MVS AND DDF - V2R3 */
FLD: QWA01R6O LEN(4) TYPE(BIN) DISP(48) /*OFFSET TO THE DATA SECTION*/
FLD: QWA01R6L LEN(2) TYPE(BIN) DISP(52) /*LENGTH OF THE DATA SECTION*/
FLD: QWA01R6N LEN(2) TYPE(BIN) DISP(54) /*NUMBER OF DATA SECTIONS*/
* /* FOR RMID 026 MAPPED BY DSNDQIFA - IFI ACCOUNTING - V3R1 */
FLD: QWA01R7O LEN(4) TYPE(BIN) DISP(56) /*OFFSET TO THE DATA SECTION*/
FLD: QWA01R7L LEN(2) TYPE(BIN) DISP(60) /*LENGTH OF THE DATA SECTION*/
FLD: QWA01R7N LEN(2) TYPE(BIN) DISP(62) /*NUMBER OF DATA SECTIONS*/
* /* Currently reserved - previously used for package accounting */
FLD: QWA01R8O LEN(4) TYPE(BIN) DISP(64) /*OFFSET TO THE DATA SECTION*/
FLD: QWA01R8L LEN(2) TYPE(BIN) DISP(68) /*LENGTH OF THE DATA SECTION*/
FLD: QWA01R8N LEN(2) TYPE(BIN) DISP(70) /*NUMBER OF DATA SECTIONS*/
* /* FOR RMID 010 MAPPED BY DSNDQBGA - BUF MGR DATA SHR ACCT */
FLD: QWA01R9O LEN(4) TYPE(BIN) DISP(72) /*OFFSET TO THE DATA SECTION*/
FLD: QWA01R9L LEN(2) TYPE(BIN) DISP(76) /*LENGTH OF THE DATA SECTION*/
FLD: QWA01R9N LEN(2) TYPE(BIN) DISP(78) /*NUMBER OF DATA SECTIONS*/
* /* FOR RMID 020 MAPPED BY DSNDQTGA - GLBL DATA SHR ACCT */
FLD: QWA01RAO LEN(4) TYPE(BIN) DISP(80) /*OFFSET TO THE DATA SECTION*/
FLD: QWA01RAL LEN(2) TYPE(BIN) DISP(84) /*LENGTH OF THE DATA SECTION*/
FLD: QWA01RAN LEN(2) TYPE(BIN) DISP(86) /*NUMBER OF DATA SECTIONS*/
* /* FOR RMID 026 MAPPED BY DSNDQWDA - DATA SHARING ACCT. V4R1 */
FLD: QWA01RBO LEN(4) TYPE(BIN) DISP(88) /*OFFSET TO THE DATA SECTION*/
FLD: QWA01RBL LEN(2) TYPE(BIN) DISP(92) /*LENGTH OF THE DATA SECTION*/
FLD: QWA01RBN LEN(2) TYPE(BIN) DISP(94) /*NUMBER OF DATA SECTIONS*/
* /* FOR RMID 026 MAPPED BY DSNDQWAX - ACCTG CLASS 3 OVERFLOW. V6 */
FLD: QWA01RCO LEN(4) TYPE(BIN) DISP(96) /*OFFSET TO THE DATA SECTION*/
FLD: QWA01RCL LEN(2) TYPE(BIN) DISP(100) /*LENGTH OF THE DATA SECTION*/
FLD: QWA01RCN LEN(2) TYPE(BIN) DISP(102) /*NUMBER OF DATA SECTIONS*/
FLD: QWA01END LEN(1) DISP(104) /*END OF THE SELF DEFINING SECTION*/
*
***********************************************************************
* DB2 DSNDQWAS SUBTYPE=1 ACCOUNTING RECORD SECTION MAPPING FOR *
* OVERFLOW PACKAGE/DBRM ACCOUNTING INFORMATION *
* *
* THE RECORD IS WRITTEN TO SMF AS A SMF TYPE 101 RECORD *
*(SEE SYSTEM PLANNING AND ADMINISTRATION GUIDE FOR ADDITIONAL DETAIL) *
***********************************************************************
* DSECT MACRO * DESCRIPTION OF SECTIONS IN RECORD *
*---------------------------------------------------------------------*
* SM101 DSNDQWAS * SMF HEADER SECTION *
*
* NOTE: FIELDS DEFINED AS CHARACTER MAY CONTAIN HEX DATA
*---------------------------------------------------------------------*
* * IFCID 0239 FOLLOWS:
* QWA1 DSNDQWA1 * SELF DEFINING SECTION - NOTE: USE OFFSETS
* * IN QWA1 TO GET TO THE FOLLOWING SECTIONS
*----------------------* BECAUSE THEIR EXACT POSITION VARIES
* *
* * See DSNDQWA1 for parsing algorithm for
* * varying length repeating group section(s):
* * QPAC
* *
* * Important package detail information: An
* * IFCID 239 will consist of only data sections
* * 1 and 2 mapped by DSNDQPKG and DSNDQPAC when
* * accounting or monitor class 10 are NOT on.
* * When either accounting or monitor class 10 is
* * ON, package detail is enabled and data
* * sections 3, 4, and 5 mapped by DSNDQXPK,
* * DSNDQBAC, and DSNDQTXA will be written.
* * If package detail is enabled and accounting
* * or monitor classes 7 or 8 are not ON, no
* * IFCID239 will be written. Thus it is not
* * possible to have an IFCID239 record with
* * package detail information but no class
* * 7 or class 8 data.
* *
* * Important rollup information: An IFCID 239
* * will contain rollup data if the
* * corresponding IFCID 3 record is a rollup
* * record (i.e.,QWACPARR bit set in QWACFLGS).
* * A rollup IFCID 239 record will consist of
* * headers + 1 QPKG + 1 QPAC section. The QPAC
* * will represent all package level activity
* * for the threads rolled into the
* * corresponding IFCID 3 record. No other data
* * sections are rolled up at the package level
* * regardless of the enablement of accounting
* * or monitor class 10.
* *
* *FOLLOWING SECTIONS BEGIN ON A WORD BOUNDARY
* * PRODUCT SECTION. THE SECTION
* * NORMALLY APPEARS AT THE END OF RECORD
* *
* QWHS DSNDQWHS * STANDARD HEADER ALWAYS APPEARS
* QWHC DSNDQWHC * CORRELATION HEADER MAY APPEAR
* QWHT DSNDQWHT * TRACE HEADER MAY APPEAR
* QWHU DSNDQWHU * CPU HEADER MAY APPEAR
* QWHD DSNDQWHD * DISTRIBUTED HEADER MAY APPEAR
* QWHA DSNDQWHA * DATA SHARING HEADER MAY APPEAR
* QPKG DSNDQPKG * Tracking which pkgs are in each 239 record
* QPAC DSNDQPAC * General package accounting.
* QXPK DSNDQXPK * RDS accounting
* QBAC DSNDQBAC * Buffer manager accounting
* QTXA DSNDQTXA * Locking accounting
************************
***********************************************************************
**** QWA1 DSECT
***********************************************************************
FLD: QWA1 DISP(0) LEN(1) OFFSET(28)
*
* /* DB2 SELF DEFINING SECTION MACRO FOR ACCOUNTING IFCID=0239 */
*
* /* PRODUCT SECTION FOR ACCOUNTING CONTAINS TWO HEADERS
* 1.THE STANDARD HEADER IS MAPPED BY DSNDQWHS
* 2.THE CORRELATION HEADER IS MAPPED BY DSNDQWHC */
*
FLD: QWA11PSO LEN(4) TYPE(BIN) DISP(0)
/*OFFSET TO THE PRODUCT SECTION*/
FLD: QWA11PSL LEN(2) TYPE(BIN) DISP(4)
/*LENGTH OF THE PRODUCT SECTION*/
FLD: QWA11PSN LEN(2) TYPE(BIN) DISP(6) /*NUMBER OF PRODUCT SECTIONS*/
* /* MAPPED BY DSNDQPKG */
FLD: QWA11R1O LEN(4) TYPE(BIN) DISP(8) /*OFFSET TO THE DATA SECTION*/
FLD: QWA11R1L LEN(2) TYPE(BIN) DISP(12) /*LENGTH OF THE DATA SECTION*/
FLD: QWA11R1N LEN(2) TYPE(BIN) DISP(14) /*NUMBER OF DATA SECTIONS*/
* /* MAPPED BY DSNDQPAC */
FLD: QWA11R2O LEN(4) TYPE(BIN) DISP(16) /*OFFSET TO THE DATA SECTION*/
FLD: QWA11R2L LEN(2) TYPE(BIN) DISP(20) /*LENGTH OF THE DATA SECTION*/
FLD: QWA11R2N LEN(2) TYPE(BIN) DISP(22) /*NUMBER OF DATA SECTIONS*/
* /* MAPPED BY DSNDQXPK */
FLD: QWA11R3O LEN(4) TYPE(BIN) DISP(24) /*OFFSET TO THE DATA SECTION*/
FLD: QWA11R3L LEN(2) TYPE(BIN) DISP(28) /*LENGTH OF THE DATA SECTION*/
FLD: QWA11R3N LEN(2) TYPE(BIN) DISP(30) /*NUMBER OF DATA SECTIONS*/
* /* MAPPED BY DSNDQBAC */
FLD: QWA11R4O LEN(4) TYPE(BIN) DISP(32) /*OFFSET TO THE DATA SECTION*/
FLD: QWA11R4L LEN(2) TYPE(BIN) DISP(36) /*LENGTH OF THE DATA SECTION*/
FLD: QWA11R4N LEN(2) TYPE(BIN) DISP(38) /*NUMBER OF DATA SECTIONS*/
* /* MAPPED BY DSNDQTXA */
FLD: QWA11R5O LEN(4) TYPE(BIN) DISP(40) /*OFFSET TO THE DATA SECTION*/
FLD: QWA11R5L LEN(2) TYPE(BIN) DISP(44) /*LENGTH OF THE DATA SECTION*/
FLD: QWA11R5N LEN(2) TYPE(BIN) DISP(46) /*NUMBER OF DATA SECTIONS*/
***********************************************************************
**** QWHS DSECT
***********************************************************************
COMP: QWHS_OFFSET =
WHEN(SM101RTY=101 AND QWA01PSN > 0) ASSIGN(QWA01PSO)
ELSE ASSIGN(99999)
FLD: QWHS DISP(0) LEN(1) OFFSET(QWHS_OFFSET)
*
*
***********************************************************************
*** **
*** INSTRUMENTATION STANDARD HEADER DATA IN PRODUCT SECTION **
*** **
***********************************************************************
*
FLD: QWHSLEN LEN(2) TYPE(BIN) DISP(0)
/*LENGTH OF THE STANDARD HEADER*/
FLD: QWHSTYP LEN(1) DISP(2) /*HEADER TYPE*/
*
* ** HEADER TYPE CONSTANTS **
COMP: QWHSHS01 = 1 /*..STANDARD HEADER*/
COMP: QWHSHC02 = 2 /*..CORRELATION HEADER*/
COMP: QWHSHT04 = 4 /*..TRACE HEADER*/
COMP: QWHSHU08 = 8 /*..CPU HEADER*/
COMP: QWHSHD16 = 16 /*..DISTRIBUTED HEADER*/
COMP: QWHSHA32 = 32 /*..DATA SHARING HEADER*/
FLD: QWHSRMID LEN(1) DISP(3) /*RESOURCE MANAGER ID*/
FLD: QWHSIID TYPE(HALF) DISP(4) /*IFCID*/
FLD: QWHSRELN LEN(2) DISP(6) /*RELEASE NUMBER AREA*/
FLD: QWHSNSDA LEN(1) TYPE(BIN) DISP(6)
/*NUMBER OF SELF DEFINING AREAS*/
*
FLD: QWHSRN LEN(1) DISP(7) /*RELEASE INDICATOR NUMBER HEX*/
*
FLD: QWHSACE LEN(4) TYPE(BIN) DISP(8)
/*ACE ADDRESS DISPATCH UNIT ADDRESS*/
FLD: QWHSSSID LEN(4) DISP(12) /*SUBSYSTEM NAME*/
FLD: QWHSSTCK TYPE(STCKTIME) DISP(16) /*STORE CLOCK VALUE OF HEADER*/
* For data sharing, this is the sysplex
* timer value.
*
* *********************************************************************
* * NOTE- THE FOLLOWING SEQUENCE NUMBERS ARE UNIQUE WITHIN A SINGLE *
* * SUBSYSTEM INSTANCE AND ARE INITIALIZED TO ZERO ON RESTART. *
* * BECAUSE OF MP CONSIDERATIONS THE NUMBERS MAY NOT ALWAYS BE *
* * IN ASCENDING ORDER. *
* *********************************************************************
*
FLD: QWHSISEQ LEN(4) DISP(24) /*SEQUENCE NUMBER FOR IFCID*/
FLD: QWHSWSEQ LEN(4) DISP(28) /*SEQUENCE NUMBER FOR DESTINATION*/
FLD: QWHSMTN LEN(4) DISP(32) /*ACTIVE TRACE NUMBER MASK*/
FLD: QWHSLOCN LEN(16) DISP(36) /*%U LOCAL LOCATION NAME*/
* Truncated if QWHSLOCN_Off¬=0
FLD: QWHSLWID LEN(24) DISP(52) /*LUWID*/
FLD: QWHSNID LEN(8) DISP(52) /*NETWORK ID*/
FLD: QWHSLUNM LEN(8) DISP(60) /*LUNAME*/
FLD: QWHSLUUV LEN(6) DISP(68) /*UNIQUENESS VALUE*/
FLD: QWHSLUCC LEN(2) TYPE(BIN) DISP(74) /*COMMIT COUNT*/
FLD: QWHSFLAG LEN(1) DISP(76) /*Flags*/
COMP: QWHS_UNICODE = X'80' /*%U fields contain Unicode (UTF 8)*/
FLD: QWHSLOCN_OFF TYPE(HALF) DISP(78) /*Offset from QWHS to*/
* LOCAL LOCATION NAME
* If QWHSLOCN truncated
FLD: QWHSSUBV TYPE(HALF) DISP(80)
/*THE SUBVERSION FOR THE BASE RELEASE*/
FLD: QWHSEND LEN(1) DISP(82) /*END OF STANDARD HEADER*/
*
*
*
***********************************************************************
**** QWHSLOCN_D DSECT Use if QWHSLOCN_Off¬=0
***********************************************************************
COMP: QWHSLOCN_D_OFFSET =
WHEN(QWHS_OFFSET <> 99999 AND QWHSLOCN_Off <> 0)
ASSIGN(QWHS_OFFSET + QWHSLOCN_Off)
ELSE ASSIGN(99999)
FLD: QWHSLOCN_D DISP(0) LEN(1) OFFSET(QWHSLOCN_D_OFFSET)
/*Use if QWHSLOCN_Off¬ 0*/
*
FLD: QWHSLOCN_LEN TYPE(HALF) DISP(0) /*Length of the following field*/
FLD: QWHSLOCN_VAR LEN(128) DISP(2)/*%U LOCAL LOCATION NAME*/
*
***THE FOLLOWING VALUES DEFINE THE IFCID IN QWHSIID **
*** RMID: DESCRIPTION: **
COMP: QWHS0000 = 0 /*..DEFAULT NORMAL TRACE RECORDS*/
COMP: QWHS0001 = 1 /*26 ..SYSTEM STATISTICS*/
COMP: QWHS0002 = 2 /*26 ..DATA BASE STATISTICS*/
COMP: QWHS0003 = 3 /*26 ..ACCOUNTING*/
**** USE THESE TO QUICKLY ID RECORD TYPE
COMP: SMF101_IFCID3 = WHEN(QWHSIID=3) ASSIGN(#ON)
COMP: SMF101_IFCID239 = WHEN(QWHSIID=239) ASSIGN(#ON)
*
*
***********************************************************************
* SOME OR ALL OF THESE HEADERS MAY NOW FOLLOW THE STD HEADER:
* QWHC DSNDQWHC * CORRELATION HEADER PRESENT ON ACCOUNTING
* QWHT DSNDQWHT * TRACE HEADER MAY APPEAR
* QWHU DSNDQWHU * CPU HEADER MAY APPEAR
* QWHD DSNDQWHD * DISTRIBUTED HEADER PRESENT ON ACCOUNTING
* QWHA DSNDQWHA * DATA SHARING HEADER
***********************************************************************
COMPUTE: PSHDR_MAX_OFFSET = QWA01PSO + QWA01PSL /* -> PAST ALL HDRS*/
*
***********************************************************************
* DEFINE JUST THE LENGTH AND TYPE OF THE 2ND HEADER SECTION PRESENT *
***********************************************************************
COMPUTE: PSHDR_2_TEST_OFFSET = QWA01PSO + QWHSLEN
COMPUTE: PSHDR_2_OFFSET =
WHEN(PSHDR_2_TEST_OFFSET >= PSHDR_MAX_OFFSET) ASSIGN(99999)
ELSE ASSIGN(PSHDR_2_TEST_OFFSET)
FIELD: PSHDR_2_LEN DISP(0) LEN(2) TYPE(BIN) OFFSET(PSHDR_2_OFFSET)
FIELD: PSHDR_2_TYP DISP(2) LEN(1) TYPE(BIN)
*
***********************************************************************
* DEFINE JUST THE LENGTH AND TYPE OF THE 3RD SECTION PRESENT *
***********************************************************************
COMPUTE: PSHDR_3_TEST_OFFSET = PSHDR_2_OFFSET + PSHDR_2_LEN
COMPUTE: PSHDR_3_OFFSET =
WHEN(PSHDR_3_TEST_OFFSET >= PSHDR_MAX_OFFSET) ASSIGN(99999)
ELSE ASSIGN(PSHDR_3_TEST_OFFSET)
*
FIELD: PSHDR_3_LEN DISP(0) LEN(2) TYPE(BIN) OFFSET(PSHDR_3_OFFSET)
FIELD: PSHDR_3_TYP DISP(2) LEN(1) TYPE(BIN)
*
***********************************************************************
* DEFINE JUST THE LENGTH AND TYPE OF THE 4TH SECTION PRESENT *
***********************************************************************
COMPUTE: PSHDR_4_TEST_OFFSET = PSHDR_3_OFFSET + PSHDR_3_LEN
COMPUTE: PSHDR_4_OFFSET =
WHEN(PSHDR_4_TEST_OFFSET >= PSHDR_MAX_OFFSET) ASSIGN(99999)
ELSE ASSIGN(PSHDR_4_TEST_OFFSET)
*
FIELD: PSHDR_4_LEN DISP(0) LEN(2) TYPE(BIN) OFFSET(PSHDR_4_OFFSET)
FIELD: PSHDR_4_TYP DISP(2) LEN(1) TYPE(BIN)
*
*
***********************************************************************
* DEFINE JUST THE LENGTH AND TYPE OF THE 5TH SECTION PRESENT *
***********************************************************************
COMPUTE: PSHDR_5_TEST_OFFSET = PSHDR_4_OFFSET + PSHDR_4_LEN
COMPUTE: PSHDR_5_OFFSET =
WHEN(PSHDR_5_TEST_OFFSET >= PSHDR_MAX_OFFSET) ASSIGN(99999)
ELSE ASSIGN(PSHDR_5_TEST_OFFSET)
*
FIELD: PSHDR_5_LEN DISP(0) LEN(2) TYPE(BIN) OFFSET(PSHDR_5_OFFSET)
FIELD: PSHDR_5_TYP DISP(2) LEN(1) TYPE(BIN)
*
************************************************************************
* DEFINE JUST THE LENGTH AND TYPE OF THE 6TH SECTION PRESENT *
***********************************************************************
COMPUTE: PSHDR_6_TEST_OFFSET = PSHDR_5_OFFSET + PSHDR_5_LEN
COMPUTE: PSHDR_6_OFFSET =
WHEN(PSHDR_6_TEST_OFFSET >= PSHDR_MAX_OFFSET) ASSIGN(99999)
ELSE ASSIGN(PSHDR_6_TEST_OFFSET)
*
FIELD: PSHDR_6_LEN DISP(0) LEN(2) TYPE(BIN) OFFSET(PSHDR_6_OFFSET)
FIELD: PSHDR_6_TYP DISP(2) LEN(1) TYPE(BIN)
*
*
***********************************************************************
**** QWHA DSECT
***********************************************************************
COMP: QWHA_OFFSET =
WHEN(PSHDR_2_TYP = QWHSHA32) ASSIGN(PSHDR_2_OFFSET)
WHEN(PSHDR_3_TYP = QWHSHA32) ASSIGN(PSHDR_3_OFFSET)
WHEN(PSHDR_4_TYP = QWHSHA32) ASSIGN(PSHDR_4_OFFSET)
WHEN(PSHDR_5_TYP = QWHSHA32) ASSIGN(PSHDR_5_OFFSET)
WHEN(PSHDR_6_TYP = QWHSHA32) ASSIGN(PSHDR_6_OFFSET)
ELSE ASSIGN(99999)
FLD: QWHA DISP(0) LEN(1) OFFSET(QWHA_OFFSET)
*
* /**************************************/
* /*INSTRUMENTATION DATA SHARING HEADER */
* /**************************************/
*
FLD: QWHALEN LEN(2) TYPE(BIN) DISP(0) /*LENGTH OF HEADER*/
FLD: QWHATYP LEN(1) DISP(2) /*TYPE OF HEADER DATA SHARING*/
* /* NAME - QWHSHA32 */
FLD: QWHAMEMN LEN(8) DISP(4) /*DB2 MEMBER NAME*/
* /* WITHIN A DB2 DATA SHARING GROUP, EACH */
* /* MEMBER DB2 HAS A NAME. */
FLD: QWHADSGN LEN(8) DISP(12) /*DB2 DATA SHARING GROUP NAME*/
FLD: QWHAEND LEN(1) DISP(20)
***********************************************************************
**** QWHU DSECT
***********************************************************************
COMP: QWHU_OFFSET =
WHEN(PSHDR_2_TYP = QWHSHU08) ASSIGN(PSHDR_2_OFFSET)
WHEN(PSHDR_3_TYP = QWHSHU08) ASSIGN(PSHDR_3_OFFSET)
WHEN(PSHDR_4_TYP = QWHSHU08) ASSIGN(PSHDR_4_OFFSET)
WHEN(PSHDR_5_TYP = QWHSHU08) ASSIGN(PSHDR_5_OFFSET)
WHEN(PSHDR_6_TYP = QWHSHU08) ASSIGN(PSHDR_6_OFFSET)
ELSE ASSIGN(99999)
FLD: QWHU DISP(0) LEN(1) OFFSET(QWHU_OFFSET)
* /*INSTRUMENTATION CPU HEADER DATA */
FLD: QWHULEN LEN(2) TYPE(BIN) DISP(0) /*LENGTH OF HEADER*/
FLD: QWHUTYP LEN(1) DISP(2) /*TYPE OF HEADER CPU MAPPED QWHSHU08*/
FLD: QWHUCPU TYPE(STCKTIME) DISP(4)
/*CPU time of the currently dispatched*/
* /* execution unit (TCB or SRB). This */
* /* time includes CPU consumed on an IBM */
* /* ZIIP. Note: A given ACE token may */
* /* run under one or more MVS dispatchable*/
* /* execution units. Thus the CPU time for*/
* /* a given ACE may decrease between */
* /* events. Binary zero indicates */
* /* CPU time was not available. */
FLD: QWHUCNT LEN(2) DISP(12) /*(S) COUNT FIELD RESERVED*/
FLD: QWHUEND LEN(1) DISP(14)
***********************************************************************
**** QWHT DSECT
***********************************************************************
COMP: QWHT_OFFSET =
WHEN(PSHDR_2_TYP = QWHSHT04) ASSIGN(PSHDR_2_OFFSET)
WHEN(PSHDR_3_TYP = QWHSHT04) ASSIGN(PSHDR_3_OFFSET)
WHEN(PSHDR_4_TYP = QWHSHT04) ASSIGN(PSHDR_4_OFFSET)
WHEN(PSHDR_5_TYP = QWHSHT04) ASSIGN(PSHDR_5_OFFSET)
WHEN(PSHDR_6_TYP = QWHSHT04) ASSIGN(PSHDR_6_OFFSET)
ELSE ASSIGN(99999)
FLD: QWHT DISP(0) LEN(1) OFFSET(QWHT_OFFSET)
* /*INSTRUMENTATION TRACE HEADER DATA */
FLD: QWHTLEN LEN(2) TYPE(BIN) DISP(0) /*LENGTH OF HEADER*/
FLD: QWHTTYP LEN(1) DISP(2) /*TYPE OF HEADER TRACE*/
FLD: QWHTFLG0 LEN(1) DISP(3) /*FLAGS*/
COMP: QWHTALFG = X'20' /*ON DATA USES ALET TOKEN*/
FLD: QWHTTID TYPE(HALF) DISP(4) /*ID SPECIFIED DSNWTRC MACRO*/
FLD: QWHTTAG LEN(1) DISP(6) /*TAG SPECIFIED DSNWTRC MACRO*/
FLD: QWHTFUNC LEN(1) DISP(7) /*FUNC SPECIFIED DSNWTRC MACRO*/
FLD: QWHTEB LEN(4) TYPE(BIN) DISP(8) /*EB ADDRESS*/
FLD: QWHTPASI TYPE(HALF) DISP(12) /*PASID EPAR*/
* /*FOLLOWING FIELDS BELONG TO CALLERS MODULE WHICH INVOKED TRACE*/
FLD: QWHTR14A TYPE(HALF) DISP(14) /*REGISTER 14 ASID*/
FLD: QWHTR14 LEN(4) TYPE(BIN) DISP(16) /*REGISTER 14*/
FLD: QWHTR15 LEN(4) TYPE(BIN) DISP(20) /*REGISTER 15*/
FLD: QWHTR0 LEN(4) TYPE(BIN) DISP(24) /*REGISTER 0*/
FLD: QWHTR1 LEN(4) TYPE(BIN) DISP(28) /*REGISTER 1*/
FLD: QWHTEXU LEN(4) TYPE(BIN) DISP(32)
/*ADDRESS OF MVS EXECUTION UNIT*/
FLD: QWHTDIM TYPE(HALF) DISP(36) /*NUMBER OF DATA ITEMS*/
FLD: QWHTHASI TYPE(HALF) DISP(38) /*HOME ASID*/
* /*THE FOLLOWING FIELDS REPEAT FOR EACH DATA ITEM */
FLD: QWHTDATA LEN(4) TYPE(BIN) DISP(40) /*ADDRESS OF THE DATA*/
FLD: QWHTFLAG TYPE(HALF) DISP(44) /*FLAGS IN THE TRACE LIST*/
FLD: QWHTDATL TYPE(HALF) DISP(46) /*LENGTH OF THE DATA*/
FLD: QWHTEND LEN(4) TYPE(BIN) DISP(48)
FLD: QWHTALET LEN(4) TYPE(BIN) DISP(48) /*ALET TOKEN FOR DATA FIELD*/
*
***********************************************************************
**** QWHC DSECT
***********************************************************************
COMP: QWHC_OFFSET =
WHEN(PSHDR_2_TYP = QWHSHC02) ASSIGN(PSHDR_2_OFFSET)
WHEN(PSHDR_3_TYP = QWHSHC02) ASSIGN(PSHDR_3_OFFSET)
WHEN(PSHDR_4_TYP = QWHSHC02) ASSIGN(PSHDR_4_OFFSET)
WHEN(PSHDR_5_TYP = QWHSHC02) ASSIGN(PSHDR_5_OFFSET)
WHEN(PSHDR_6_TYP = QWHSHC02) ASSIGN(PSHDR_6_OFFSET)
ELSE ASSIGN(99999)
FLD: QWHC DISP(0) LEN(1) OFFSET(QWHC_OFFSET)
*
*/*****************************************************************/
*/* */
*/* INSTRUMENTATION CORRELATION DATA */
*/* */
*/*****************************************************************/
*
FLD: QWHCLEN LEN(2) TYPE(BIN) DISP(0)
/*LENGTH OF THE CORRELATION HEADER*/
FLD: QWHCTYP LEN(1) DISP(2) /*TYPE OF HEADER CORRELATION 2*/
FLD: QWHCAID LEN(8) DISP(4) /*%U AUTHORIZATION ID*/
* /* Truncated if QWHCAID_Off¬=0 */
FLD: QWHCCV LEN(12) DISP(12) /*CORRELATION ID VALUE*/
FLD: QWHCCN LEN(8) DISP(24)
/*CONNECTION NAME (NOT VALID ON END OF MEMORY &*/
* REFLECTS THE MVS HOME ASID CONNECTION NAME) */
FLD: QWHCPLAN LEN(8) DISP(32) /*PLAN NAME*/
FLD: QWHCOPID LEN(8) DISP(40) /*%U ORIGINAL OPERATOR ID*/
* /* Truncated if QWHCOPID_Off¬=0 */
FLD: QWHCATYP LEN(4) TYPE(BIN) DISP(48) /*CONNECTING SYSTEM TYPE CODE*/
FLD: QWHCTOKN LEN(22) DISP(52) /*ACCOUNTING TOKEN*/
FLD: QWHCRES2 LEN(2) DISP(74) /*RESERVED*/
FLD: QWHCEUID LEN(16) DISP(76) /*THE END USER'S USERID AT THE*/
* /* USER'S WORKSTATION. */
* /* Truncated if QWHCOPID_Off¬=0 */
FLD: QWHCEUTX LEN(32) DISP(92) /*THE END USER'S TRANSACTION NAME.*/
FLD: QWHCEUWN LEN(18) DISP(124) /*THE END USER'S WORKSTATION NAME.*/
*
FLD: QWHCAID_OFF TYPE(HALF) DISP(142) /*Offset from QWHC to*/
* /* AUTHORIZATION ID */
* /* If QWHCAID truncated */
FLD: QWHCOPID_OFF TYPE(HALF) DISP(144) /*Offset from QWHC to*/
* /* ORIGINAL OPERATOR ID */
* /* If QWHCOPID truncated */
FLD: QWHCEUID_OFF TYPE(HALF) DISP(146) /*Offset from QWHC to*/
* /* THE END USER'S USERID */
* /* If QWHCEUID truncated */
FLD: QWHCEND LEN(4) TYPE(BIN) DISP(148)
*
*
***********************************************************************
**** QWHCAID_D DSECT /* Use if QWHCAID_Off¬=0 */
***********************************************************************
COMP: QWHCAID_D_OFFSET =
WHEN(QWHC_OFFSET <> 99999 AND QWHCAID_Off <> 0)
ASSIGN(QWHC_OFFSET + QWHCAID_Off)
ELSE ASSIGN(99999)
FLD: QWHCAID_D DISP(0) LEN(1) OFFSET(QWHCAID_D_OFFSET)
/*Use if QWHCAID_Off¬ 0*/
FLD: QWHCAID_LEN TYPE(HALF) DISP(0) /*Lenght of the following field*/
FLD: QWHCAID_VAR LEN(128) DISP(2) /*%U AUTHORIZATION ID*/
*
*
***********************************************************************
**** QWHCOPID_D DSECT /* Use if QWHCOPID_Off¬=0 */
***********************************************************************
COMP: QWHCOPID_D_OFFSET =
WHEN(QWHC_OFFSET <> 99999 AND QWHCOPID_Off <> 0)
ASSIGN(QWHC_OFFSET + QWHCOPID_Off)
ELSE ASSIGN(99999)
FLD: QWHCOPID_D DISP(0) LEN(1) OFFSET(QWHCOPID_D_OFFSET)
/*Use if QWHCOPID_Off¬ 0*/
FLD: QWHCOPID_LEN TYPE(HALF) DISP(0) /*Lenght of the following field*/
FLD: QWHCOPID_VAR LEN(128) DISP(2)/*%U ORIGINAL OPERATOR ID*/
*
*
***********************************************************************
**** QWHCEUID_D DSECT /* Use if QWHCEUID_Off¬=0 */
***********************************************************************
COMP: QWHCEUID_D_OFFSET =
WHEN(QWHC_OFFSET <> 99999 AND QWHCEUID_Off <> 0)
ASSIGN(QWHC_OFFSET + QWHCEUID_Off)
ELSE ASSIGN(99999)
FLD: QWHCEUID_D DISP(0) LEN(1) OFFSET(QWHCEUID_D_OFFSET)
/*Use if QWHCEUID_Off¬ 0*/
FLD: QWHCEUID_LEN TYPE(HALF) DISP(0) /*Lenght of the following field*/
FLD: QWHCEUID_VAR LEN(128) DISP(2)/*THE END USER'S USERID AT THE*/
*
*/*****************************************************************/
*/* CONNECTION SYSTEM TYPE CONSTANTS */
*/*****************************************************************/
*
COMP: QWHCTSO = X'1' /*TSO FOREGROUND AND BACKGROUND*/
COMP: QWHCDB2C = X'2' /*DB2 CALL ATTACH*/
COMP: QWHCDLIB = X'3' /*DL/I BATCH*/
COMP: QWHCCICS = X'4' /*CICS ATTACH*/
COMP: QWHCIMSB = X'5' /*IMS ATTACH BMP*/
COMP: QWHCIMSM = X'6' /*IMS ATTACH MPP*/
COMP: QWHCDUW = X'7' /*DB2 PRIVATE PROTOCOL*/
COMP: QWHCRUW = X'8' /*DRDA PROTOCOL*/
COMP: QWHCICTL = X'9' /*IMS CONTROL REGION*/
COMP: QWHCTBMP = X'A' /*IMS TRANSACTION BMP*/
COMP: QWHCUTIL = X'B' /*DB2 UTILITIES*/
COMP: QWHCTRRS = X'C' /*RRSAF ATTACH*/
***********************************************************************
**** QWHD DSECT
***********************************************************************
COMP: QWHD_OFFSET =
WHEN(PSHDR_2_TYP = QWHSHD16) ASSIGN(PSHDR_2_OFFSET)
WHEN(PSHDR_3_TYP = QWHSHD16) ASSIGN(PSHDR_3_OFFSET)
WHEN(PSHDR_4_TYP = QWHSHD16) ASSIGN(PSHDR_4_OFFSET)
WHEN(PSHDR_5_TYP = QWHSHD16) ASSIGN(PSHDR_5_OFFSET)
WHEN(PSHDR_6_TYP = QWHSHD16) ASSIGN(PSHDR_6_OFFSET)
ELSE ASSIGN(99999)
FLD: QWHD DISP(0) LEN(1) OFFSET(QWHD_OFFSET)
*
*/********************************************************************/
*/* INSTRUMENTATION DISTRIBUTED DATA */
*/********************************************************************/
*
FLD: QWHDLEN LEN(2) TYPE(BIN) DISP(0)
/*LENGTH OF THE DISTRIBUTED HEADER*/
FLD: QWHDTYP LEN(1) DISP(2) /*TYPE OF HEADER DISTRIBUTED 16*/
FLD: QWHDRQNM LEN(16) DISP(4)
/*%U REQUESTER LOCATION NAME BLANK IF HEADER*/
* IS WRITTEN AT APPLICATION REQUESTER SITE
* THE NAME BY WHICH DB2 KNOWS THE APPLI-
* REQUESTER
* Truncated if QWHDRQNM_Off¬=0
FLD: QWHDTSTP LEN(8) DISP(20) /*TIMESTAMP FOR DBAT TRACE RECORDS*/
FLD: QWHDSVNM LEN(16) DISP(28)
/*%U SRVNAM PARAMETER OF DRDA EXCSAT COMMAND*/
* WHAT A DRDA REQUESTER CALLS ITSELF.
* FOR PRIVATE PROTOCOLS SAME AS QWHDRQNM.
* ZEROES IF HEADER IS WRITTEN AT
* APPLICATION REQUESTER SITE.
* Truncated if QWHDSVNM_Off¬=0
FLD: QWHDPRID LEN(8) DISP(44)
/*PRDID PARAMETER OF DRDA ACCRDB COMMAND*/
* PRODUCT ID OF APPLICATION REQUESTER.
* FOR PRIVATE PROTOCOLS THIS FIELD WILL
* BE SET TO AN APPROPRIATE PRODUCT ID VALUE
* ZEROES IF HEADER IS WRITTEN AT APPLICA-
* TION REQUESTER SITE.
FLD: QWHDRQNM_OFF TYPE(HALF) DISP(52) /*Offset from QWHD to*/
* REQUESTER LOCATION NAME
* If QWHDRQNM truncated
FLD: QWHDSVNM_OFF TYPE(HALF) DISP(54) /*Offset from QWHD*/
* SRVNAM PARAMETER OF DRDA EXCSAT COMMAND
* If QWHDSVNM truncated
FLD: QWHDEND LEN(4) TYPE(BIN) DISP(56)
*
*
*
***********************************************************************
**** QWHDRQNM_D DSECT Use if QWHDRQNM_Off¬=0
***********************************************************************
COMP: QWHDRQNM_D_OFFSET =
WHEN(QWHD_OFFSET <> 99999 AND QWHDRQNM_Off <> 0)
ASSIGN(QWHD_OFFSET + QWHDRQNM_Off)
ELSE ASSIGN(99999)
FLD: QWHDRQNM_D DISP(0) LEN(1) OFFSET(QWHDRQNM_D_OFFSET)
/*Use if QWHDRQNM_Off¬ 0*/
FLD: QWHDRQNM_LEN TYPE(HALF) DISP(0) /*Length of the following field*/
FLD: QWHDRQNM_VAR LEN(128) DISP(2)/*%U REQUESTER LOCATION NAME*/
*
*
*
***********************************************************************
**** QWHDSVNM_D DSECT Use if QWHDSVNM_Off¬=0
***********************************************************************
COMP: QWHDSVNM_D_OFFSET =
WHEN(QWHD_OFFSET <> 99999 AND QWHDSVNM_Off <> 0)
ASSIGN(QWHD_OFFSET + QWHDSVNM_Off)
ELSE ASSIGN(99999)
FLD: QWHDSVNM_D DISP(0) LEN(1) OFFSET(QWHDSVNM_D_OFFSET)
/*Use if QWHDSVNM_Off¬ 0*/
FLD: QWHDSVNM_LEN TYPE(HALF) DISP(0) /*Length of the following field*/
FLD: QWHDSVNM_VAR LEN(128) DISP(2)
/*%U SRVNAM PARAMETER OF DRDA EXCSAT COMMAND*/
***********************************************************************
**** QWAC DSECT
***********************************************************************
***********************************************************************
* TO REPORT ON ALL OCCURRENCES OF QWAC, USE:
* INPUT: SMF101
* NORMWHEN(SMF101_IFCID3 AND QWA01R1N > 0)
* NORMALIZE(QWAC, QWA01R1N)
***********************************************************************
COMP: QWAC_OFFSET =
WHEN(SMF101_IFCID3 AND QWA01R1N > 0) ASSIGN(QWA01R1O)
ELSE ASSIGN(99999)
FLD: QWAC DISP(0) LEN(528) OFFSET(QWAC_OFFSET)
*
*/********************************************************************/
*/* INSTRUMENTATION ACCOUNTING DATA FOR IFCID=0003 */
*/********************************************************************/
*/********************************************************************
* NOTE: The following fields have rollup data if QWACPARR is on in *
* QWACFLGS. A rollup record is written with accumulated *
* counter data for the following type of threads: *
* *
* - Query parallelism child tasks, if Zparm PTASKROL=YES *
* - DDF and RRSAF threads, is Zparm ACCUMACC is not < 2 *
* *
* Query parallelism child tasks: *
* A rollup record is written with accumulated counter data *
* when the parent task (agent) deallocates on an originating *
* DB2, or whn an accumulating child task deallocated on an *
* assisting DB2. The rollup data is an accumulation of all *
* the counters for that field for each child task that *
* completed and deallocated. *
* *
* DDF and RRSAF threads: *
* A rollup record is written with accumulated counter data for*
* an end user when the number of occurrences of the end user *
* on the thread reaches the Zparm value for ACCUMACC. End *
* user is defined as the concatenation of the following three *
* values: *
* - End user userid (QWHEUID, 16 bytes) *
* - End user transaction name (QWHCEUTX, 32 bytes) *
* - End user workstation name (QWHCEUWN, 18 bytes) *
* *
* *
* QWACCOMM QWACABRT QWACASC QWACAJST QWACAWTI QWACAWTL QWACARNE *
* QWACAWTR QWACAWTW QWACAWTE QWACARNL QWACARNR QWACARNW QWACARNS *
* QWACARLG QWACAWLG QWACAWTP QWACARNH QWACAWTG QWACAWTJ QWACARNG *
* QWACARNJ QWACLRN QWACSPTT QWACSPNE QWACCAST QWACCANM QWACUDCP *
* QWACUDTT QWACUDNE QWACUDST QWACUDEA QWACUDEB QWACTRTT QWACTRET *
* QWACPECT QWACPECD QWACSPEA QWACSPEB QWACSVPT QWACRLSV QWACRBSV *
* QWACAWTK QWACAWTM QWACAWTN QWACAWTO QWACAWTQ QWACARNK QWACARNM *
* QWACARNN QWACARNO QWACARNQ QWACLRAB QWACSPCP QWACTRTE QWACTREE *
* QWACCLS1_ZIIP QWACCLS2_ZIIP QWACTRTT_ZIIP QWACZIIP_ELIGIBLE *
* *
* Fields QWACESC and QWACEJST have the accumulated elapsed and CPU *
* times for all the child tasks or DDF/RRSAF end user occurrences *
* in the rollup record. This is a redefinition from the end times *
* for individual tasks. *
* *
* Additional valid fields in rollup QWACs: *
* *
* QWACFLGS QWACPKGN QWACPCNT QWACPACE QWACRINV QWACSUCV *
* *
* For DDF/RRSAF rollup records the following values are *
* derived from last thread to rollup: *
* *
* QWACWLME *
* *
* For DDF/RRSAF rollup records QWACBSC will represent *
* the earliest begin store clock value for a thread that *
* has rolled data into the record. *
* *
**********************************************************************/
*
*/********************************************************************
* NOTE: FIELDS DEFINED AS CHARACTER MAY CONTAIN HEX DATA
*
* NOTE - THE FOLLOWING TIMES INDICATE A LEVEL OF ACTIVITY FOR
* THE THREAD ADDRESS SPACE DURING THE PERIOD OF TIME THE
* AUTHORIZATION ID WAS ACTIVE BUT SHOULD BE USED WITH CAUTION
* FOR CHARGE BACK BECAUSE CPU AND ELAPSED TIMES ARE OBTAINED WHEN
* THE CREATE THREAD OR SIGNON REQUEST UNDER A THREAD IS SUCCESSFUL
* OR HAS BEEN TERMINATED. SINCE THESE REQUESTS PROBABLY WILL NOT
* OCCUR AT TRANSACTION/APPLICATION PROGRAM SCHEDULING OR TERMINATION
* THE TIMES MAY NOT ACCURATELY REPRESENT A USERS ACIVITY. AN
* EXCEPTION TO THE ABOVE STATEMENT IS FOR IMS APPLICATION PROGRAMS
* WHICH ALWAYS MAKE A SQL CALL IN THE BEGINNING OF THE PROGRAM AND
* ARE RUNNING AS MODE SINGLE TRANSACTIONS OR AS NON TRANSACTION
* DRIVEN BMPS. THEN THE TIMES RECORDED BELOW DO APPROXIMATE TIME
* ASSOCIATED WITH A SPECIFIC AUTHORIZATION ID. */
*
*/********************************************************************/
*
FLD: QWACBSC TYPE(STCKTIME) DISP(0) /*BEGINNING STORE CLOCK VALUE*/
FLD: QWACESC TYPE(STCKTIME) DISP(8) /*ENDING STORE CLOCK VALUE*/
*
*/********************************************************************
* WHEN A CICS APPLICATION PROGRAM CAUSES MORE THAN ONE SYNC POINT *
* COMMIT OR ROLLBACK TO OCCUR, THEN IT IS POSSIBLE TO HAVE MULTIPLE *
* ACCOUNTING RECORDS AND ACCOUNTING RECORDS OUT OF SEQUENCE FOR THE *
* APPLICATION IF CICS ATTACH THREAD SWAPPING OCCURS. *
**********************************************************************/
*
FLD: QWACBJST TYPE(STCKTIME) DISP(16)
/*Beginning CPU time for all environments*/
* /*(CICS, IMS, TSO, etc.). This CPU time */
* /*does not include CPU consumed on an IBM */
* /*ZIIP. */
*
*/********************************************************************
* QWACEJST VALUES MAY BE INVALID WHEN WHEN THE QWACRINV VALUE *
* EXCEEDS DECIMAL 20. *
* QWACEJST MAY BE ZERO WHEN QWACRINV IS EQUAL TO DECIMAL 20. *
* QWACEJST VALUES MAY BE INVALID FOR END OF MEMORY CONDITIONS. *
**********************************************************************/
*
FLD: QWACEJST TYPE(STCKTIME) DISP(24)
/*Ending CPU time for all environments*/
* /*(CICS, IMS, TSO, etc.). This CPU time */
* /*does not include CPU consumed on an IBM */
* /*ZIIP. */
FLD: QWACBSRB LEN(8) DISP(32) /*SRB times are no longer set by DB2.*/
FLD: QWACESRB LEN(8) DISP(40) /*SRB times are no longer set by DB2.*/
FLD: QWACRINV LEN(4) DISP(48)
/*REASON ACCOUNTING IS INVOKED SEE BELOW*/
FLD: QWACNID LEN(16) DISP(52) /*NETWORK ID VALUE FROM CCB*/
FLD: QWACCOMM LEN(4) TYPE(BIN) DISP(68)
/*NUMBER OF COMMIT PHASE 2 REQUESTS*/
FLD: QWACABRT LEN(4) TYPE(BIN) DISP(72) /*NUMBER OF ABORT REQUESTS*/
*
*/*********************************************************************
* THE FOLLOWING VALUES THROUGH QWACARNS ARE CALCULATED IF THE
* OPTIONAL ACCOUNTING CLASSES ARE STARTED
**********************************************************************/
*
FLD: QWAC1 LEN(4) TYPE(BIN) DISP(76)
*
*/*********************************************************************
* THE FOLLOWING VALUES ARE CALCULATED FOR THREADS BY TAKING THE
* STCK TIME, AND ASCB TCB TIMES ON ENTRY TO DB2 AND
* SUBTRACTING THE CORRESPONDING TIMES ON EXIT FROM DB2. THE MAJORITY
* OF THREAD ALLOCATION AND CERTAIN ABEND CONDITIONS ARE NOT INCLUDED.
* THE ELAPSED AND TCB TIMES WILL NOT BE EXACTLY THE SAME AS VALUES
* THAT MIGHT BE DERIVED FROM A SUMMATION OF DELTA VALUES BETWEEN
* IFCID 121 AND 122 COMBINATIONS, BECAUSE THE TIMES ARE NOT TAKEN
* AT EXACTLY THE SAME TIME.
**********************************************************************/
*
FLD: QWACASC TYPE(STCKTIME) DISP(76)
/*ACCUMULATED ELAPSED TIME IN DB2*/
FLD: QWACAJST TYPE(STCKTIME) DISP(84)
/*Accumulated CPU time consumed while*/
* /* executing in DB2. This CPU time does not */
* /* include CPU consumed on an IBM ZIIP. */
* /* In addition, this time does not */
* /* include CPU consumed while processing SQL */
* /* statements in a stored procedure. */
FLD: QWACASRB LEN(8) DISP(92) /*SRB times are no longer set by DB2*/
*
*/********************************************************************
* THE FOLLOWING TWO VALUES ARE CALCULATED FOR THREADS BY TAKING THE
* STCK TIME ON ENTRY TO EVENT WAIT AND SUBTRACTING STCK ON EXIT
* RESUME FROM THE EVENT.
**********************************************************************/
*
FLD: QWACAWTI TYPE(STCKTIME) DISP(100)
/*ACCUMULATED I/O ELAPSED WAIT TIME FOR*/
* database I/O done under this thread */
FLD: QWACAWTL TYPE(STCKTIME) DISP(108)
/*Accumulated wait time due to latch*/
* contention or to local contention for locks.
* The term "local contention" is used to
* differentiate from "global contention"
* (which is reported in QWACAWTJ). Local
* contention does not require inter-system
* communication - the contention is detected
* and resolved entirely within this
* subsystem. */
*
FLD: QWACARNA LEN(4) TYPE(BIN) DISP(116)
/*NUMBER OF DB2 ENTRY/EXIT EVENTS PROCESSED*/
* /* BY THE ALLIED ADDRESS SPACE. IT DOES NOT */
* /* INCLUDE SQL ENTRY/EXIT EVENTS PERFORMED BY */
* /* A STORED PROCEDURE. */
FLD: QWACARNE LEN(4) TYPE(BIN) DISP(120)
/*NUMBER OF WAIT TRACE EVENTS PROCESSED FOR*/
* /* WAITS FOR database I/O UNDER THIS THREAD */
*
*/*********************************************************************
* THE FOLLOWING THREE VALUES ARE CALCULATED FOR THREADS BY TAKING THE
* STCK TIME ON ENTRY TO EVENT WAIT AND SUBTRACTING STCK ON EXIT
* RESUME FROM THE EVENT.
**********************************************************************/
*
FLD: QWACAWTR TYPE(STCKTIME) DISP(124)
/*ACCUMULATED WAIT TIME FOR READ I/O THAT*/
* IS DONE UNDER A THREAD OTHER THAN THIS
* ONE. */
FLD: QWACAWTW TYPE(STCKTIME) DISP(132)
/*ACCUMULATED WAIT TIME FOR WRITE I/O THAT*/
* IS DONE UNDER A THREAD OTHER THAN THIS
* ONE. */
FLD: QWACAWTE TYPE(STCKTIME) DISP(140)
/*Accumulated wait time due to synchronous*/
* execution unit switch for DB2 commit,
* abort, or deallocation processing. For
* RRSAF threads, this value include
* explicit commit time (SRRCMIT calls).
* See QWACAWLG for implicit RRS commit
* time. */
FLD: QWACARNL LEN(4) TYPE(BIN) DISP(156)
/*NUMBER OF WAIT TRACE EVENTS PROCESSED FOR*/
* WAITS FOR LATCH OR LOCAL CONTENTION FOR
* LOCKS. */
FLD: QWACARNR LEN(4) TYPE(BIN) DISP(160)
/*NUMBER OF WAIT TRACE EVENTS PROCESSED FOR*/
* WAITS FOR READ I/O UNDER ANOTHER THREAD */
FLD: QWACARNW LEN(4) TYPE(BIN) DISP(164)
/*NUMBER OF WAIT TRACE EVENTS PROCESSED FOR*/
* WAITS FOR WRITE I/O UNDER ANOTHER THREAD */
FLD: QWACARNS LEN(4) TYPE(BIN) DISP(168)
/*NUMBER OF WAIT TRACE EVENTS PROCESSED FOR*/
* WAITS FOR SYNCHRONOUS EXECUTION UNIT
* SWITCHING for commit/abort. */
FLD: QWAC2 LEN(4) TYPE(BIN) DISP(176)
*
FLD: QWACARLG LEN(4) TYPE(BIN) DISP(176)
/*Number of wait trace events processed*/
* /* for waits for log write I/O */
FLD: QWACAWLG TYPE(STCKTIME) DISP(180)
/*Accumulated wait time for a log write*/
* /* I/O. For RRSAF threads, this value */
* /* includes implicit commit time for RRS */
* /* at EOT if uncommitted work exists. */
* /* See QWACAWTE for explicit RRS */
* /* commit time. */
FLD: QWACAWTP TYPE(STCKTIME) DISP(212)
/*Accumulated wait time due to page latch*/
* /* contention */
FLD: QWACARNH LEN(4) TYPE(BIN) DISP(220)
/*Number of wait trace events processed*/
* /* for page latch contention */
*
*/*********************************************************************
* THE FOLLOWING VALUES THROUGH QWACPKGN ARE DEPENDENT ON THE
* ACTIVATION OF OPTIONAL ACCOUNTING CLASSES.
* QWACCLS2 WILL BE ON ONLY IF ACCOUNTING CLASS 2 WAS ACTIVE DURING
* THE LIFE OF THE AGENT WHEN A CLASS 2 EVENT OCCURRED.
* QWACCLS3 WILL BE ON ONLY IF ACCOUNTING CLASS 3 WAS ACTIVE DURING
* THE LIFE OF THE AGENT WHEN A CLASS 3 EVENT OCCURRED.
* QWACPKGN WILL BE NON-ZERO ONLY IF ACCOUNTING CLASS 7 AND/OR 8
* WERE ACTIVE WHEN THE AGENT BEGAN EXECUTION OF A PACKAGE OR
* OR DBRM.
**********************************************************************/
*
FLD: QWAC3 LEN(4) TYPE(BIN) DISP(224)
*
FLD: QWACFLGS LEN(2) DISP(224) /*FLAGS*/
*
*/********************************************************************/
*/* BIT MEANINGS FOR QWACFLGS */
*/********************************************************************/
COMP: QWACCLS2 = X'0001' /*THERE IS NON ZERO ACCOUNTING*/
COMP: QWACCLS3 = X'0002' /*THERE IS NON ZERO ACCOUNTING*/
COMP: QWACCL2O = X'0004' /*Class 2 accounting data*/
COMP: QWACCL3O = X'0008' /*Class 3 accounting data*/
COMP: QWACCL7O = X'0010' /*Class 7 accounting data*/
COMP: QWACCL8O = X'0020' /*Class 8 accounting data*/
COMP: QWACPARR = X'0040' /*There is rollup data for*/
FLD: QWACPKGN TYPE(HALF) DISP(226)/*NUMBER OF PACKAGES/DBRMs FOR*/
* WHICH THE APPROPRIATE TRACES
* WERE ACTIVE AND THEREFORE,
* PACKAGE/DBRM LEVEL ACCOUNTING
* WAS PERFORMED. THIS IS THE
* NUMBER OF QPAC SECTIONS TO BE
* WRITTEN FOR THIS AGENT IN IFCID
* 239 (10 PER RECORD).
*/*********************************************************************
* The following values through QWACARNJ are calculated if
* Accounting Class 3 is started and if DB2 is a member of a DB2
* data sharing group.
**********************************************************************/
*
FLD: QWACA261 LEN(4) TYPE(BIN) DISP(228)
FLD: QWACAWTG TYPE(STCKTIME) DISP(228)
/*Accumulated wait time due to sending of*/
* messages to other DB2 members in the
* data sharing group. */
FLD: QWACAWTJ TYPE(STCKTIME) DISP(236)
/*Accumulated wait time due to global*/
* contention for parent L-locks. Global
* contention occurs when inter-system
* communication is required to resolve an
* IRLM Lock or Change request. QPACAWTL
* contains the wait time due to local
* contention. Local contention does not
* require inter-system communciation - it
* can be resolved by the local subsystem. */
FLD: QWACARNG LEN(4) TYPE(BIN) DISP(244)
/*Number of wait trace events processed*/
* for sending of messages to other members
* in the data sharing group. */
FLD: QWACARNJ LEN(4) TYPE(BIN) DISP(248)
/*Number of wait trace events processed*/
* for waits for global lock contention for
* parent L-locks. */
*/*********************************************************************
* THE FOLLOWING VALUES ARE FOR STORED PROCEDURES.
* QWACSPCP IS CALCULATED ONLY IF CLASS 1 IS ACTIVE.
* QWACSPTT, QWACSPNE ARE CALCULATED ONLY IF CLASS 2 IS ACTIVE.
* QWACCANM, QWACCAST ARE CALCULATED ONLY IF CLASS 3 IS ACTIVE.
**********************************************************************/
FLD: QWACB302 LEN(1)
FLD: QWACSPCP LEN(8) DISP(252) /*The accumulated TCB time used to*/
* /* satisfy stored procedure requests */
* /* processed in a DB2 stored procedure/WLM */
* /* address space */
*
FLD: QWACA302 LEN(1)
FLD: QWACSPTT LEN(8) DISP(260)
/*the accumulated TCB time consumed in DB2*/
* /* processing SQL statements issued by */
* /* stored procedure(s) and included in */
* /* QWACSPCP. This time also includes */
* /* in DB2 time needed to connect and */
* /* disconnect the SP task. */
FLD: QWACSPNE LEN(4) TYPE(BIN) DISP(268)
/*the number of SQL entry/exit events*/
* /* performed by stored procedures */
FLD: QWACCAST TYPE(STCKTIME) DISP(272)
/*the total elapsed time spent waiting*/
* /* for an available TCB, before the */
* /* stored procedure could be scheduled. */
FLD: QWACCANM LEN(4) TYPE(BIN) DISP(280)
/*the number of times an SQL CALL*/
* /* statement had to wait for an available */
* /* TCB, before the stored procedure could */
* /* be scheduled. */
*/*********************************************************************
* THE FOLLOWING VALUES ARE FOR IFC ROLLUP RECORDS AND
* UTILITY SUBTASKS.
* QWACPCNT, QWACPACE ARE CALCULATED ONLY IF CLASS 1 IS ACTIVE.
**********************************************************************/
FLD: QWACA282 LEN(4) TYPE(BIN) DISP(284)
FLD: QWACPCNT LEN(4) TYPE(BIN) DISP(284)
/*Number of parallel/subtasks created.*/
* /* For parallel/subtasks, this value is 0. */
* /* Additionally, for DDF/RRSAF rollup */
* /* records, this is the number of */
* /* accounting intervals rolled up in */
* /* this record for the corresponding */
* /* 'end user' */
FLD: QWACPACE LEN(4) TYPE(BIN) DISP(288)
/*Correlating token for parallel/subtasks.*/
* /* For parallel/subtasks, this value is = */
* /* to the QWHSACE of the originating/main */
* /* task. For non-parallel/non-subtask */
* /* tasks, this value is 0. */
* /* This field has no meaning in DDF/RRSAF */
* /* rollup records */
FLD: QWACSUCV TYPE(FULL) DISP(292)
/*THIS FIELD CONTAINS THE SU CONV FACTOR.*/
* /* THIS VALUE IS USEFUL FOR ACCOUNTING */
* /* MONITORS THAT ATTEMPT TO ROLL UP CPU */
* /* EXECUTION TIMES ACROSS MULTIPLE DB2S */
* /* RUNNING ON DIFFERENT MACHINES. WITHOUT */
* /* THIS CONVERSION FACTOR, CPU TIMES */
* /* CANNOT BE NORMALIZED AND SUMMED. */
FLD: QWACWLME LEN(8) DISP(296)
/*The MVS Workload Manager Service Class*/
* /* Name if the thread is a DBAT and if the */
* /* MVS release and system definitions */
* /* invoke this function. Otherwise binary */
* /* zeroes. For DDF/RRSAF rollup records, */
* /* this value will be derived from the last*/
* /* thread to rollup data into the record. */
*/*******************************************************************
* Log Values for task
* amount of logging for a thread may exceed UR only related logging
* because of system related actions needed by the thread.
********************************************************************/
FLD: QWACLRN LEN(4) TYPE(BIN) DISP(304) /*log records written*/
FLD: QWACLRAB LEN(6) DISP(310) /*bytes logged*/
FLD: QWACLRA2 LEN(2) DISP(310) /*Hi order 2 bytes*/
FLD: QWACLRA4 LEN(4) DISP(312) /*Lo order 4 bytes*/
*/*********************************************************************
* THE FOLLOWING VALUES ARE FOR USER DEFINED FUNCTIONS.
* QWACUDCP AND QWACUDEA ARE CALCULATED ONLY IF CLASS 1 IS ACTIVE.
* QWACUDTT, QWACUDNE, AND QWACUDEB ARE CALCULATED ONLY IF CLASS
* 2 IS ACTIVE.
* QWACUDST IS CALCULATED ONLY IF CLASS 3 IS ACTIVE.
**********************************************************************/
FLD: QWACB303 LEN(1)
FLD: QWACUDCP LEN(8) DISP(316) /*The accumulated TCB time used to*/
* /* satisfy user-defined function requests. */
FLD: QWACA303 LEN(1)
FLD: QWACUDTT LEN(8) DISP(324)
/*the accumulated TCB time consumed in DB2*/
* /* processing SQL statements issued by */
* /* user-defined function(s) and included */
* /* in QWACUDCP. This time also includes */
* /* in DB2 time needed to connect and */
* /* disconnect the UDF task. */
FLD: QWACUDNE LEN(4) TYPE(BIN) DISP(332)
/*the number of SQL entry/exit events*/
* /* performed by user-defined functions */
FLD: QWACUDST TYPE(STCKTIME) DISP(336)
/*the total elapsed time spent waiting*/
* /* for an available TCB, before the */
* /* user-defined function could be scheduled*/
FLD: QWACUDEA TYPE(STCKTIME) DISP(344)
/*The total elapsed time spent in user*/
* /* defined functions, including time */
* /* executing SQL */
FLD: QWACUDEB TYPE(STCKTIME) DISP(352)
/*The total elapsed time spent for user*/
* /* defined functions executing SQL. This */
* /* time also includes in DB2 time needed to*/
* /* connect and disconnect the UDF task. */
*********************************************************************/
* The following values are for TRIGGERS. */
* QWACTRTT, QWACTRET, QWACTRTE, QWACTREE, and QWACPECD */
* are calculated only if class 1 is active. */
*********************************************************************/
FLD: QWACB304 LEN(1)
FLD: QWACTRTT TYPE(STCKTIME) DISP(360)
/*The accumulated CPU time consumed while*/
* /* executing triggers on the main */
* /* application execution unit. This time */
* /* does not include CPU consumed on an IBM */
* /* ZIIP. */
FLD: QWACTRET TYPE(STCKTIME) DISP(368)
/*The accumulated elapsed time expended*/
* /* executing triggers on the main */
* /* application execution unit. */
FLD: QWACPECT LEN(8) DISP(376)
/*The accumulated TCB time consumed prior*/
* /* to enclave creation time. */
FLD: QWACPECD LEN(8) DISP(384) /*reserved*/
FLD: QWACSPEA TYPE(STCKTIME) DISP(392)
/*The total elapsed time spent in stored*/
* /* procedures, including time executing SQL*/
FLD: QWACSPEB TYPE(STCKTIME) DISP(400)
/*The total elapsed time spent for stored*/
* /* procedures executing SQL. This time also*/
* /* includes in DB2 time needed to connect */
* /* and disconnect the SP task. */
FLD: QWACTRTE TYPE(STCKTIME) DISP(408)
/*The accumulated CPU time consumed while*/
* /* executing triggers on a nested task. */
FLD: QWACTREE TYPE(STCKTIME) DISP(416)
/*The accumulated elapsed time expended*/
* /* executing triggers on a nested task. */
*********************************************************************/
* The following values are for External Savepoint requests */
* QWACSVPT, QWACRLSV, and QWACRBSV */
*********************************************************************/
FLD: QWACESVP LEN(1)
FLD: QWACSVPT LEN(4) TYPE(BIN) DISP(424)
/*the number of savepoint requests*/
FLD: QWACRLSV LEN(4) TYPE(BIN) DISP(428)
/*the number of release svpt requests*/
FLD: QWACRBSV LEN(4) TYPE(BIN) DISP(432)
/*the number of rollback to svpt requests*/
*********************************************************************/
* Additional counters for global wait times. These counters */
* break out values that were previously all contained in */
* QWACAWTJ and QWACARNJ. */
*********************************************************************/
FLD: QWAC2AW LEN(1)
FLD: QWACAWTK TYPE(STCKTIME) DISP(436)
/*Accumulated wait time due to global*/
* contention for child L-locks */
FLD: QWACAWTM TYPE(STCKTIME) DISP(444)
/*Accumulated wait time due to global*/
* contention for other L-locks */
FLD: QWACAWTN TYPE(STCKTIME) DISP(452)
/*Accumulated wait time due to global*/
* contention for pageset/partition P-locks*/
FLD: QWACAWTO TYPE(STCKTIME) DISP(460)
/*Accumulated wait time due to global*/
* contention for page P-locks */
FLD: QWACAWTQ TYPE(STCKTIME) DISP(468)
/*Accumulated wait time due to global*/
* contention for other P-locks */
FLD: QWACARNK LEN(4) TYPE(BIN) DISP(476)
/*Number of wait trace events processed*/
* for waits for global contention for
* child L-locks */
FLD: QWACARNM LEN(4) TYPE(BIN) DISP(480)
/*Number of wait trace events processed*/
* for waits for global contention for
* other L-locks */
FLD: QWACARNN LEN(4) TYPE(BIN) DISP(484)
/*Number of wait trace events processed*/
* for waits for global contention for
* pageset/partition P-locks */
FLD: QWACARNO LEN(4) TYPE(BIN) DISP(488)
/*Number of wait trace events processed*/
* for waits for global contention for
* page P-locks */
FLD: QWACARNQ LEN(4) TYPE(BIN) DISP(492)
/*Number of wait trace events processed*/
* for waits for global contention for
* other P-locks */
FLD: QWACZIIP LEN(1)
FLD: QWACCLS1_ZIIP TYPE(STCKTIME) DISP(496)
/*Accumulated CPU time consumed while*/
* /* executing on an IBM ZIIP in */
* /* all environments. */
FLD: QWACCLS2_ZIIP TYPE(STCKTIME) DISP(504)
/*Accumulated CPU time consumed while*/
* /* executing in DB2 on an IBM ZIIP. */
FLD: QWACTRTT_ZIIP TYPE(STCKTIME) DISP(512)
/*Accumulated CPU time consumed executing*/
* /* triggers on the main application */
* /* execution unit on an IBM ZIIP. */
FLD: QWACZIIP_ELIGIBLE LEN(8) DISP(520)
/*Accumulated CPU executed on a standard*/
* /* CP for ZIIP-eligible work. */
FLD: QWACEND LEN(1) DISP(528)
*
*/********************************************************************/
*/*THE FOLLOWING VALUES DESCRIBE WHY ACCOUNTING WAS INVOKED- QWACRINV*/
*/********************************************************************/
*/* DCR-DJ012 ADDED ACC,STG,STL,IN2 *jbt 8/02 */
COMP: QWACRACC = X'00000001' /*ACCUMULATING DATA BY END USER FOR DDF*/
COMP: QWACRSTG = X'00000002' /*ACCUMULATING DATA BY END USER FOR DDF*/
COMP: QWACRSTL = X'00000003' /*ACCUMULATING DATA BY END USER FOR DDF*/
COMP: QWACRIFI = X'00000004' /*IFI READS REQUEST FOR IFCID 147 OR*/
COMP: QWACRSUS = X'00000006' /*SAME USER RESIGN ON WITH SAME AUTHID*/
COMP: QWACRNUS = X'00000008' /*NEW USER THE AUTHORIZATION ID*/
COMP: QWACRINA = X'0000000A' /*DDF THREAD IS BECOMING INACTIVE*/
COMP: QWACRIN2 = X'0000000B' /*DDF TYPE 2 INACT IS BECOMING INACTIVE*/
COMP: QWACRDEA = X'0000000C' /*DEALLOCATION NORMAL PROGRAM*/
COMP: QWACRAAC = X'0000000E' /*COMMIT RRSAF THREAD SPECIFIED*/
COMP: QWACEOTN = X'00000010' /*END OF TASK APPLICATION PROGRAM*/
COMP: QWACEOTA = X'00000014' /*END OF TASK APPLICATION PROGRAM*/
COMP: QWACEOMA = X'00000018' /*END OF MEMORY ABNORMAL TERMINATION*/
COMP: QWACRESI = X'0000001C' /*RESOLVE INDOUBT ABNORMAL*/
COMP: QWACCANF = X'00000020' /*CANCEL FORCE STOP FORCE COMMAND*/
COMP: QWACETIN = X'00000028' /*END OF TASK APPLICATION PROGRAM*/
COMP: QWACETIA = X'0000002C' /*END OF TASK APPLICATION PROGRAM*/
COMP: QWACEMIA = X'00000030' /*END OF MEMORY ABNORMAL TERMINATION*/
COMP: QWACCNFI = X'00000038' /*CANCEL FORCE STOP FORCE COMMAND*/
***********************************************************************
**** DSNDQXST DSECT TABLE OF SQL STMT COUNTERS
***********************************************************************
***********************************************************************
* TO REPORT ON ALL OCCURRENCES OF DSNDQXST, USE:
* INPUT: SMF101
* NORMWHEN(SMF101_IFCID3 AND QWA01R2N > 0)
* NORMALIZE(QXST, QWA01R2N)
***********************************************************************
COMP: QXST_OFFSET =
WHEN(SMF101_IFCID3 AND QWA01R2N > 0) ASSIGN(QWA01R2O)
ELSE ASSIGN(99999)
FLD: DSNDQXST DISP(0) LEN(460) OFFSET(QXST_OFFSET)
/*TABLE OF SQL STMT COUNTERS*/
FLD: QXST LEN(8) DISP(0) /*RDS ACCOUNTING AREA*/
FLD: QXHEAD LEN(4) TYPE(BIN) DISP(0) /*CONTROL BLOCK HEADER*/
FLD: QXID TYPE(HALF) DISP(0) /*CONTROL BLOCK ID*/
FLD: QXLEN TYPE(HALF) DISP(2) /*CONTROL BLOCK LENGTH*/
FLD: QXEYE LEN(4) DISP(4) /*CONTROL BLOCK EYE CATCHER*/
FLD: STMT LEN(4) TYPE(BIN) DISP(8) /*OVERLAY ON QXSTATS*/
FLD: QXSTATS LEN(4) TYPE(BIN) DISP(8) /*ACCOUNTING STATISTICS*/
FLD: QXSELECT LEN(4) TYPE(BIN) DISP(8) /*# OF SELECTS*/
FLD: QXINSRT LEN(4) TYPE(BIN) DISP(12) /*# OF INSERTS*/
FLD: QXUPDTE LEN(4) TYPE(BIN) DISP(16) /*# OF UPDATES*/
FLD: QXDELET LEN(4) TYPE(BIN) DISP(20) /*# OF DELETES*/
FLD: QXDESC LEN(4) TYPE(BIN) DISP(24) /*# OF DESCRIBES*/
FLD: QXPREP LEN(4) TYPE(BIN) DISP(28) /*# OF PREPARES*/
FLD: QXOPEN LEN(4) TYPE(BIN) DISP(32) /*# OF OPENS*/
FLD: QXCLOSE LEN(4) TYPE(BIN) DISP(36) /*# OF CLOSES*/
FLD: QXCRTAB LEN(4) TYPE(BIN) DISP(40) /*# OF CREATE TABLE*/
FLD: QXCRINX LEN(4) TYPE(BIN) DISP(44) /*# OF CREATE INDEX*/
FLD: QXCTABS LEN(4) TYPE(BIN) DISP(48) /*# OF CREATE TABLESPACE*/
FLD: QXCRSYN LEN(4) TYPE(BIN) DISP(52) /*# OF CREATE SYNONYM*/
FLD: QXCRDAB LEN(4) TYPE(BIN) DISP(56) /*# OF CREATE DATABASE*/
FLD: QXCRSTG LEN(4) TYPE(BIN) DISP(60) /*# OF CREATE STORAGE GROUP*/
FLD: QXDEFVU LEN(4) TYPE(BIN) DISP(64) /*# OF CREATE VIEW*/
FLD: QXDRPIX LEN(4) TYPE(BIN) DISP(68) /*# OF DROP INDEX*/
FLD: QXDRPTA LEN(4) TYPE(BIN) DISP(72) /*# OF DROP TABLE*/
FLD: QXDRPTS LEN(4) TYPE(BIN) DISP(76) /*# OF DROP TABLESPACE*/
FLD: QXDRPDB LEN(4) TYPE(BIN) DISP(80) /*# OF DROP DATABASE*/
FLD: QXDRPSY LEN(4) TYPE(BIN) DISP(84) /*# OF DROP SYNONYM*/
FLD: QXDRPST LEN(4) TYPE(BIN) DISP(88) /*# OF DROP STORAGE GROUP*/
FLD: QXDRPVU LEN(4) TYPE(BIN) DISP(92) /*# OF DROP VIEW*/
FLD: QXALTST LEN(4) TYPE(BIN) DISP(96) /*# OF ALTER STORAGE GROUP*/
FLD: QXFETCH LEN(4) TYPE(BIN) DISP(100) /*# OF FETCHS*/
FLD: QXALTTS LEN(4) TYPE(BIN) DISP(104) /*# OF ALTER TABLESPACE*/
FLD: QXALTTA LEN(4) TYPE(BIN) DISP(108) /*# OF ALTER TABLE*/
FLD: QXALTIX LEN(4) TYPE(BIN) DISP(112) /*# OF ALTER INDEX*/
FLD: QXCMTON LEN(4) TYPE(BIN) DISP(116) /*# OF COMMENT ON*/
FLD: QXLOCK LEN(4) TYPE(BIN) DISP(120) /*# OF LOCK TABLE*/
FLD: QXGRANT LEN(4) TYPE(BIN) DISP(124) /*# OF GRANT*/
FLD: QXREVOK LEN(4) TYPE(BIN) DISP(128) /*# OF REVOKE*/
FLD: QXINCRB LEN(4) TYPE(BIN) DISP(132)
/*# OF INCREMENTAL BINDS EXCLUDING PREPARES*/
FLD: QXLABON LEN(4) TYPE(BIN) DISP(136) /*# OF LABEL ON*/
FLD: QXSETSQL LEN(4) TYPE(BIN) DISP(140) /*# OF Set Current SQLID 1*/
FLD: QXCRALS LEN(4) TYPE(BIN) DISP(144) /*# OF CREATE ALIAS 2*/
FLD: QXDRPAL LEN(4) TYPE(BIN) DISP(148) /*# OF DROP ALIAS 2*/
FLD: QXMIAP LEN(4) TYPE(BIN) DISP(152)
/*# of times RID list processing used. This 9*/
* field is incremented once for a given 9
* table access for Index Access with list 9
* prefetch and for Multiple Index Access. 9
FLD: QXNSMIAP LEN(4) TYPE(BIN) DISP(156)
/*# of times a RID list was not used for 9*/
* a given RID list process involving one 9
* index (Index Access with list prefetch) 9
* or involving multiple indexes (Multiple 9
* Index Access) because no storage was 9
* available to hold the list of RIDs. 9
FLD: QXMRMIAP LEN(4) TYPE(BIN) DISP(160)
/*# of times one or more RID lists were not 9*/
* used for a given RID list process involving
* one indx (Index Access with list prefetch)9
* or involving multiple indexes (Multiple 9
* Index Access) because the number of RIDs 9
* exceeded one or more internal limits. 9
FLD: QXSETHV LEN(4) TYPE(BIN) DISP(164)
/*# OF Set Host Variable statements, we 6*/
* don't trace the contents of the special 6
* register. 6
FLD: QXALDAB LEN(4) TYPE(BIN) DISP(168) /*# OF ALTER DATABASE 7*/
FLD: QXDRPPKG LEN(4) TYPE(BIN) DISP(172)
/*# OF DROP PACKAGE STATEMENTS 8*/
FLD: QXDSCRTB LEN(4) TYPE(BIN) DISP(176)
/*# OF DESCRIBE TABLE STATEMENTS 8*/
FLD: QXMAXDEG LEN(4) TYPE(BIN) DISP(180)
/*Maximum degree of parallelism among the A*/
* parallel groups to indicate the extent to A
* which query parallelism applies. A
FLD: QXTOTGRP LEN(4) TYPE(BIN) DISP(184)
/*Total number of parallel groups executed A*/
FLD: QXDEGCUR LEN(4) TYPE(BIN) DISP(188)
/*Total number pf parallel groups which A*/
* fell back to sequential mode because the A
* cursor may be used in UPDATE/DELETE. A
FLD: QXDEGESA LEN(4) TYPE(BIN) DISP(192)
/*Total number of parallel groups which fellA*/
* back to sequential mode due to lack of A
* ESA sort support. A
FLD: QXDEGBUF LEN(4) TYPE(BIN) DISP(196)
/*Total number of parallel groups that have C*/
* a planned degree greater than one at run C
* time, but fell back to sequential mode C
* because of storage shortage or contention C
* on the buffer pool. C
FLD: QXREDGRP LEN(4) TYPE(BIN) DISP(200)
/*Total number of parallel groups that have C*/
* a planned degree greater than one at run C
* time, but were processed to a parallel C
* degree less than planned because of a C
* storage shortage or contention on the C
* buffer pool. C
FLD: QXNORGRP LEN(4) TYPE(BIN) DISP(204)
/*Total number of parallel groups that have C*/
* a planned degree greater than one at run C
* time, and were executed to the same degreeC
* because of sufficient storage on the C
* buffer pool. C
FLD: QXCON1 LEN(4) TYPE(BIN) DISP(208)
/*# of CONNECT type 1 statements executed B*/
FLD: QXCON2 LEN(4) TYPE(BIN) DISP(212)
/*# of CONNECT type 2 statements executed B*/
FLD: QXREL LEN(4) TYPE(BIN) DISP(216)
/*# of RELEASE statements executed B*/
FLD: QXSETCON LEN(4) TYPE(BIN) DISP(220)
/*# of SET CONNECTION statements executed B*/
FLD: QXSETCDG LEN(4) TYPE(BIN) DISP(224)
/*# of SET CURRENT DEGREE statements A*/
* executed
FLD: QXSETCRL LEN(4) TYPE(BIN) DISP(228)
/*# of SET CURRENT RULES statements D*/
FLD: QXCALL LEN(4) TYPE(BIN) DISP(232)
/*# of SQL CALL statements executed F*/
FLD: QXCALLAB LEN(4) TYPE(BIN) DISP(236)
/*# of times a stored procedure ABENDed F*/
FLD: QXCALLTO LEN(4) TYPE(BIN) DISP(240)
/*# of times an SQL CALL statement timed F*/
* out waiting to be scheduled F
FLD: QXCALLRJ LEN(4) TYPE(BIN) DISP(244)
/*# of times an SQL CALL statement was F*/
* rejected F
FLD: QXDEGENC LEN(4) TYPE(BIN) DISP(248)
/*Total number of parallel groups executed G*/
* in sequential mode due to the unavailable G
* enclave G
FLD: QXRLFDPA LEN(1) DISP(252)
/*If non zero, then Query Parallelism J*/
* is disabled by the RLF for at least one I
* dynamic SELECT statement in this thread. I
* See IFCID 0022 from a PREPARE statement I
* for detailed information at the statement I
* level. This field is for accounting I
* IFCID 0003 and does not apply to IFCID I
* 0002. I
FLD: QXCOORNO LEN(4) TYPE(BIN) DISP(256)
/*Total number of parallel groups executed K*/
* on a single DB2 due to the COORDINATOR K
* subsystem parameter being set to NO. K
* When the statement was bound, the K
* COORDINATOR subsystem parameter was K
* set to YES. This situation can also K
* occur when a plan or package is bound on K
* one DB2 where COORDINATOR=YES but is run K
* on a DB2 where COORDINATOR=NO. K
FLD: QXISORR LEN(4) TYPE(BIN) DISP(260)
/*Total number of parallel groups executed K*/
* on a single DB2 due to repeatable-read K
* or read-stability isolation. K
FLD: QXCRGTT LEN(4) TYPE(BIN) DISP(264)
/*# OF CREATE GLOBAL TEMPORARY TABLE M*/
FLD: QXSTREOP LEN(4) TYPE(BIN) DISP(268)
/*Total number of times reoptimization N*/
* occurs. This field does not apply to N
* IFCID 0002. N
FLD: QXXCBPNX LEN(4) TYPE(BIN) DISP(272)
/*Total number of parallel groups that were O*/
* intended to run across the data sharing O
* group. This count is only incremented on O
* the parallelism coordinator at run time. O
FLD: QXXCSKIP LEN(4) TYPE(BIN) DISP(276)
/*The number of times that the parallelism O*/
* coordinator had to bypass a DB2 when O
* distributing tasks because there was not O
* enough buffer pool storage on one or more O
* DB2 members. This field is incremented O
* only on the parallelism coordinator, and O
* it is only incremented once per parallel O
* group, even though it is possible that O
* more than one DB2 had a buffer pool O
* shortage for that parallel group. O
* The purpose of this count is to indicate O
* when there are not enough buffers on a O
* member. Therefore, this count is O
* incremented only when the buffer pool is O
* defined to allow parallelism. For O
* example, if VPXPSEQT = 0 on an assistant, O
* DB2 does not send parallel work there, butO
* this count is not incremented. O
FLD: QXALOCL LEN(4) TYPE(BIN) DISP(280)
/*Number of ASSOCIATE LOCATOR statements P*/
* executed P
FLD: QXALOCC LEN(4) TYPE(BIN) DISP(284)
/*Number of ALLOCATE CURSOR statements P*/
* statements executed P
FLD: QXSTFND LEN(4) TYPE(BIN) DISP(288)
/*The number of times a PREPARE request P*/
* was satisfied by making a copy from the P
* prepared statement cache P
FLD: QXSTNFND LEN(4) TYPE(BIN) DISP(292)
/*The number of times a PREPARE request P*/
* was received but a matching statement was P
* not found in the prepared statement P
* cache. Cache search is only done for P
* DML SQL and only if cache option is activeP
FLD: QXSTIPRP LEN(4) TYPE(BIN) DISP(296)
/*The number of times that an implicit P*/
* prepare was performed because the P
* KEEPDYNAMIC(YES) option was used and an P
* OPEN, EXECUTE or DESCRIBE of a dynamic P
* statement occurred after a COMMIT but P
* DB2 no longer had a valid copy of the P
* executable version of the prepared P
* statement P
FLD: QXSTNPRP LEN(4) TYPE(BIN) DISP(300)
/*The number of times that a prepare was P*/
* avoided because KEEPDYNAMIC(YES) was P
* used along with prepared statement P
* caching and DB2 still had the application P
* process' copy of the executable version P
* of the prepared statement P
FLD: QXSTDEXP LEN(4) TYPE(BIN) DISP(304)
/*The number of times that an application P*/
* process' executable copy of a prepared P
* statement was discarded due to the P
* MAXKEEPD system limit being exceeded P
FLD: QXSTDINV LEN(4) TYPE(BIN) DISP(308)
/*The number of times that a prepared P*/
* statement was purged from the cache P
* because a DROP, ALTER, or REVOKE P
* statement was issued on a dependent P
* object. P
FLD: QXRNTAB LEN(4) TYPE(BIN) DISP(312) /*# OF RENAME TABLE Q*/
FLD: QXCTRIG LEN(4) TYPE(BIN) DISP(316) /*# OF CREATE TRIGGER R*/
FLD: QXDRPTR LEN(4) TYPE(BIN) DISP(320) /*# OF DROP TRIGGER R*/
FLD: QXSETPTH LEN(4) TYPE(BIN) DISP(324)
/*# OF SET CURRENT PATH statements S*/
FLD: QXDRPFN LEN(4) TYPE(BIN) DISP(328)
/*# OF DROP USER DEFINED FUNCTION T*/
FLD: QXDRPPR LEN(4) TYPE(BIN) DISP(332) /*# OF DROP PROCEDURE T*/
FLD: QXCDIST LEN(4) TYPE(BIN) DISP(336)
/*# OF CREATE DISTINCT TYPE statements U*/
FLD: QXDDIST LEN(4) TYPE(BIN) DISP(340)
/*# OF DROP DISTINCT TYPE statements U*/
FLD: QXCRUDF LEN(4) TYPE(BIN) DISP(344)
/*# OF CREATE FUNCTION statements V*/
FLD: QXCRPRO LEN(4) TYPE(BIN) DISP(348)
/*# OF CREATE PROCEDURE statements c*/
FLD: QXHOLDL LEN(4) TYPE(BIN) DISP(352)
/*# OF HOLD LOCATOR statements W*/
FLD: QXFREEL LEN(4) TYPE(BIN) DISP(356)
/*# OF FREE LOCATOR statements W*/
FLD: QXREPOP1 LEN(4) TYPE(BIN) DISP(360)
/*Total number of parallel groups for which X*/
* DB2 reformulated the parallel portion of X
* the access path because the sysplex X
* configuration was different from the X
* sysplex configuration at bind time. X
* This counter is only incremented by the X
* parallelism coordinator at run time. X
FLD: QXREPOP2 LEN(4) TYPE(BIN) DISP(364)
/*Total number of parallel groups for which X*/
* DB2 reformulated the paralllel portion of X
* the access path because there was not X
* enough buffer pool resource. X
* This counter is only incremented by the X
* parallelism coordinator at run time. X
FLD: QXCRATB LEN(4) TYPE(BIN) DISP(368)
/*# OF CREATE AUX TABLE statements c*/
FLD: QXSTLOBV LEN(4) TYPE(BIN) DISP(372)
/*Max storage used for LOB values Y*/
* In KB for accounting, in MB for statisticsY
FLD: QXALUDF LEN(4) TYPE(BIN) DISP(376)
/*# OF ALTER FUNCTION statements Z*/
FLD: QXALPRO LEN(4) TYPE(BIN) DISP(380)
/*# OF ALTER PROCEDURE statements Z*/
FLD: QXROIMAT LEN(4) TYPE(BIN) DISP(384)
/*# of times that direct row access was a*/
* successful
FLD: QXROIIDX LEN(4) TYPE(BIN) DISP(388)
/*# of times an attempt to use direct row a*/
* access reverted to using an index to a
* locate a record
FLD: QXROITS LEN(4) TYPE(BIN) DISP(392)
/*# of times an attempt to use direct row a*/
* access reverted to using a table space a
* scan to locate a record
FLD: QXSTTRG LEN(4) TYPE(BIN) DISP(396)
/*# of times a statement trigger was b*/
* activated b
FLD: QXROWTRG LEN(4) TYPE(BIN) DISP(400)
/*# of times a row trigger was activated b*/
FLD: QXTRGERR LEN(4) TYPE(BIN) DISP(404)
/*# of times an SQL error occurred during b*/
* execution of a triggered action b
FLD: QXCASCDP LEN(4) TYPE(BIN) DISP(408)
/*The maximum level of nested SQL b*/
* cascading. This includes cascading b
* due to triggers, UDFs and stored b
* procedures. b
FLD: QXCAUD LEN(4) TYPE(BIN) DISP(412)
/*# of user defined functions executed d*/
FLD: QXCAUDAB LEN(4) TYPE(BIN) DISP(416) /*# of times a UDF ABENDed d*/
FLD: QXCAUDTO LEN(4) TYPE(BIN) DISP(420)
/*# of times a UDF timed out waiting to d*/
* be scheduled d
FLD: QXCAUDRJ LEN(4) TYPE(BIN) DISP(424)
/*# of times a UDF was rejected d*/
FLD: QXSETCPR LEN(4) TYPE(BIN) DISP(428)
/*# SET CURRENT PRECISION statements e*/
* executed e
FLD: QXDCLGTT LEN(4) TYPE(BIN) DISP(432)
/*# of DECLARE GLOBAL TEMPORARY TABLE stmts f*/
FLD: QXDEGDTT LEN(4) TYPE(BIN) DISP(436)
/*Total number of parallel groups that are f*/
* part of a query block using a UDF and f
* executed on a single DB2 due to f
* the existence of a Declared Temporary f
* Table in the application process. Neither f
* the query block nor the parallel group f
* references a Declared Temporary Table, andf
* a parallel group may or may not use a UDF.f
FLD: QXCRESEQ LEN(4) TYPE(BIN) DISP(440) /*# OF CREATE SEQUENCES*/
FLD: QXALTSEQ LEN(4) TYPE(BIN) DISP(444) /*# OF ALTER SEQUENCES*/
FLD: QXDROSEQ LEN(4) TYPE(BIN) DISP(448) /*# OF DROP SEQUENCES*/
FLD: QXPRRESI LEN(4) TYPE(BIN) DISP(452)
/*# of PREPAREs for which use of an i*/
* index/indexes were restricted because the i
* index was in a pending state. i
FLD: QXALTVW LEN(4) TYPE(BIN) DISP(456) /*# of ALTER VIEW j*/
FLD: QXSTEND LEN(4) TYPE(BIN) DISP(460) /*END OF RDS ACCOUNTING AREA*/
***********************************************************************
**** DSNDQBAC DSECT
***********************************************************************
***********************************************************************
* TO REPORT ON ALL OCCURRENCES OF DSNDQBAC, USE:
* INPUT: SMF101
* NORMWHEN((SMF101_IFCID3 OR SMF101_IFCID239) AND QWA01R3N > 0)
* NORMALIZE(QBAC, QWA01R3N)
***********************************************************************
COMP: QBAC_OFFSET =
WHEN(SMF101_IFCID3 AND QWA01R3N > 0) ASSIGN(QWA01R3O)
WHEN(SMF101_IFCID239 AND QWA11R3N > 0) ASSIGN(QWA11R3O)
ELSE ASSIGN(99999)
FLD: DSNDQBAC DISP(0) LEN(64) OFFSET(QBAC_OFFSET)
FLD: QBAC LEN(8) DISP(0)
FLD: QBACPID LEN(4) TYPE(BIN) DISP(0) /*BUFFER POOL ID*/
FLD: QBACGET LEN(4) TYPE(BIN) DISP(4)
/*# OF GET PAGE REQUESTS ISSUED. THIS*/
* INCLUDES CONDITIONAL AND NON-CONDITIONAL,
* SUCCESSFUL AND UNSUCCESSFUL REQUESTS.
FLD: QBACSWS LEN(4) TYPE(BIN) DISP(8)
/*# OF SETW ISSUED FOR SYSTEM PAGES*/
FLD: QBACRIO LEN(4) TYPE(BIN) DISP(16) /*# OF SYNCHRONOUS READ I/O*/
FLD: QBACSEQ LEN(4) TYPE(BIN) DISP(20) /*# OF SEQ PREFETCH REQUESTED*/
FLD: QBACIMW LEN(4) TYPE(BIN) DISP(24)
/*# OF IMMEDIATE (SYNCHRONOUS) WRITE I/O*/
FLD: QBACLPF LEN(4) TYPE(BIN) DISP(28)
/*# OF LIST PREFETCH REQUESTED*/
FLD: QBACDPF LEN(4) TYPE(BIN) DISP(32)
/*# OF DYNAMIC PREFETCH REQUESTED*/
FLD: QBACNGT LEN(4) TYPE(BIN) DISP(52)
/*# OF UNSUCCESSFUL GET PAGE OPERATIONS*/
* DUE TO CONDITIONAL GET PAGE REQUESTS
FLD: QBACSIO LEN(4) TYPE(BIN) DISP(56)
/*# OF ASYNCHRONOUS PAGES READ BY PREFETCH*/
* UNDER THE CONTROL OF THE AGENT
FLD: QBACEND LEN(4) TYPE(BIN) DISP(64)
***********************************************************************
**** QLAC DSECT
***********************************************************************
***********************************************************************
* TO REPORT ON ALL OCCURRENCES OF QLAC, USE:
* INPUT: SMF101
* NORMWHEN(SMF101_IFCID3 AND QWA01R5N > 0)
* NORMALIZE(QLAC, QWA01R5N)
***********************************************************************
COMP: QLAC_OFFSET =
WHEN(SMF101_IFCID3 AND QWA01R5N > 0) ASSIGN(QWA01R5O)
ELSE ASSIGN(99999)
FLD: QLAC DISP(0) LEN(230) OFFSET(QLAC_OFFSET)
FLD: QLACLOCN LEN(16) DISP(0) /*%U LOCATION NAME OF THE 'REMOTE'*/
* ..SITE WITH WHICH THE
* ...INFORMATION IS ASSOCIATED.
FLD: QLACSQLS LEN(4) TYPE(BIN) DISP(16)
/*NUMBER OF SQL STATEMENTS SENT*/
* ..TO THE SERVER.
* ..(MEANINGFUL AT APPLICATION
* ...REQUESTER (AR) SITE ONLY)
FLD: QLACSQLR LEN(4) TYPE(BIN) DISP(20) /*NUMBER OF SQL STATEMENTS*/
* ..RECEIVED FROM THE REQUESTER.
* ..(MEANINGFUL AT APPLICATION SERVER (AS)
* ...SITE ONLY)
FLD: QLACROWS LEN(4) TYPE(BIN) DISP(24)
/*NUMBER OF ROWS OF DATA SENT TO*/
* ..THE REQUESTER (INCLUDES THE SQLDA)
* ..(MEANINGFUL AT AS SITE ONLY)
FLD: QLACROWR LEN(4) TYPE(BIN) DISP(28) /*NUMBER OF ROWS OF DATA*/
* ..RETRIEVED FROM THE SERVER (THIS
* ...COUNT DOES NOT INCLUDE
* ....EITHER THE SQLDA OR SQLCA
* .....IF THEY ARE TRANSMITTED).
* ..(MEANINGFUL AT AR SITE ONLY)
FLD: QLACBYTS LEN(4) TYPE(BIN) DISP(32)
/*NUMBER OF BYTES OF DATA SENT*/
* ..TO THE SITE.
* ..(MEANINGFUL AT AS AND AR SITES)
FLD: QLACBYTR LEN(4) TYPE(BIN) DISP(36) /*NUMBER OF BYTES OF DATA*/
* ..RECEIVED FROM THE SITE.
* ..(MEANINGFUL AT AS AND AR SITES)
FLD: QLACCNVS LEN(4) TYPE(BIN) DISP(40)
/*NUMBER OF CONVERSATIONS THAT*/
* ..WERE INITIATED FROM THIS
* ...SITE TO THE REMOTE SITE
* ..(MEANINGFUL AT AR SITE ONLY)
FLD: QLACCNVR LEN(4) TYPE(BIN) DISP(44)
/*NUMBER OF CONVERSATIONS THAT*/
* ..WERE INITIATED FROM THE
* ...REMOTE SITE TO THIS SITE
* ..(MEANINGFUL AT AS SITE ONLY)
FLD: QLACMSGS LEN(4) TYPE(BIN) DISP(48) /*NUMBER OF MESSAGES SENT TO*/
* ..THE SITE.
* ..(MEANINGFUL AT AS AND AR SITES)
FLD: QLACMSGR LEN(4) TYPE(BIN) DISP(52) /*NUMBER OF MESSAGES RECEIVED*/
* ..FROM THE SITE.
* ..(MEANINGFUL AT AS AND AR SITES)
FLD: QLACTRNS LEN(4) TYPE(BIN) DISP(56)
/*NUMBER OF DATABASE ACCESS THREAD ALLOCATION*/
* ..REQUESTS SENT TO THE SITE
* ..(MEANINGFUL AT AR ONLY).
FLD: QLACTRNR LEN(4) TYPE(BIN) DISP(60)
/*NUMBER OF DATABASE ACCESS THREAD ALLOCATION*/
* ..REQUESTS RECEIVED FROM THE SITE
* ..(MEANINGFUL AT AS ONLY).
FLD: QLACCOMS LEN(4) TYPE(BIN) DISP(64)
/*NUMBER OF COMMIT REQUESTS SENT*/
* ..TO THE SERVER
* (SINGLE PHASE COMMIT PROTOCOL ONLY).
* ..(MEANINGFUL AT AR ONLY).
FLD: QLACCOMR LEN(4) TYPE(BIN) DISP(68) /*NUMBER OF COMMIT REQUESTS*/
* ..RECEIVED FROM THE REQUESTER
* (SINGLE PHASE COMMIT PROTOCOL ONLY).
* ..(MEANINGFUL AT AS ONLY).
FLD: QLACABRS LEN(4) TYPE(BIN) DISP(72)
/*NUMBER OF ABORT REQUESTS SENT*/
* ..TO THE SERVER
* (SINGLE PHASE COMMIT PROTOCOL ONLY).
* ..(MEANINGFUL AT AR ONLY).
FLD: QLACABRR LEN(4) TYPE(BIN) DISP(76) /*NUMBER OF ABORT REQUESTS*/
* ..RECEIVED FROM THE REQUESTER
* (SINGLE PHASE COMMIT PROTOCOL ONLY).
* ..(MEANINGFUL AT AS ONLY).
FLD: QLACCNVQ LEN(4) TYPE(BIN) DISP(80)
/*NUMBER OF CONVERSATION REQUESTS*/
* ..QUEUED BY DDF WAITING FOR
* ...ALLOCATION
* ..(MEANINGFUL AT AR ONLY).
FLD: QLACCPUL TYPE(STCKTIME) DISP(84)
/*ELAPSED TIME AT THE LOCAL SITE*/
* ..SPENT PROCESSING FOR THE
* ...REMOTE SITE. ACCOUNTING ONLY
* ..(MEANINGFUL AT AS AND AR SITES)
FLD: QLACCPUR TYPE(STCKTIME) DISP(92)
/*ELAPSED DATA BASE ACCESS AGENT*/
* ..TIME AT THE REMOTE SITE.
* ...ACCOUNTING ONLY.
* ...NOT SUPPORTED FOR APPLICATION DIRECTED
* ...ACCESS
* ...MAY BE MISLEADING IF BOTH
* ...SYSTEM DIRECTED ACCESS AND
* ...APPLICATION DIRECTED ACCESS USED
* ..(MEANINGFUL AT AR ONLY).
FLD: QLACDBAT TYPE(STCKTIME) DISP(100)
/*DATA BASE ACCESS AGENT CPU TIME*/
* ..AT THE REMOTE SITE
* ...ACCOUNTING ONLY.
* ...SHOULD NOT BE USED FOR CHARGE BACK
* ...MOST VTAM TIME NOT INCLUDED
* ...NOT SUPPORTED FOR APPLICATION DIRECTED
* ...ACCESS
* ...MAY BE MISLEADING IF BOTH
* ...SYSTEM DIRECTED ACCESS AND
* ...APPLICATION DIRECTED ACCESS USED
* ..(MEANINGFUL AT AR ONLY).
FLD: QLACCBLB LEN(4) TYPE(BIN) DISP(108)
/*NUMBER OF TIMES A SWITCH WAS MADE FROM*/
* ..CONTINUOUS BLOCK MODE TO LIMITED
* ...BLOCK MODE (SYSTEM DIRECTED ACCESS
* ....ONLY).
* ..(MEANINGFUL AT AR ONLY).
FLD: QLACRBND LEN(4) TYPE(BIN) DISP(112)
/*NUMBER OF SQL STATEMENTS THAT WERE BOUND*/
* ..FOR REMOTE ACCESS (SYSTEM DIRECTED
* ...ACCESS ONLY).
* ..(MEANINGFUL AT AR ONLY).
FLD: QLACBROW LEN(4) TYPE(BIN) DISP(116)
/*NUMBER OF ROWS IN THE MESSAGE BUFFER IF*/
* ..BLOCK FETCH IS BEING USED.
* ..(MEANINGFUL AT AS AND AR SITES)
FLD: QLACBTBF LEN(4) TYPE(BIN) DISP(120)
/*NUMBER OF BLOCKS TRANSMITTED USING BLOCK*/
* ..FETCH.
* ..(MEANINGFUL AT AS ONLY).
FLD: QLACBRBF LEN(4) TYPE(BIN) DISP(124)
/*NUMBER OF BLOCKS RECEIVED USING BLOCK*/
* ..FETCH.
* ..(MEANINGFUL AT AR ONLY).
FLD: QLACCNVA LEN(4) TYPE(BIN) DISP(128) /*NUMBER OF SUCCESSFUL*/
* ..CONVERSATIONS ALLOCATED
* ..(MEANINGFUL AT AR ONLY).
FLD: QLACCNVT LEN(4) TYPE(BIN) DISP(132)
/*NUMBER OF CONVERSATIONS DEALLOCATED*/
* ..(MEANINGFUL AT AR ONLY).
FLD: QLACCIEL LEN(4) TYPE(BIN) DISP(136)
/*LARGEST (QLACCNVA QLACCNVT)*/
* ..CALCULATED WHEN QLACCNVA
* ...IS INCREMENTED
* ..(MEANINGFUL AT AR ONLY).
FLD: QLACFLGS LEN(1) DISP(140) /*FLAG BYTE*/
COMP: QLACFLG0 = X'80' /*(S)*/
COMP: QLACFLG1 = X'40' /*ON IF SYSTEM DIRECTED ACCESS USED*/
COMP: QLACFLG2 = X'20' /*ON IF APPLICATION DIRECTED ACCESS USED*/
COMP: QLACFLG3 = X'10' /*(S)*/
COMP: QLACFLG4 = X'08' /*(S)*/
COMP: QLACFLG5 = X'04' /*(S)*/
COMP: QLACFLG6 = X'02' /*(S)*/
COMP: QLACFLG7 = X'01' /*(S)*/
FLD: QLACPRSE LEN(4) TYPE(BIN) DISP(144)
/*THE NUMBER OF PREPARE REQUESTS SENT TO*/
* THE PARTICIPANT
* (TWO PHASE COMMIT PROTOCOL ONLY).
FLD: QLACPRRC LEN(4) TYPE(BIN) DISP(148)
/*THE NUMBER OF PREPARE REQUESTS RECEIVED FROM*/
* THE COORDINATOR
* (TWO PHASE COMMIT PROTOCOL ONLY).
FLD: QLACLASE LEN(4) TYPE(BIN) DISP(152)
/*THE NUMBER OF LAST AGENT REQUESTS SENT TO*/
* THE COORDINATOR
* (TWO PHASE COMMIT PROTOCOL ONLY).
FLD: QLACLARC LEN(4) TYPE(BIN) DISP(156)
/*THE NUMBER OF LAST AGENT REQUESTS RECEIVED FROM*/
* THE INITIATOR
* (TWO PHASE COMMIT PROTOCOL ONLY).
FLD: QLACCRSE LEN(4) TYPE(BIN) DISP(160)
/*THE NUMBER OF COMMIT REQUESTS SENT TO*/
* THE PARTICIPANT
* (TWO PHASE COMMIT PROTOCOL ONLY).
FLD: QLACCRRC LEN(4) TYPE(BIN) DISP(164)
/*THE NUMBER OF COMMIT REQUESTS RECEIVED FROM*/
* THE COORDINATOR
* (TWO PHASE COMMIT PROTOCOL ONLY).
FLD: QLACBKSE LEN(4) TYPE(BIN) DISP(168)
/*THE NUMBER OF BACKOUT REQUESTS SENT TO*/
* THE PARTICIPANT
* (TWO PHASE COMMIT PROTOCOL ONLY).
FLD: QLACBKRC LEN(4) TYPE(BIN) DISP(172)
/*THE NUMBER OF BACKOUT REQUESTS RECEIVED FROM*/
* THE COORDINATOR
* (TWO PHASE COMMIT PROTOCOL ONLY).
FLD: QLACRRSE LEN(4) TYPE(BIN) DISP(176)
/*THE NUMBER OF FORGET RESPONSES SENT TO*/
* THE COORDINATOR
* (TWO PHASE COMMIT PROTOCOL ONLY).
FLD: QLACRRRC LEN(4) TYPE(BIN) DISP(180)
/*THE NUMBER OF FORGET RESPONSES RECEIVED FROM*/
* THE PARTICIPANT
* (TWO PHASE COMMIT PROTOCOL ONLY).
FLD: QLACVYSE LEN(4) TYPE(BIN) DISP(184)
/*THE NUMBER OF REQUEST COMMIT RESPONSES SENT TO*/
* THE COORDINATOR
* (TWO PHASE COMMIT PROTOCOL ONLY).
FLD: QLACVYRC LEN(4) TYPE(BIN) DISP(188)
/*THE NUMBER OF REQUEST COMMIT RESPONSES RECEIVED*/
* FROM THE PARTICIPANT
* (TWO PHASE COMMIT PROTOCOL ONLY).
FLD: QLACVNSE LEN(4) TYPE(BIN) DISP(192)
/*THE NUMBER OF BACKOUT RESPONSES SENT TO*/
* THE COORDINATOR
* (TWO PHASE COMMIT PROTOCOL ONLY).
FLD: QLACVNRC LEN(4) TYPE(BIN) DISP(196)
/*THE NUMBER OF BACKOUT RESPONSES RECEIVED FROM*/
* FROM THE PARTICIPANT
* (TWO PHASE COMMIT PROTOCOL ONLY).
FLD: QLACINDT LEN(4) TYPE(BIN) DISP(200)
/*THE NUMBER OF THREADS THAT WENT INDOUBT WITH*/
* THE REMOTE LOCATION AS THE COORDINATOR.
FLD: QLACCPTR LEN(4) TYPE(BIN) DISP(204)
/*THE NUMBER OF COMMIT OPERATIONS PERFORMED WITH*/
* THE REMOTE LOCATION AS THE COORDINATOR.
FLD: QLACRBTR LEN(4) TYPE(BIN) DISP(208)
/*THE NUMBER OF ROLLBACK OPERATIONS PERFORMED*/
* WITH THE REMOTE LOCATION AS THE COORDINATOR.
FLD: QLACPRID LEN(8) DISP(212) /*THE PRDID OF THE REMOTE LOCATION.*/
FLD: QLACMDWT TYPE(STCKTIME) DISP(220) /*TOTAL ELAPSED TIME SPENT*/
* WAITING FOR AN AVAILABLE
* DATABASE ACCESS AGENT.
FLD: QLACLOCN_OFF TYPE(HALF) DISP(228) /*OFFSET FROM QLAC TO*/
* LOCATION NAME OF THE 'REMOTE'
* SITE WITH WHICH THE
* INFORMATION IS ASSOCIATED
* IF QLACLOCN TRUNCATED.
FLD: QLACEND LEN(4) TYPE(BIN) DISP(232)
*
*
***********************************************************************
**** QLACLOCN_D DSECT USE IF QLACLOCN_Off,=0
***********************************************************************
COMP: QLACLOCN_D_OFFSET =
WHEN(QLAC_OFFSET<>99999 AND QLACLOCN_OFF<>0)
ASSIGN(QLAC_OFFSET + QLACLOCN_OFF)
ELSE ASSIGN(99999)
FLD: QLACLOCN_D DISP(0) LEN(1) OFFSET(QLACLOCN_D_OFFSET)
/*USE IF QLACLOCN_Off, 0*/
FLD: QLACLOCN_LEN TYPE(HALF) DISP(0) /*LENGTH OF THE FOLLOWING FIELD*/
FLD: QLACLOCN_VAR LEN(128) DISP(2)/*%U LOCATION NAME OF THE 'REMOTE'*/
* SITE WITH WHICH THE
* INFORMATION IS ASSOCIATED.
* TRUNCATED OF QLACLOCN_Off¬=0
***********************************************************************
**** QMDA DSECT
***********************************************************************
***********************************************************************
* TO REPORT ON ALL OCCURRENCES OF QMDA, USE:
* INPUT: SMF101
* NORMWHEN(SMF101_IFCID3AND QWA01R6N > 0)
* NORMALIZE(QMDA, QWA01R6N)
***********************************************************************
COMP: QMDA_OFFSET =
WHEN(SMF101_IFCID3 AND QWA01R6N > 0) ASSIGN(QWA01R6O)
ELSE ASSIGN(99999)
FLD: QMDA DISP(0) LEN(48) OFFSET(QMDA_OFFSET)
FLD: QMDAASLN LEN(1) TYPE(BIN) DISP(0) /*the number of bytes used in*/
* /* field QMDAAINF. This will */
* /* always be the length of */
* /* QMDAPRID + the number of */
* /* bytes actually used in field*/
* /* QMDAASTR. */
FLD: QMDAAINF LEN(255) DISP(1) /*Account Information*/
FLD: QMDAPRID LEN(8) DISP(1) /*the PRODUCT ID value. This*/
* /* identifies which product */
* /* generated the accounting */
* /* string. Binary zeroes */
* /* means no accounting string */
* /* is present. */
FLD: QMDAPTYP LEN(3) DISP(1) /*Product Name*/
* /* DSN-DB2 for z/OS. */
* /* ARI-DB2 for VM&VSE. */
* /* SQL-DB2 for Linux, Unix, */
* /* Windows. */
* /* JCC-DB2 Universal JDBC */
* /* Driver. */
* /* QSQ-DB2 for i/Series. */
FLD: QMDAPVER LEN(2) DISP(4) /*Product Version*/
FLD: QMDAPREL LEN(2) DISP(6) /*Product Release*/
FLD: QMDAPMOD LEN(1) DISP(8) /*Product Modification Level*/
FLD: QMDAASTR LEN(247) DISP(9) /*The accounting string for*/
* /* the agent. For LOCAL DB2 */
* /* threads, the format of the */
* /* accounting string is shown */
* /* in QMDAINFO. For DBAAs */
* /* (distributed server agents),*/
* /* the accounting string will */
* /* contain whatever the SQL */
* /* requesting system sent for */
* /* an accounting string. The */
* /* QMDAPRID value identifies */
* /* which product produced the */
* /* accounting string. */
* /* If QMDAPTYP is DSN, then */
* /* QMDAINFO defines the format.*/
* /* If QMDAPTYP is SQL, then */
* /* QMDASQLI defines the format.*/
* /* If QMDAPTYP is JCC, then */
* /* QMDASQLI defines the format.*/
* /* If QMDAPTYP is neither DSN */
* /* nor SQL, then the format */
* /* is undefined. */
* /* QMDAASTR is a 247 byte field*/
* /* but the number of bytes */
* /* actually used to present the*/
* /* accounting string is vari- */
* /* able. The number of bytes */
* /* used to present the account-*/
* /* string = QMDAASLN - OFFSET( */
* /* QMDAASTR) + 1. */
FLD: QMDALOCN_OFF TYPE(HALF) DISP(256) /*Offset from QMDA to*/
* /* The DB2 LOCATION name for */
* /* the DB2 system that created */
* /* the QMDAINFO values if */
* /* QMDALOCN is truncated */
* /* This field is ONLY valid */
* /* if QMDAINFO maps QMDAASTR */
FLD: QMDAEND LEN(1) DISP(258)
*
*
***********************************************************************
**** QMDAINFO DSECT
***********************************************************************
COMP: QMDAINFO_OFFSET =
WHEN(SMF101_IFCID3 AND QWA01R6N > 0) ASSIGN(QWA01R6O + 9)
ELSE ASSIGN(99999)
FLD: QMDAINFO DISP(0) LEN(1) OFFSET(QMDAINFO_OFFSET)
FLD: QMDALOCN LEN(16) DISP(0) /*%U The DB2 LOCATION name for*/
* /* the DB2 system that created */
* /* the QMDAINFO values. */
FLD: QMDANETN LEN(8) DISP(16) /*The SNA NETID of*/
* /* the DB2 system that created */
* /* the QMDAINFO values. */
FLD: QMDALUNM LEN(8) DISP(24) /*The SNA LU name of*/
* /* the DB2 system that created */
* /* the QMDAINFO values. */
FLD: QMDACNAM LEN(8) DISP(32) /*The DB2 Connection Name at*/
* /* the DB2 system where the */
* /* SQL application is running. */
FLD: QMDACTYP LEN(8) DISP(40) /*The DB2 Connection Type at*/
* /* the DB2 system where the */
* /* SQL application is running. */
FLD: QMDACORR LEN(12) DISP(48) /*The DB2 Correlation ID at*/
* /* the DB2 system where the */
* /* SQL application is running. */
FLD: QMDAAUTH LEN(8) DISP(60) /*The DB2 AUTHID that the SQL*/
* /* application used, prior to */
* /* name translation and prior */
* /* to driving the connection */
* /* exit at the DB2 site where */
* /* the SQL application is */
* /* running. */
FLD: QMDAPLAN LEN(8) DISP(68) /*The DB2 PLAN that the SQL*/
* /* application used at the DB2 */
* /* site running the SQL pgm. */
FLD: QMDAACCT LEN(1) DISP(76) /*The MVS accounting string*/
* /* associated with the DB2 SQL */
* /* application's MVS address */
* /* space. */
* /* */
* /* MVS allows multiple fields */
* /* to be supplied in the */
* /* accounting string. In the */
* /* example below, there are */
* /* three MVS accounting fields.*/
* /* */
* /* STEP1 EXEC PGM=X, */
* /* ACCT=(X,Y,Z) */
* /* */
* /* When multiple MVS accounting*/
* /* fields are present, DB2 uses*/
* /* a 'FF'X value to delimit the*/
* /* fields. In the previous */
* /* example, DB2 will produce a */
* /* 5 byte accounting string */
* /* "XdYdZ", where the "d" */
* /* character represents the */
* /* 'FF'X accounting field */
* /* delimiter. */
*
***********************************************************************
**** QMDASQLI DSECT
***********************************************************************
COMP: QMDASQLI_OFFSET =
WHEN(SMF101_IFCID3 AND QWA01R6N > 0) ASSIGN(QWA01R6O + 9)
ELSE ASSIGN(99999)
FLD: QMDASQLI DISP(0) LEN(1) OFFSET(QMDASQLI_OFFSET)
FLD: QMDAPLAT LEN(18) DISP(0) /*Client Platform*/
* /* 1 to 18 characters, padded */
* /* with blanks */
* /* Example values are: "OS/2", */
* /* "AIX", "DOS", "DOS/Windows" */
*
FLD: QMDAAPPL LEN(20) DISP(18) /*Client Application Name*/
* /* 1 to 20 characters, padded */
* /* with blanks */
* /* Example: "PAYROLL" */
*
FLD: QMDAATID LEN(8) DISP(38) /*Client Authid*/
* /* 1 to 8 characters, padded */
* /* with blanks */
* /* This is the Authid of an */
* /* application process. */
* /* Example: "SMITH" */
*
FLD: QMDASFLN LEN(1) DISP(46) /*Account Suffix Length.*/
FLD: QMDASUFX LEN(1) DISP(47) /*Account Suffix.*/
* /* The maximum length of this */
* /* field is 200 bytes. */
* /* This environment variable */
* /* is the user-supplied */
* /* portion (suffix) of the */
* /* accounting string. */
* /* Example: "DEFAULT_DRDA" */
* /* A value of zero in QMDASFLN */
* /* indicates there is no */
* /* Account Suffix. */
*
*
***********************************************************************
**** QMDALOCN_D DSECT Use if QMDALOCN_Off,=0
***********************************************************************
COMP: QMDALOCN_D_OFFSET =
WHEN(QMDA_OFFSET<>99999 AND QMDALOCN_OFF<>0)
ASSIGN(QMDA_OFFSET + QMDALOCN_OFF)
ELSE ASSIGN(99999)
FLD: QMDALOCN_D DISP(0) LEN(1) OFFSET(QMDALOCN_D_OFFSET)
/*Use if QMDALOCN_Off, 0*/
FLD: QMDALOCN_LEN TYPE(HALF) DISP(0) /*Length of the following field*/
FLD: QMDALOCN_VAR LEN(128) DISP(2)/*%U The DB2 LOCATION name for*/
* the DB2 system that created
* the QMDAINFO values if
* QMDALOCN is truncated
***********************************************************************
**** QIFA DSECT
***********************************************************************
***********************************************************************
* TO REPORT ON ALL OCCURRENCES OF QIFA, USE:
* INPUT: SMF101
* NORMWHEN(SMF101_IFCID3 AND QWA01R7N > 0)
* NORMALIZE(QIFA, QWA01R7N)
***********************************************************************
COMP: QIFA_OFFSET =
WHEN(SMF101_IFCID3 AND QWA01R7N > 0) ASSIGN(QWA01R7O)
ELSE ASSIGN(99999)
FLD: QIFA DISP(0) LEN(64) OFFSET(QIFA_OFFSET)
*
*********************************************************************
** IFI ACCOUNTING DATA FOR IFCID=0003 *
*********************************************************************
*********************************************************************
**NOTE: FIELDS DEFINED AS CHARACTER MAY CONTAIN HEX DATA *
** *
** NOTE - THE FOLLOWING TIMES INDICATE A LEVEL OF ACTIVITY FOR *
** THE THREAD ADDRESS SPACE DURING THE PERIOD OF TIME THE *
** AUTHORIZATION ID WAS ACTIVE BUT SHOULD BE USED WITH CAUTION *
** FOR CHARGE BACK *
*********************************************************************
*
FLD: QIFAAIET TYPE(STCKTIME) DISP(0) /*ACCUMULATED ELAPSED TIME SPENT*/
* PROCESSING IFI CALLS - ONLY IF
* ACCOUNTING CLASS 5 ACTIVE
FLD: QIFAAITT TYPE(STCKTIME) DISP(8) /*ACCUMULATED TCB CPU TIME SPENT*/
* PROCESSING IFI CALLS - ONLY IF
* ACCOUNTING CLASS 5 ACTIVE
FLD: QIFAAMBT TYPE(STCKTIME) DISP(16)
/*ACCUMULATED ELAPSED TIME SPENT*/
* PROCESSING DATA CAPTURE DESCRIBES
* THIS IS A SUBSET OF THE TIME
* PROVIDED IN QIFAAMLT
FLD: QIFAAMLT TYPE(STCKTIME) DISP(24)
/*ACCUMULATED ELAPSED TIME SPENT*/
* EXTRACTING LOG RECORDS FOR TABLES
* DEFINED WITH 'DATA CAPTURE CHANGES'
* THIS IS A SUBSET OF THE TIME
* PROVIDED IN QIFAAIET
FLD: QIFAANIF LEN(4) TYPE(BIN) DISP(32)
/*NUMBER OF ENTRY/EXIT TO IFI EVENTS*/
* ONLY IF ACCOUNTING CLASS 5 ACTIVE
FLD: QIFAANLR LEN(4) TYPE(BIN) DISP(36)
/*NUMBER OF DATA CAPTURE LOG READS*/
* PERFORMED
FLD: QIFAANRC LEN(4) TYPE(BIN) DISP(40)
/*NUMBER OF LOG RECORDS CAPTURED FOR*/
* WHICH DATA CAPTURE PROCESSING WAS
* INVOKED
FLD: QIFAANRR LEN(4) TYPE(BIN) DISP(44)
/*NUMBER OF DATA CAPTURE LOG RECORDS*/
* RETURNED TO CALLER AS A RESULT OF IFI
* READS REQUESTS FOR IFCID 185
FLD: QIFAANDR LEN(4) TYPE(BIN) DISP(48)
/*NUMBER OF DATA CAPTURE DATA ROWS*/
* RETURNED. TWO ROWS ARE RETURNED FOR
* EACH ROW ALTERED BY AN SQL UPDATE
* STATEMENT. DATA CAPTURE DATA ROWS ARE
* RETURNED IN IFCID 185 AND ARE MAPPED BY
* BY QW0185DR
FLD: QIFAANDD LEN(4) TYPE(BIN) DISP(52)
/*NUMBER OF DATA CAPTURE DATA DESCRIPTIONS*/
* RETURNED. DATA CAPTURE DATA DESCRIPTIONS
* ARE MAPPED IN IFCID 185 BEGINNING
* WITH FIELD QW0185DD
FLD: QIFAANMB LEN(4) TYPE(BIN) DISP(56)
/*NUMBER OF DATA CAPTURE DESCRIBES*/
* PERFORMED
FLD: QIFAANTB LEN(4) TYPE(BIN) DISP(60)
/*NUMBER OF DATA CAPTURE TABLES FOR WHICH*/
* DATA CAPTURE DESCRIPTIONS WERE RETURNED
FLD: QIFAEND LEN(1) DISP(64)
*
***********************************************************************
**** QBGA DSECT
***********************************************************************
***********************************************************************
* TO REPORT ON ALL OCCURRENCES OF QBGA, USE:
* INPUT: SMF101
* NORMWHEN(SMF101_IFCID3 AND QWA01R9N > 0)
* NORMALIZE(QBGA, QWA01R9N)
***********************************************************************
COMP: QBGA_OFFSET =
WHEN(SMF101_IFCID3 AND QWA01R9N > 0) ASSIGN(QWA01R9O)
ELSE ASSIGN(99999)
FLD: QBGA DISP(0) LEN(92) OFFSET(QBGA_OFFSET)
FLD: QBGAGN LEN(4) TYPE(BIN) DISP(0) /*Group Buffer Pool id*/
FLD: QBGAACCT LEN(88) DISP(4)
FLD: QBGAGG LEN(4) DISP(4) /*GetPages for GBP Dep pages*/
FLD: QBGAXD LEN(4) TYPE(BIN) DISP(8) /*# of SES reads*/
* necessary due to buffer cross
* invalidation (XI) in which
* data was returned */
FLD: QBGAXR LEN(4) TYPE(BIN) DISP(12) /*# of SES reads*/
* necessary due to buffer XI
* in which data was not
* returned from SES and
* directory entry assignment
* was not suppressed (the
* directory entry previously
* existed or was constructed
* as a result of this SES-read
* request). A DB2 optimization
* will request suppression
* of the directory entry assign-
* ment when no other DB2 in the
* group has R/W interest in the
* pageset/partition */
FLD: QBGAEX LEN(4) TYPE(BIN) DISP(16) /*# of explicit XI's*/
FLD: QBGAMD LEN(4) TYPE(BIN) DISP(20) /*# of SES reads necessary*/
* due to the requested page
* not being found in the
* buffer pool in which data
* was returned from SES. */
FLD: QBGAMR LEN(4) TYPE(BIN) DISP(24) /*# of SES reads*/
* necessary due to the reques-
* ted page not being found in
* the buffer pool in which
* data was not returned and
* directory entry assignment
* was not suppressed (see
* QBGAXR for an
* explanation of directory
* entry suppression). */
FLD: QBGAMN LEN(4) TYPE(BIN) DISP(28) /*# of pages read from GBP*/
* due to prefetch under
* the control of the agent */
FLD: QBGASW LEN(4) TYPE(BIN) DISP(32)
/*# of changed pages written to*/
* the GBP via Write and
* Register (WAR) or Write and
* Register Multiple (WARM) */
FLD: QBGAWC LEN(4) TYPE(BIN) DISP(36) /*# of clean pages written to*/
* the GBP */
FLD: QBGADG LEN(4) TYPE(BIN) DISP(40) /*# of "unregister page"*/
* requests */
FLD: QBGAWM LEN(4) TYPE(BIN) DISP(44) /*# of Write and Register*/
* Multiple (WARM) requests */
FLD: QBGA2S LEN(4) TYPE(BIN) DISP(48)
/*# completion checks for writes*/
* to the secondary GBP that
* were suspended beause the
* write had not yet completed.*/
FLD: QBGAHS LEN(4) TYPE(BIN) DISP(52) /*# Asynch IXLCACHE for P GBP*/
FLD: QBGA2H LEN(4) TYPE(BIN) DISP(56) /*# Asynch IXLCACHE for S GBP*/
FLD: QBGAP1 LEN(4) TYPE(BIN) DISP(60)
/*# page P lock lock requests for*/
* space map pages */
FLD: QBGAP2 LEN(4) TYPE(BIN) DISP(64)
/*# page P lock lock requests for*/
* data pages */
FLD: QBGAP3 LEN(4) TYPE(BIN) DISP(68)
/*# page P lock lock requests for*/
* index leaf pages */
FLD: QBGAU1 LEN(4) TYPE(BIN) DISP(72)
/*# page P lock unlock requests*/
FLD: QBGAS1 LEN(4) TYPE(BIN) DISP(76)
/*# page P lock lock suspensions*/
* for space map pages */
FLD: QBGAS2 LEN(4) TYPE(BIN) DISP(80)
/*# page P lock lock suspensions*/
* for data pages */
FLD: QBGAS3 LEN(4) TYPE(BIN) DISP(84)
/*# page P lock lock suspensions*/
* for index leaf pages */
FLD: QBGAWS LEN(4) TYPE(BIN) DISP(88)
/*# of Write and Register (WAR)*/
* requests */
FLD: QBGAEND LEN(1) DISP(92)
***********************************************************************
**** QTGA DSECT
***********************************************************************
***********************************************************************
* TO REPORT ON ALL OCCURRENCES OF QTGA, USE:
* INPUT: SMF101
* NORMWHEN(SMF101_IFCID3 AND QWA01RAN > 0)
* NORMALIZE(QTGA, QWA01RAN)
***********************************************************************
COMP: QTGA_OFFSET =
WHEN(SMF101_IFCID3 AND QWA01RAN > 0) ASSIGN(QWA01RAO)
ELSE ASSIGN(99999)
FLD: QTGA DISP(0) LEN(44) OFFSET(QTGA_OFFSET)
*/********************************************************************/
*/* In the descriptions below, the term "L-lock" refers to a */
*/* "logical lock", or a lock that is acquired and owned by a */
*/* DB2 thread. The term "P-lock" refers to a */
*/* "physical lock", or a lock that is acquired and owned the */
*/* DB2 subsystem (i.e. P-locks are not owned by threads). */
*/* A P-lock may be requested on behalf of the subsystem under a */
*/* user TCB. */
*/********************************************************************/
FLD: QTGALPLK LEN(4) TYPE(BIN) DISP(0) /*# Lock requests for P locks.*/
* This is a subset of QTXALOCK
* which contains the total #
* of Lock requests (L-locks
* P-locks). */
FLD: QTGACPLK LEN(4) TYPE(BIN) DISP(4)
/*# Change requests for P locks.*/
* This is a subset of QTXACHG
* which contains the total #
* of Change requests (L-locks
* P-locks). */
FLD: QTGAUPLK LEN(4) TYPE(BIN) DISP(8)
/*# Unlock requests for P locks.*/
* This is a subset of QTXAUNLK
* which contains the total #
* of Unlock requests (L-locks
* P-locks). */
FLD: QTGALSLM LEN(4) TYPE(BIN) DISP(12) /*# lock requests propagated*/
* to XES (L-lock or P-lock)
* synchronously, i.e. under
* caller's execution unit. If
* the request suspends for any
* reason, this counter will not
* be incremented. */
FLD: QTGACSLM LEN(4) TYPE(BIN) DISP(16)
/*# change requests propagated*/
* to XES (L-lock or P-lock)
* synchronously, i.e. under
* caller's execution unit. If
* the request suspends for any
* reason, this counter will not
* be incremented. */
FLD: QTGAUSLM LEN(4) TYPE(BIN) DISP(20)
/*# unlock requests propagated*/
* to XES (L-lock or P-lock)
* synchronously, i.e. under
* caller's execution unit. If
* the request suspends for any
* reason, this counter will not
* be incremented. */
*
*
* /****************************************************************/
* /* The following 3 fields give the counts for the number of */
* /* suspends due to global contention for lock requests. A */
* /* "global contention" occurs when inter-system communication */
* /* is required to resolve the lock conflict. This is in */
* /* contrast to a "local contention" in which no inter-system */
* /* communication is required to resolve the lock conflict - the */
* /* conflict can be resolved entirely within the local IRLM for */
* /* local contention. */
* /* */
* /* The sum of QTGAIGLO, QTGASGLO and QTGAFLSE gives the total */
* /* number of suspends due to global contention. */
* /* */
* /* QTXASLOC gives the number of suspends due to local resource */
* /* contention. */
* /****************************************************************/
FLD: QTGAIGLO LEN(4) TYPE(BIN) DISP(24)
/*# suspends due to IRLM global*/
* resource contention. IRLM
* lock states were in conflic*/
FLD: QTGASGLO LEN(4) TYPE(BIN) DISP(28)
/*# suspends due to XES global*/
* resource contention but no
* IRLM global resource con-
* tention. XES lock states were
* in conflict but the IRLM lock
* states were not. */
FLD: QTGAFLSE LEN(4) TYPE(BIN) DISP(32) /*# Summation of false*/
* contentions and sync-to-async
* heuristic conversions. */
FLD: QTGADRTA LEN(4) TYPE(BIN) DISP(36) /*# global lock or change*/
* requests denied or suspended
* because of an incompatible
* retained lock */
FLD: QTGANTFY LEN(4) TYPE(BIN) DISP(40) /*# notify messages sent*/
*
FLD: QTGAEND LEN(1) DISP(44)
***********************************************************************
**** QWDA DSECT
***********************************************************************
***********************************************************************
* TO REPORT ON ALL OCCURRENCES OF QWDA, USE:
* INPUT: SMF101
* NORMWHEN(SMF101_IFCID3 AND QWA01RBN > 0)
* NORMALIZE(QWDA, QWA01RBN)
***********************************************************************
COMP: QWDA_OFFSET =
WHEN(SMF101_IFCID3 AND QWA01RBN > 0) ASSIGN(QWA01RBO)
ELSE ASSIGN(99999)
FLD: QWDA DISP(0) LEN(8) OFFSET(QWDA_OFFSET)
*
*/********************************************************************/
*/* INSTRUMENTATION ACCOUNTING DATA FOR DATA SHARING */
*/********************************************************************/
*
*/********************************************************************/
*/ NOTE: FIELDS DEFINED AS CHARACTER MAY CONTAIN HEX DATA */
*/********************************************************************/
*
FLD: QWDAXCQO LEN(8) DISP(0) /*On a child task this field is a*/
* /* correlating value indicating */
* /* the member name of the parallelism*/
* /* coordinator. This value */
* /* (in conjunction with QWACPACE) */
* /* can be used to correlate all of */
* /* the parallel task records with */
* /* the records of the originating */
* /* task. */
* /* On the coordinating task, there */
* /* may be multiple occurences of the */
* /* QWDA, with a data section for */
* /* each assisting member. The member */
* /* name for the originating task is */
* /* not included in this list. */
* /* If all assisting tasks run on the */
* /* same member as the coordinator, */
* /* there is no QWDA for the */
* /* coordinator. */
* /* The number of QWDA data sections */
* /* is in the QWT02RFN field for IFC's*/
* /* 147, 148 and in the QWA01RBN field*/
* /* for IFC 3. */
*
***********************************************************************
**** QWAX DSECT
***********************************************************************
***********************************************************************
* TO REPORT ON ALL OCCURRENCES OF QWAX, USE:
* INPUT: SMF101
* NORMWHEN(SMF101_IFCID3 AND QWA01RCN > 0)
* NORMALIZE(QWAX, QWA01RCN)
***********************************************************************
COMP: QWAX_OFFSET =
WHEN(SMF101_IFCID3 AND QWA01RCN > 0) ASSIGN(QWA01RCO)
ELSE ASSIGN(99999)
FLD: QWAX DISP(0) LEN(116) OFFSET(QWAX_OFFSET)
*/********************************************************************
* NOTE: The following fields have rollup data if QWACPARR is on in *
* QWACFLAGS. A rollup record is written with accumulated *
* counter data for the following type of threads: *
* *
* - Query parallelism child tasks, if Zparm PTASKROL=YES *
* - DDF and RRSAF threads, is Zparm ACCUMACC is not < 2 *
* *
* Query parallelism child tasks: *
* A rollup record is written with accumulated counter data *
* when the parent task (agent) deallocates on an originating *
* DB2, or whn an accumulating child task deallocated on an *
* assisting DB2. The rollup data is an accumulation of all *
* the counters for that field for each child task that *
* completed and deallocated. *
* *
* DDF and RRSAF threads: *
* A rollup record is written with accumulated counter data for*
* an end user when the number of occurrences of the end user *
* on the thread reaches the Zparm value for ACCUMACC. End *
* user is defined as the concatenation of the following three *
* values: *
* - End user userid (QWHEUID, 16 bytes) *
* - End user transaction name (QWHCEUTX, 32 bytes) *
* - End user workstation name (QWHCEUWN, 18 bytes) *
* *
* QWAXALOG QWAXALCT QWAXARND QWAXAWDR QWAXAWCL QWAXARNC *
* QWAXAWAR QWAXANAR QWAXOCSE QWAXSLSE QWAXDSSE QWAXOTSE *
* QWAXOCNS QWAXSLNS QWAXDSNS QWAXOTNS QWAXAWFC QWAXFCCT *
* QWAXIXLE QWAXIXLT *
* *
**********************************************************************/
*
*
*
*/********************************************************************/
* The following values are applicable only if accounting class 3
* is active. The QWAX section is included only if at least one
* of these values is non-zero.
*/********************************************************************/
FLD: QWAX4 LEN(4) TYPE(BIN) DISP(0)
FLD: QWAXALOG TYPE(STCKTIME) DISP(0)
/*Accumulated wait time due to processing of*/
* ARCHIVE LOG MODE(QUIESCE) commands
* NOTE:
* This number represents the amount of
* time that an individual thread was suspended
* due to an ARCHIVE LOG MODE(QUIESCE) command
* and not the time that it took for the entire
* command to complete */
FLD: QWAXALCT LEN(4) TYPE(BIN) DISP(8)
/*Number of suspensions due to processing*/
* of ARCHIVE LOG MODE(QUIESCE) commands.
* QWAXALCT is a Class 1 value. */
FLD: QWAXX LEN(4) TYPE(BIN) DISP(12)
FLD: QWAXARND LEN(4) TYPE(BIN) DISP(12)
/*Number of wait trace events processed*/
* for waits for a drain lock. */
FLD: QWAXAWDR TYPE(STCKTIME) DISP(16)
/*Accumulated wait time for a drain lock.*/
FLD: QWAXAWCL TYPE(STCKTIME) DISP(24)
/*Accumulated wait time for a drain*/
* when waiting for claims to be released */
FLD: QWAXARNC LEN(4) TYPE(BIN) DISP(32)
/*Number of wait trace events processed*/
* for suspensions to wait for claims to
* be released */
FLD: QWAXAWAR TYPE(STCKTIME) DISP(36)
/*Accumulated wait time for archive reads*/
* /* (TAPE) */
FLD: QWAXANAR LEN(4) TYPE(BIN) DISP(44)
/*Number of wait trace events processed*/
* /* for archive reads */
FLD: QWAXOCSE TYPE(STCKTIME) DISP(48)
/*Accumulated wait time due to synchronous*/
* execution unit switch to the DB2
* Open/Close data set service or the
* HSM recall service. */
FLD: QWAXSLSE TYPE(STCKTIME) DISP(56)
/*Accumulated wait time due to synchronous*/
* execution unit switch to the DB2
* SYSLGRNG recording service. This service
* is also sometimes used for level-id
* checking for down level detection. */
FLD: QWAXDSSE TYPE(STCKTIME) DISP(64)
/*Accumulated wait time due to synchronous*/
* execution unit switch to the DB2
* Dataspace Manager Services, which include:
* - Define data set
* - Extend data set
* - Delete data set
* - Reset data set
* - VSAM catalog access */
FLD: QWAXOTSE TYPE(STCKTIME) DISP(72)
/*Accumulated wait time due to synchronous*/
* execution unit switch to other DB2
* service tasks */
FLD: QWAXOCNS LEN(4) TYPE(BIN) DISP(80)
/*Number of wait trace events processed for*/
* waits for synchronous execution unit
* switching to the Open/Close service. */
FLD: QWAXSLNS LEN(4) TYPE(BIN) DISP(84)
/*Number of wait trace events processed for*/
* waits for synchronous execution unit
* switching to the Syslgrng recording
* service. */
FLD: QWAXDSNS LEN(4) TYPE(BIN) DISP(88)
/*Number of wait trace events processed for*/
* waits for synchronous execution unit
* switching to Dataspace Manager
* service tasks. */
FLD: QWAXOTNS LEN(4) TYPE(BIN) DISP(92)
/*Number of wait trace events processed for*/
* waits for synchronous execution unit
* switching to other service tasks. */
FLD: QWAX2X LEN(4) TYPE(BIN) DISP(96)
FLD: QWAXAWFC TYPE(STCKTIME) DISP(96)
/*Accumulated wait time for commit phase 1*/
* database write I/O completion. */
FLD: QWAXFCCT LEN(4) TYPE(BIN) DISP(104)
/*Number of wait trace events processed for*/
* force-at-commit */
FLD: QWAXIXLE LEN(4) TYPE(BIN) DISP(108)
/*Number of wait trace events processed for*/
* asynch IXLCACHE/IXLFCOMP invocations.
* These are incremented by IFCID 329 which
* is NOT part of a begin/end pair so this
* number represents the true # of events and
* is not doubled as are other wait events. */
FLD: QWAXIXLT LEN(4) TYPE(B-SECS) DISP(112) DEC(6)
/*Accumulated wait time for IXLCACHE and*/
* IXLFCOMP asynch req. in microseconds */
*
FLD: QWAXEND LEN(1) DISP(116)
*
* SCC STATISTICS DATA FOR TYPE 100 SUBTYPE 1 RECORD
* SCC ACCOUNTING DATA FOR TYPE 101 SUBTYPE 0 RECORD
***********************************************************************
**** DSNDQTXA DSECT
***********************************************************************
***********************************************************************
* TO REPORT ON ALL OCCURRENCES OF DSNDQTXA, USE:
* INPUT: SMF101
* NORMWHEN((SMF101_IFCID3 OR SMF101_IFCID239) AND QWA01R4N > 0)
* NORMALIZE(QTXA, QWA01R4N)
***********************************************************************
COMP: QTXA_OFFSET =
WHEN(SMF101_IFCID3 AND QWA01R4N > 0) ASSIGN(QWA01R4O)
WHEN(SMF101_IFCID239 AND QWA11R4N > 0) ASSIGN(QWA11R4O)
ELSE ASSIGN(99999)
FLD: DSNDQTXA DISP(0) LEN(88) OFFSET(QTXA_OFFSET)
FLD: QTXA LEN(8) DISP(0)
FLD: QTXADEA LEN(4) TYPE(BIN) DISP(0) /*Deadlock count*/
FLD: QTXASLOC LEN(4) TYPE(BIN) DISP(4)
/*Number of suspends because of*/
* lock conflicts
FLD: QTXATIM LEN(4) TYPE(BIN) DISP(8) /*Timeout counts*/
FLD: QTXALES LEN(4) TYPE(BIN) DISP(12) /*Count of lock escal shared*/
FLD: QTXALEX LEN(4) TYPE(BIN) DISP(16)
/*Count of lock escal exclusive*/
FLD: QTXANPL LEN(4) TYPE(BIN) DISP(20) /*Max number of page or row*/
* locks held.
* Not applicable for Statistics
* IFCID 2.
FLD: QTXAFLG1 LEN(1) DISP(24) /*First Flag Byte*/
COMP: QTXAILMT = X'80' /*Infinite Limit*/
COMP: QTXANRUN = X'40' /*No Run or Zero Limit*/
FLD: QTXARLID LEN(2) DISP(26) /*Resource Limit Table ID*/
FLD: QTXAPREC LEN(4) TYPE(BIN) DISP(28) /*How Limit was determined*/
COMP: QTXAPRC1 = 1 /*Limit from specific Authid*/
COMP: QTXAPRC2 = 2 /*Limit from specific Authid*/
COMP: QTXAPRC3 = 3 /*Limit from specific Planname*/
COMP: QTXAPRC4 = 4 /*Limit from blank Authid & Plan*/
COMP: QTXAPRC5 = 5 /*Limit from Install no entry*/
COMP: QTXAPRC6 = 6 /*Limit from Install I/O error*/
COMP: QTXAPRC7 = 7 /*Infinite limit user has*/
COMP: QTXAPRC8 = 8 /*Limit from specific Authid,*/
COMP: QTXAPRC9 = 9 /*Limit from specific Authid*/
COMP: QTXAPR10 = 10 /*Limit from specific Authid*/
COMP: QTXAPR11 = 11 /*Limit from Authid running*/
COMP: QTXAPR12 = 12 /*Limit from specific package*/
COMP: QTXAPR13 = 13 /*Limit from any Authid and*/
COMP: QTXAPR14 = 14 /*Limit from any Authid and*/
COMP: QTXAPR15 = 15 /*Limit from any Authid, pkg,*/
FLD: QTXASLMT LEN(4) TYPE(BIN) DISP(32) /*Limit in SU's ASUTIME*/
FLD: QTXACLMT LEN(4) TYPE(BIN) DISP(36)
/*Limit in CPU 16 microseconds*/
FLD: QTXACHUS LEN(4) TYPE(BIN) DISP(40)
/*Highest CPU 16 microsecs used*/
FLD: QTXASLAT LEN(4) TYPE(BIN) DISP(44)
/*Suspend count latch conflict*/
FLD: QTXASOTH LEN(4) TYPE(BIN) DISP(48)
/*Suspend count other conflict*/
FLD: QTXALOCK LEN(4) TYPE(BIN) DISP(52) /*Lock request count*/
FLD: QTXAUNLK LEN(4) TYPE(BIN) DISP(56) /*Unlock request count*/
FLD: QTXAQRY LEN(4) TYPE(BIN) DISP(60) /*Query request count*/
FLD: QTXACHG LEN(4) TYPE(BIN) DISP(64) /*Change request count*/
FLD: QTXAIRLM LEN(4) TYPE(BIN) DISP(68) /*Other IRLM request count*/
FLD: QTXACLNO LEN(4) TYPE(BIN) DISP(72) /*Number of claim requests*/
FLD: QTXACLUN LEN(4) TYPE(BIN) DISP(76)
/*Number of claim requests that*/
* were unsuccessful
FLD: QTXADRNO LEN(4) TYPE(BIN) DISP(80) /*Number of drain requests*/
FLD: QTXADRUN LEN(4) TYPE(BIN) DISP(84)
/*Number of drain requests that*/
* were unsuccessful
FLD: QTXAEND LEN(1) DISP(88)
***********************************************************************
* DSNDQPKG - THIS IS A GENERAL INFORMATION SECTION FOR IFCID 239. *
* IT GIVES INFORMATION ON THE NUMBER OF PACKAGES/DBRMS FOR WHICH*
* DSNDQPAC DATA SECTIONS ARE TO BE EXTERNALIZED FOR THIS AGENT *
* AND WHICH DSNDQPAC SECTIONS APPEAR IN THIS IFCID 239 RECORD. *
* *
* This data section is valid for IFCID 239 records related to a *
* rollup accounting record. *
***********************************************************************
*
***********************************************************************
**** QPKG DSECT PACKAGE/DBRM ACCOUNTING OVERFLOW DATA
***********************************************************************
***********************************************************************
* TO REPORT ON ALL OCCURRENCES OF QPKG, USE:
* INPUT: SMF101
* NORMWHEN(SMF101_IFCID239 AND QWA11R1N > 0)
* NORMALIZE(QPKG, QWA11R1N)
***********************************************************************
COMP: QPKG_OFFSET =
WHEN(SMF101_IFCID239 AND QWA11R1N > 0) ASSIGN(QWA11R1O)
ELSE ASSIGN(99999)
FLD: QPKG DISP(0) LEN(6) OFFSET(QPKG_OFFSET)
/*PACKAGE/DBRM ACCOUNTING OVERFLOW DATA*/
FLD: QPKGPKGN TYPE(HALF) DISP(0)
/*NUMBER OF DSNDQPAC SECTIONS THAT ARE*/
* TO BE EXTERNALIZED FOR THIS AGENT.
* A MAXIMUM OF 10 DSNDQPAC DATA SECTIONS
* WILL APPEAR IN ANY ONE IFCID 239 RECORD.
FLD: QPKGPKNF TYPE(HALF) DISP(2)
/*NUMBER OF THE FIRST DSNDQPAC DATA SECTION*/
* IN THIS IFCID 239 RECORD.
FLD: QPKGPKNL TYPE(HALF) DISP(4)
/*NUMBER OF THE LAST DSNDQPAC DATA SECTION*/
* IN THIS IFCID 239 RECORD.
FLD: QPKGPKEN LEN(1) DISP(6) /*END OF QPKG DSECT*/
*
***********************************************************************
**** QPAC DSECT
***********************************************************************
***********************************************************************
* TO REPORT ON ALL OCCURRENCES OF QPAC, USE:
* INPUT: SMF101
* NORMWHEN(SMF101_IFCID239 AND QWA11R2N > 0)
* NORMALIZE(QPAC, QWA11R2N)
***********************************************************************
COMP: QPAC_OFFSET =
WHEN(SMF101_IFCID239 AND QWA11R2N > 0) ASSIGN(QWA11R2O +2)
ELSE ASSIGN(99999)
FLD: QPAC DISP(0) LEN(402) OFFSET(QPAC_OFFSET)
*
*/********************************************************************/
*/* PACKAGE AND DBRM LEVEL ACCOUNTING DATA MAPPING MACRO FOR */
*/* IFCIDs 0147, 148, AND 239. */
*/* UP TO 10 QPAC DATA SECTIONS MAY APPEAR IN ANY ONE 239 RECORD */
*/* ONLY ONE QPAC SECTION, REPRESENTING THE CURRENT OR MOST */
*/* RECENTLY EXECUTED PACKAGE/DBRM, WILL APPEAR IN IFCIDS 147 */
*/* AND 148. */
*/* ALL INFORMATION RELATES TO THE EXECUTION OF THE NAMED */
*/* PACKAGE OR DBRM BY THE AGENT IN QUESTION ONLY. */
*/* A SEPARATE QPAC DATA SECTION IS GENERATED FOR EVERY LOCAL */
*/* PACKAGE OR DBRM EXECUTED. A QPAC DATA SECTION WILL BE */
*/* GENERATED AT THE LOCAL AND REMOTE SITE FOR APPLICATIONS */
*/* THAT EXERCISE APPLICATION-DIRECTED PROTOCOLS TO EXECUTE A */
*/* PACKAGE AT A REMOTE SITE. */
*/********************************************************************/
*
FLD: QPAC1 LEN(4) TYPE(BIN) DISP(0)
FLD: QPACRECN TYPE(HALF) DISP(0) /*NUMBER OF THIS DSNDQPAC DATA*/
* SECTION IN THE SERIES OF
* DSNDQPAC DATA SECTIONS THAT
* MAY BE EXTERNALIZED IN IFCID
* 239. QWACPKGN AND QPKGPKGN
* IDENTIFY THE NUMBER OF PACKAGES
* AND DBRMS FOR WHICH PACKAGE/
* DBRM ACCOUNTING HAS BEEN
* PERFORMED. */
FLD: QPACFLGS TYPE(HALF) DISP(2) /*FLAGS*/
*
*/********************************************************************/
*/* BIT MEANINGS FOR QPACFLGS. */
*/* QPACDBRM AND QPACPACK ARE MUTUALLY EXCLUSIVE. */
*/* THE OTHER QPACFLGS BITS ARE NOT MUTUALLY EXCLUSIVE. */
*/********************************************************************/
*
COMP: QPACDBRM = X'0001' /*THIS QPAC DATA ACCOUNTS FOR*/
COMP: QPACPACK = X'0002' /*THIS QPAC DATA ACCOUNTS FOR*/
COMP: QPACCLS8 = X'0004' /*THERE IS NON ZERO ACCOUNTING*/
COMP: QPACCRNT = X'0008' /*CURRENT OR MOST RECENTLY*/
COMP: QPACINSP = X'0010' /*THIS PACKAGE WAS LOADED BY A*/
COMP: QPACCLS7 = X'0020' /*THERE IS NON ZERO ACCOUNTING*/
COMP: QPACPAC = X'0040' /*SUCCESSFUL AUTH CHECK WITHOUT*/
FLD: QPACPKNM LEN(60) DISP(4) /*PACKAGE NAME*/
FLD: QPACLOCN LEN(16) DISP(4) /*%U LOCATION NAME*/
* /* Truncated if QPACLOCN_Off¬=0 */
FLD: QPACCOLN LEN(18) DISP(20) /*%U PACKAGE COLLECTION ID*/
* /* Truncated if QPACCOLN_Off¬=0 */
FLD: QPACPKID LEN(18) DISP(38) /*%U PROGRAM NAME*/
* /* Truncated if QPACPKID_Off¬=0 */
FLD: QPACCONT LEN(8) DISP(56) /*CONSISTENCY TOKEN 64 BIT*/
* /*UNSIGNED BINARY INTEGER */
*
FLD: QPACA101 LEN(4) TYPE(BIN) DISP(64)
*
FLD: QPACSQLC LEN(4) TYPE(BIN) DISP(64)
/*SQL REQUEST COUNT The number*/
* /*of SQL statements issued. */
* /* NOTE - This field may */
* /* not equal the sum total of */
* /* all SQL statement counters in */
* /* the DSNDQXST data section. */
* /* This is because DSNDQXST does */
* /* not count all SQL statements */
* /* For example, DSNDQXST does */
* /* not include a counter for */
* /* COMMIT or ROLLBACK. */
*
*/********************************************************************/
*/* NOTE: FIELDS DEFINED AS CHARACTER MAY CONTAIN HEX DATA */
*/* */
*/*NOTE - THE FOLLOWING TIMES INDICATE A LEVEL OF ACTIVITY FOR */
*/* THE THREAD ADDRESS SPACE DURING THE PERIOD OF TIME THE */
*/* AUTHORIZATION ID WAS ACTIVE AND EXECUTING UNDER THE PACKAGE/DBRM*/
*/* NAMED IN QPACPKNM. */
*/* */
*/********************************************************************/
*
*/********************************************************************/
*/*THE FOLLOWING VALUES THROUGH QPACARNA ARE CALCULATED IF ACCOUNTING*/
*/* CLASS 7 IS ACTIVE. ACCOUNTING CLASS 7 REPRESENTS THE AMOUNT OF */
*/* TIME SPENT PROCESSING A PARTICULAR PACKAGE OR DBRM. THIS IS */
*/* ENTRY TO DB2 TO EXECUTE A PACKAGE TO EXIT FROM DB2. */
*/* IT IS POSSIBLE FOR A BEGIN ELAPSED OR CPU TIME TO BE 0 AND THE */
*/* END ELAPSED OR CPU TIME TO BE NON-ZERO. THIS MAY OCCUR WHEN */
*/* A PACKAGE/DBRM SWITCH OCCURS. THE END ELAPSED TIME WILL */
*/* REPRESENT THE TIME AT WHICH PROCESSING LAST EXITED DB2 WHILE */
*/* PROCESSING THIS PACKAGE OR DBRM. THE BEGIN TIMES OF THE PACKAGE */
*/* OR DBRM THAT PROCESSING SWITCHES FROM ARE SET TO 0. */
*/********************************************************************/
FLD: QPACSCB TYPE(STCKTIME) DISP(68)
/*STORE CLOCK VALUE AT ENTRY TO DB2 FOR*/
* /* MOST RECENT EXECUTION OF THIS PACKAGE */
* /* OR DBRM. */
FLD: QPACSCE TYPE(STCKTIME) DISP(76)
/*STORE CLOCK VALUE AT EXIT FROM DB2 AFTER*/
* /* MOST RECENT EXECUTION OF THIS PACKAGE */
* /* OR DBRM. */
FLD: QPACSCT TYPE(STCKTIME) DISP(84)
/*TOTAL ELAPSED TIME SPENT PROCESSING ALL*/
* /* EXECUTIONS OF THIS PACKAGE OR DBRM */
FLD: QPACBJST TYPE(STCKTIME) DISP(92)
/*CPU time at entry to DB2 for the most*/
* /* recent execution of this package or dbrm.*/
* /* This time does not include CPU consumed */
* /* on an IBM ZIIP. */
FLD: QPACEJST TYPE(STCKTIME) DISP(100)
/*CPU time at exit from DB2 fro the most*/
* /* recent execution of this package or dbrm.*/
* /* This time does not include CPU consumed */
* /* on an IBM ZIIP. */
FLD: QPACTJST TYPE(STCKTIME) DISP(108)
/*Total CPU time for all executions of this*/
* /* package or dbrm. This time does not */
* /* include CPU consumed on an IBM ZIIP. */
FLD: QPACARNA LEN(4) TYPE(BIN) DISP(116)
/*NUMBER OF DB2 ENTRY OR EXIT EVENTS PRO*/
* /* CESSED WHILE EXECUTING THIS PACKAGE OR */
* /* DBRM. */
*
*
*/********************************************************************/
*/* THE FOLLOWING VALUES THROUGH QPACARNH ARE CALCULATED IF THE */
*/* OPTIONAL ACCOUNTING CLASS 8 IS ACTIVE. ACCOUNTING CLASS 8 */
*/* MAINTAINS TIME SPENT WAITING FOR RESOURCES IN DB2 WHILE */
*/* EXECUTING THIS PACKAGE OR DBRM. */
*/* SUSPENSIONS WHICH OCCUR AFTER ENTRY TO DB2 BUT BEFORE IT IS */
*/* DETERMINED WHICH PACKAGE IS TO BE EXECUTED ARE NOT ATTRIBUTED */
*/* TO ANY PACKAGE, EVEN THOUGH THE SAME TIME PERIOD IS ATTRIBUTED */
*/* TO THE EXECUTED PACKAGE FOR ELAPSED AND CPU TIME PURPOSES. */
*/********************************************************************/
*
FLD: QPACARNE LEN(4) TYPE(BIN) DISP(120)
/*NUMBER OF WAIT TRACE EVENTS PROCESSED FOR*/
* /* WAITS FOR I/O UNDER THIS THREAD WHILE */
* /* EXECUTING THIS PACKAGE OR DBRM */
*
*/********************************************************************/
*/*THE FOLLOWING TWO VALUES ARE CALCULATED FOR THREADS BY TAKING THE */
*/* STCK TIME ON ENTRY TO EVENT WAIT AND SUBTRACTING STCK ON EXIT */
*/* RESUME FROM THE EVENT. */
*/********************************************************************/
*
FLD: QPACAWTI TYPE(STCKTIME) DISP(124)
/*ACCUMULATED I/O ELAPSED WAIT TIME FOR*/
* /* I/O DONE UNDER THIS THREAD WHILE */
* /* EXECUTING THIS PACKAGE OR DBRM. */
FLD: QPACAWTL LEN(8) DISP(132)
/*ACCUMULATED LOCK AND LATCH ELAPSED WAIT*/
* /* TIME FOR LOCK AND LATCH SUSPENSIONS */
* /* THAT OCCURRED WHILE EXECUTING THIS */
* /* PACKAGE OR DBRM. */
*
*/********************************************************************/
*/*THE FOLLOWING FOUR VALUES ARE CALCULATED FOR THREADS BY TAKING */
*/* THE STCK TIME ON ENTRY TO EVENT WAIT AND SUBTRACTING STCK ON EXIT*/
*/* RESUME FROM THE EVENT. */
*/********************************************************************/
*
FLD: QPACAWTR TYPE(STCKTIME) DISP(140)
/*ACCUMULATED WAIT TIME FOR READ I/O THAT*/
* /* IS DONE UNDER A THREAD OTHER THAN THIS */
* /* ONE WHILE EXECUTING THIS PACKAGE OR */
* /* DBRM. */
FLD: QPACAWTW TYPE(STCKTIME) DISP(148)
/*ACCUMULATED WAIT TIME FOR WRITE I/O THAT*/
* /* IS DONE UNDER A THREAD OTHER THAN THIS */
* /* ONE WHILE EXECUTING THIS PACKAGE OR */
* /* DBRM. */
FLD: QPACAWTE TYPE(STCKTIME) DISP(156)
/*ACCUMULATED WAIT TIME DUE TO SYNCHRONOUS*/
* /* EXECUTION UNIT SWITCH TO DB2 SERVICES */
* /* FROM THIS THREAD WHILE EXECUTING THIS */
* /* PACKAGE OR DBRM. THE FOLLOWING DB2 */
* /* SERVICE WAITS ARE INCLUDED IN THIS */
* /* FIELD: */
* /* - OPEN/CLOSE DATA SET */
* /* - SYSLGRNG UPDATE */
* /* - HSM RECALL DATA SET */
* /* - DATASPACE MANAGER SERVICES */
* /* - DEFINE DATA SET */
* /* - EXTEND DATA SET */
* /* - DELETE DATA SET */
* /* NOTE: */
* /* - THERE IS NO OVERLAP BETWEEN THE */
* /* ELAPSED TIME REPORTED IN THIS FIELD */
* /* AND THE OTHER CLASS 8 ELAPSED TIMES. */
* /* - THERE IS NO OVERLAP BETWEEN THE */
* /* ELAPSED TIME REPORTED IN THIS FIELD */
* /* AND THE ELAPSED TIME REPORTED IN */
* /* QLACCPUL FOR THREADS WITH DISTRIBUTED*/
* /* ACTIVITY. */
FLD: QPACALOG TYPE(STCKTIME) DISP(164)
/*ACCUMULATED WAIT TIME DUE TO PROCESSING*/
* /* OF ARCHIVE LOG MODE(QUIESCE) COMMANDS */
* /* WHILE EXECUTING THIS PACKAGE OR DRBM. */
* /* NOTE: */
* /* THIS NUMBER REPRESENTS THE AMOUNT OF */
* /* TIME THAT AN INDIVIDUAL THREAD WAS */
* /* SUSPENDED DUE TO AN ARCHIVE LOG MODE */
* /* (QUIESCE) COMMAND AND NOT THE TIME */
* /* THAT IT TOOK FOR THE ENTIRE COMMAND TO*/
* /* COMPLETE */
FLD: QPACARNL LEN(4) TYPE(BIN) DISP(172)
/*NUMBER OF WAIT TRACE EVENTS PROCESSED FOR*/
* /* WAITS FOR LOCK/LATCH WHILE EXECUTING */
* /* THIS PACKAGE OR DBRM. */
FLD: QPACARNR LEN(4) TYPE(BIN) DISP(176)
/*NUMBER OF WAIT TRACE EVENTS PROCESSED FOR*/
* /* WAITS FOR READ I/O UNDER ANOTHER THREAD */
* /* WHILE EXECUTING THIS PACKAGE OR DBRM */
FLD: QPACARNW LEN(4) TYPE(BIN) DISP(180)
/*NUMBER OF WAIT TRACE EVENTS PROCESSED FOR*/
* /* WAITS FOR WRITE I/O UNDER ANOTHER THREAD*/
* /* WHILE EXECUTING THIS PACKAGE OR DBRM */
FLD: QPACARNS LEN(4) TYPE(BIN) DISP(184)
/*NUMBER OF WAIT TRACE EVENTS PROCESSED*/
* /* FOR WAITS FOR SYNCHRONOUS EXECUTION UNIT*/
* /* SWITCHING TO DB2 SERVICE TASKS WHILE */
* /* EXECUTING THIS PACKAGE OR DBRM */
FLD: QPACALCT LEN(4) TYPE(BIN) DISP(188)
/*NUMBER OF SUSPENSIONS DUE TO PROCESSING*/
* /* OF ARCHIVE LOG MODE(QUIESCE) COMMANDS */
* /* WHILE EXECUTING THIS PACKAGE OR DBRM */
*
FLD: QPAC2 LEN(4) TYPE(BIN) DISP(192)
*
FLD: QPACARND LEN(4) TYPE(BIN) DISP(192)
/*Number of wait trace events processed*/
* /* for waits for a drain lock while */
* /* executing this package or DBRM. */
FLD: QPACAWDR TYPE(STCKTIME) DISP(196)
/*Accumulated wait time for a drain lock*/
* /* while executing this package or DBRM. */
FLD: QPACAWCL TYPE(STCKTIME) DISP(204)
/*Accumulated wait time for a drain when*/
* /* waiting for claims to be released */
* /* while executing this package or DBRM. */
FLD: QPACARNC LEN(4) TYPE(BIN) DISP(212)
/*Number of wait trace events processed*/
* /* for suspensions to wait for claims to */
* /* be released while executing this */
* /* package or DBRM. */
FLD: QPACAWAR TYPE(STCKTIME) DISP(216)
/*Accumulated wait time for archive reads*/
* /* (TAPE) while executing this package */
* /* or DBRM. */
FLD: QPACANAR LEN(4) TYPE(BIN) DISP(224)
/*Number of wait trace events processed*/
* /* for archive reads while executing this */
* /* package or DBRM. */
FLD: QPACAWTP TYPE(STCKTIME) DISP(228)
/*Accumulated wait time due to page latch*/
* /* contention while executing this */
* /* package or DBRM. */
FLD: QPACARNH LEN(4) TYPE(BIN) DISP(236)
/*Number of wait trace events processed*/
* /* for page latch contention while */
* /* executing this package or DBRM. */
*/*********************************************************************
* The following values through QPACARNJ are calculated if
* Accounting Class 8 is started and if DB2 is a member of a DB2
* data sharing group.
**********************************************************************/
*
FLD: QPACA261 LEN(4) TYPE(BIN) DISP(240)
FLD: QPACAWTG TYPE(STCKTIME) DISP(240)
/*Accumulated wait time due to sending of*/
* messages within the DB2 data sharing
* group. */
FLD: QPACAWTJ TYPE(STCKTIME) DISP(248)
/*Accumulated wait time due to global*/
* contention for parent L-locks. Global
* contention occurs when inter-system
* communication is required to resolve an
* IRLM Lock or Change request. QPACAWTL
* contains the wait time due to local
* contention. Local contention does not
* require inter-system communciation - it
* can be resolved by the local subsystem. */
FLD: QPACARNG LEN(4) TYPE(BIN) DISP(256)
/*Number of wait trace events processed*/
* for messages within the DB2 data sharing
* group. */
FLD: QPACARNJ LEN(4) TYPE(BIN) DISP(260)
/*Number of wait trace events processed*/
* for waits for global lock contention for
* parent L-locks. */
*/*********************************************************************
* The following values through QPACCANM are calculated for
* stored procedures if accounting class 8 is started.
**********************************************************************/
*
FLD: QPACA302 LEN(1)
FLD: QPACCAST TYPE(STCKTIME) DISP(264)
/*RESERVED SP wait time is at the plan*/
* /* level and will not be recorded for pkgs */
FLD: QPACCANM LEN(4) TYPE(BIN) DISP(272) /*RESERVED At plan level*/
FLD: QPACSPNS LEN(4) TYPE(BIN) DISP(276)
/*The number of stored procedures executed*/
*
*/*********************************************************************
* The following values through QPACCANM are calculated for
* user defined functions if accounting class 8 is started.
**********************************************************************/
*
FLD: QPACA303 LEN(1)
FLD: QPACUDST TYPE(STCKTIME) DISP(280)
/*RESERVED UDF wait time is at the plan*/
* /* level and will not be recorded for pkgs */
FLD: QPACUDNU LEN(4) TYPE(BIN) DISP(288)
/*Number of user defined functions scheduled*/
**********************************************************************
*
FLD: QPACA304 LEN(1)
FLD: QPACASCH LEN(8) DISP(292) /*%U Nested activity schema name*/
* /* Truncated if QPACASCH_Off¬=0 */
FLD: QPACAANM LEN(18) DISP(300) /*%U Name of activity*/
* /* Truncated if QPACAANM_Off¬=0 */
FLD: QPACAAFG LEN(2) DISP(318) /*Activity flag*/
* /* 01 - stored procedure */
* /* 02 - user defined function */
* /* 03 - trigger executing */
*/********************************************************************/
*/* Additional counters for global wait times. These counters */
*/* break out values that were previously all contained in */
*/* QPACAWTJ and QPACARNJ. */
*/********************************************************************/
FLD: QPACA305 LEN(1)
FLD: QPACAWTK TYPE(STCKTIME) DISP(320)
/*Accumulated wait time due to global*/
* contention for child L-locks. */
FLD: QPACAWTM TYPE(STCKTIME) DISP(328)
/*Accumulated wait time due to global*/
* contention for other L-locks */
FLD: QPACAWTN TYPE(STCKTIME) DISP(336)
/*Accumulated wait time due to global*/
* contention for pageset/partition P-locks */
FLD: QPACAWTO TYPE(STCKTIME) DISP(344)
/*Accumulated wait time due to global*/
* contention for page P-locks */
FLD: QPACAWTQ TYPE(STCKTIME) DISP(352)
/*Accumulated wait time due to global*/
* contention for other P-locks */
FLD: QPACARNK LEN(4) TYPE(BIN) DISP(360)
/*Number of wait trace events processed*/
* for waits for global contention for
* child L-locks */
FLD: QPACARNM LEN(4) TYPE(BIN) DISP(364)
/*Number of wait trace events processed*/
* for waits for global contention for
* other L-locks */
FLD: QPACARNN LEN(4) TYPE(BIN) DISP(368)
/*Number of wait trace events processed*/
* for waits for global contention for
* pageset/partition P-locks */
FLD: QPACARNO LEN(4) TYPE(BIN) DISP(372)
/*Number of wait trace events processed*/
* for waits for global contention for
* page P-locks */
FLD: QPACARNQ LEN(4) TYPE(BIN) DISP(376)
/*Number of wait trace events processed*/
* for waits for global contention for
* other P-locks */
*
FLD: QPACLOCN_OFF TYPE(HALF) DISP(380) /*Offset from QPAC to*/
* /* LOCATION NAME */
* /* If QPACLOCN truncated */
FLD: QPACCOLN_OFF TYPE(HALF) DISP(382) /*Offset from QPAC to*/
* /* PACKAGE COLLECTION ID */
* /* If QPACCOLN truncated */
FLD: QPACPKID_OFF TYPE(HALF) DISP(384) /*Offset from QPAC to*/
* /* PROGRAM NAME */
* /* If QPACPKID truncated */
FLD: QPACASCH_OFF TYPE(HALF) DISP(386) /*Offset from QPAC to*/
* /* Nested activity schema name */
* /* If QPACASCH truncated */
FLD: QPACAANM_OFF TYPE(HALF) DISP(388) /*Offset from QPAC to*/
* /* Name of activity */
* /* If QPACASCH truncated */
FLD: QPACZIIP LEN(1)
FLD: QPACCLS7_ZIIP TYPE(STCKTIME) DISP(392)
/*Total CPU time for all executions of this*/
* /* package or dbrm consumed on an IBM ZIIP. */
FLD: QPACEND LEN(1) DISP(400)
*
*
*
***********************************************************************
**** QPACLOCN_D DSECT /* Use if QPACLOCN_Off¬=0 */
***********************************************************************
COMP: QPACLOCN_D_OFFSET =
WHEN(QPAC_OFFSET<>99999 AND QPACLOCN_OFF<>0)
ASSIGN(QPAC_OFFSET + QPACLOCN_OFF)
ELSE ASSIGN(99999)
FLD: QPACLOCN_D DISP(0) LEN(1) OFFSET(QPACLOCN_D_OFFSET)
/*Use if QPACLOCN_Off¬ 0*/
FLD: QPACLOCN_LEN TYPE(HALF) DISP(0) /*Length of the following field*/
FLD: QPACLOCN_VAR LEN(128) DISP(2)/*%U LOCATION NAME*/
*
*
*
***********************************************************************
**** QPACCOLN_D DSECT /* Use if QPACCOLN_Off¬=0 */
***********************************************************************
COMP: QPACCOLN_D_OFFSET =
WHEN(QPAC_OFFSET<>99999 AND QPACCOLN_OFF<>0)
ASSIGN(QPAC_OFFSET + QPACCOLN_OFF)
ELSE ASSIGN(99999)
FLD: QPACCOLN_D DISP(0) LEN(1) OFFSET(QPACCOLN_D_OFFSET)
/*Use if QPACCOLN_Off¬ 0*/
FLD: QPACCOLN_LEN TYPE(HALF) DISP(0) /*Length of the following field*/
FLD: QPACCOLN_VAR LEN(128) DISP(2)/*%U PACKAGE COLLECTION ID*/
*
*
***********************************************************************
**** QPACPKID_D DSECT /* Use if QPACPKID_Off¬=0 */
***********************************************************************
COMP: QPACPKID_D_OFFSET =
WHEN(QPAC_OFFSET<>99999 AND QPACPKID_OFF<>0)
ASSIGN(QPAC_OFFSET + QPACPKID_OFF)
ELSE ASSIGN(99999)
FLD: QPACPKID_D DISP(0) LEN(1) OFFSET(QPACPKID_D_OFFSET)
/*Use if QPACPKID_Off¬ 0*/
FLD: QPACPKID_LEN TYPE(HALF) DISP(0) /*Length of the following field*/
FLD: QPACPKID_VAR LEN(128) DISP(2)/*%U PROGRAM NAME*/
*
*
***********************************************************************
**** QPACASCH_D DSECT /* Use if QPACASCH_Off¬=0 */
***********************************************************************
COMP: QPACASCH_D_OFFSET =
WHEN(QPAC_OFFSET<>99999 AND QPACASCH_OFF<>0)
ASSIGN(QPAC_OFFSET + QPACASCH_OFF)
ELSE ASSIGN(99999)
FLD: QPACASCH_D DISP(0) LEN(1) OFFSET(QPACASCH_D_OFFSET)
/*Use if QPACASCH_Off¬ 0*/
FLD: QPACASCH_LEN TYPE(HALF) DISP(0) /*Length of the following field*/
FLD: QPACASCH_VAR LEN(128) DISP(2)/*%U Nested activity schema name*/
*
*
***********************************************************************
**** QPACAANM_D DSECT /* Use if QPACLOCN_Off¬=0 */
***********************************************************************
COMP: QPACAANM_D_OFFSET =
WHEN(QPAC_OFFSET<>99999 AND QPACAANM_OFF<>0)
ASSIGN(QPAC_OFFSET + QPACAANM_OFF)
ELSE ASSIGN(99999)
FLD: QPACAANM_D DISP(0) LEN(1) OFFSET(QPACAANM_D_OFFSET)
/*Use if QPACLOCN_Off¬ 0*/
FLD: QPACAANM_LEN TYPE(HALF) DISP(0) /*Length of the following field*/
FLD: QPACAANM_VAR LEN(128) DISP(2)/*%U Name of activity*/
*
* SCC STATISTICS DATA FOR TYPE 100 SUBTYPE 1 RECORD
* SCC ACCOUNTING DATA FOR TYPE 101 SUBTYPE 0 RECORD
***********************************************************************
**** DSNDQXPK DSECT
***********************************************************************
COMP: QXPK_OFFSET =
WHEN(QWHSIID = 239 AND QWA11R5N > 0) ASSIGN(QWA11R5O)
ELSE ASSIGN(99999)
FLD: DSNDQXPK DISP(0) LEN(1) OFFSET(QXPK_OFFSET)
FLD: QXPK LEN(8) DISP(0)
FLD: QPSELECT LEN(4) TYPE(BIN) DISP(0) /*# of SELECTS*/
FLD: QPINSRT LEN(4) TYPE(BIN) DISP(4) /*# of INSERTS*/
FLD: QPUPDTE LEN(4) TYPE(BIN) DISP(8) /*# of UPDATES*/
FLD: QPDELET LEN(4) TYPE(BIN) DISP(12) /*# of DELETES*/
FLD: QPDESC LEN(4) TYPE(BIN) DISP(16) /*# of DESCRIBES*/
FLD: QPPREP LEN(4) TYPE(BIN) DISP(20) /*# of PREPARES*/
FLD: QPOPEN LEN(4) TYPE(BIN) DISP(24) /*# of OPENS*/
FLD: QPCLOSE LEN(4) TYPE(BIN) DISP(28) /*# of CLOSES*/
FLD: QPFETCH LEN(4) TYPE(BIN) DISP(32) /*# of FETCHS*/
FLD: QPLOCK LEN(4) TYPE(BIN) DISP(36) /*# of LOCK TABLES*/
FLD: QPCALL LEN(4) TYPE(BIN) DISP(40) /*# of SQL CALL statements*/
FLD: QPPKEND LEN(1) DISP(44)
FLD: SMF101_END LEN(1) OFFSET(0) |
We further select on the value in the DB2PLAN field to get just the trace records for the plan we are interested in.
We then print a report showing various data fields from the SMF 101 records for that plan. We leave the report in SMF log time order.
All of this with just a few lines of code!
All of this with just a dozen lines of code!
Sample Report from SMF 101 Records
showing Correlation, Distribution and Data Sharing Info
for records with specified DB2PLANs
The sample SMF report below was created with Spectrum SMF Writer,
the low-cost 4GL SMF report writer. It reads as input the SMF file and selects just the type 101 (DB2 Accounting) records with IFCID 3 (accounting trace records). (See SMF 101 record layout.)
Why not install a Spectrum SMF Writer trial right now and start making your own SMF reports!
These Spectrum SMF Writer Statements:
OPTION: HDGSEP('/') /* CHANGE DEFAULT SEPERATOR CHAR */
INPUT: SMF101
INC: SM101RTY = 101 AND QWHSIID =3 /* IFCID 003 */
AND QWHCPLAN = 'MAJSERVR'
COL: SM101DTE SM101TME
QWHCCV('CORRELATION')
QWHCCN('CONNECTION')
QWHCPLAN('DB2PLAN')
QWHCOPID('OPERATOR/ID')
QWHDRQNM('REQUESTOR/LOCATION')
QWHADSGN('SHARING/GROUP')
QWHAMEMN('MEMBER/NAME')
TITLE: /'DB2 ACCOUNTING INFO FOR DB2PLAN: MAJSERVR' / #DATE ' ' #TIME
Produce This SMF Report:
DB2 ACCOUNTING INFO FOR DB2PLAN: MAJSERVR 07/21/09 9:23 AM
OPERATO REQUESTOR SHARING MEMBER
SM101DTE SM101TME CORRELATION CONNECTION DB2PLAN ID LOCATION GROUP NAME
09/23/08 10:40:03.28 db2trbWebSph SERVER MAJSERVR SETUP 192.168.43.100 DSN9KJT DBT4
09/23/08 10:40:05.26 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:40:13.65 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:40:14.98 db2trbNon-de SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:40:20.91 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:40:21.99 db2trbNon-de SERVER MAJSERVR SETUP 192.168.43.100 DSN9KJT DBT4
09/23/08 10:40:25.47 db2trbWebSph SERVER MAJSERVR SETUP 192.168.25.37 DSN9KJT DBT4
09/23/08 10:40:26.94 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:40:34.42 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:40:35.11 db2trbNon-de SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:40:41.43 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:40:46.74 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:40:48.39 db2trbWebSph SERVER MAJSERVR SETUP 192.168.43.100 DSN9KJT DBT4
09/23/08 10:40:53.43 db2trbWebSph SERVER MAJSERVR SETUP 192.168.25.37 DSN9KJT DBT4
09/23/08 10:40:53.44 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:40:56.49 db2trbNon-de SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:41:03.01 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:41:10.36 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:41:13.04 db2trbWebSph SERVER MAJSERVR SETUP 192.168.43.100 DSN9KJT DBT4
09/23/08 10:41:17.30 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:41:24.22 db2trbWebSph SERVER MAJSERVR SETUP 192.168.25.37 DSN9KJT DBT4
09/23/08 10:41:25.02 db2trbNon-de SERVER MAJSERVR SETUP 192.168.43.100 DSN9KJT DBT4
09/23/08 10:41:25.09 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:41:25.41 db2trbNon-de SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:41:31.93 db2trbWebSph SERVER MAJSERVR SETUP 192.168.43.100 DSN9KJT DBT4
09/23/08 10:41:33.77 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:41:39.88 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:41:45.52 db2trbNon-de SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:41:48.58 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:41:52.39 db2trbWebSph SERVER MAJSERVR SETUP 192.168.25.37 DSN9KJT DBT4
09/23/08 10:41:54.54 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:42:01.84 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:42:03.32 db2trbWebSph SERVER MAJSERVR SETUP 192.168.43.100 DSN9KJT DBT4
09/23/08 10:42:07.97 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:42:15.72 db2trbNon-de SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:42:16.88 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:42:18.91 db2trbWebSph SERVER MAJSERVR SETUP 192.168.25.37 DSN9KJT DBT4
09/23/08 10:42:24.84 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:42:27.82 db2trbNon-de SERVER MAJSERVR SETUP 192.168.43.100 DSN9KJT DBT4
09/23/08 10:42:28.41 db2trbWebSph SERVER MAJSERVR SETUP 192.168.43.100 DSN9KJT DBT4
09/23/08 10:42:33.09 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:42:38.56 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:42:44.68 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:42:45.82 db2trbNon-de SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:42:48.66 db2trbWebSph SERVER MAJSERVR SETUP 192.168.25.37 DSN9KJT DBT4
09/23/08 10:42:48.87 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:42:52.25 db2trbWebSph SERVER MAJSERVR SETUP 192.168.43.100 DSN9KJT DBT4
09/23/08 10:42:57.25 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:43:05.92 db2trbNon-de SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:43:07.10 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:43:12.74 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:43:12.99 db2trbWebSph SERVER MAJSERVR SETUP 192.168.25.37 DSN9KJT DBT4
09/23/08 10:43:20.73 db2trbWebSph SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
09/23/08 10:43:23.18 db2trbWebSph SERVER MAJSERVR SETUP 192.168.43.100 DSN9KJT DBT4
09/23/08 10:43:26.03 db2trbNon-de SERVER MAJSERVR SETUP 192.168.24.30 DSN9KJT DBT4
...
Sample Report from SMF 101 Records
showing SQL Statement Counts
The sample SMF report below was created with Spectrum SMF Writer,
the low-cost 4GL SMF report writer. It reads as input the SMF file and selects just the type 101 DB2 accounting records. (See SMF 101 record layout.) It then prints a report line for each DB2 accounting record written. The report shows statistical information about those DB2 jobs, including a count of the number of DB2 statements executed by each one.
Why not install a Spectrum SMF Writer trial right now and start making your own SMF reports!
These Spectrum SMF Writer Statements:
OPTION: PC /* FORMAT "REPORT" AS A PC EXPORT FILE */
INPUT: SMF101V2 LIST(NO )
NORMWHEN((SMF101_IFCID239 AND QWA11R2N > 0) OR
(SMF101_IFCID3 AND QWA01R8N > 0))
NORMALIZE(QPAC_SECTION, QPAC_NUM)
INC: (SM101RTY = 101 AND (QWHSIID=239 OR QWHSIID=3))
COMPUTE: CORRELATION_ID = #SUBSTR(QWHCCV,1,8)
COMPUTE: SORT_FIELD = QWHCPLAN + ' ' + CORRELATION_ID + ' ' + QPACPKID
COMPUTE: NUM_QPACTJST = #MAKENUM(QPACTJST)
COMPUTE: NUM_QPACSCT = #MAKENUM(QPACSCT)
COLUMNS: SORT_FIELD('PLAN,CORRID,PCK')
NUM_QPACTJST(PIC'9999999999.999999')
NUM_QPACSCT(PIC'9999999999.999999')
QPACSQLC(PIC'99999999999')
SM101TME
SM101DTE
Produce This SMF Report:
" ","NUM","NUM"," "," "," "
"PLAN,CORRID,PCK","QPACTJST","QPACSCT","QPACSQLC","SM101TME","SM101DTE"
" "," "," "," "," "," "
"DISTSERV perl SQLLF000 ",0000000000.001705,0000000000.003016,00000000007,"20:46:33.18","10/13/09"
"DISTSERV perl SQLLF000 ",0000000000.000490,0000000000.000649,00000000007,"20:46:33.18","10/13/09"
"DISTSERV perl SQLLF000 ",0000000000.000489,0000000000.000755,00000000015,"20:46:33.19","10/13/09"
"DISTSERV perl SQLLF000 ",0000000000.000367,0000000000.000652,00000000007,"20:46:33.31","10/13/09"
"DISTSERV perl SQLLF000 ",0000000000.001659,0000000000.002048,00000000006,"20:46:33.33","10/13/09"
"DISTSERV perl SQLLF000 ",0000000000.001572,0000000000.004666,00000000006,"20:46:33.35","10/13/09"
"DISTSERV perl SQLLF000 ",0000000000.000339,0000000000.000900,00000000007,"20:46:33.35","10/13/09"
"DISTSERV perl SQLLF000 ",0000000000.001660,0000000000.002735,00000000007,"20:46:33.36","10/13/09"
"DISTSERV perl SQLLF000 ",0000000000.000477,0000000000.000967,00000000007,"20:46:33.37","10/13/09"
"DISTSERV perl SQLLF000 ",0000000000.000423,0000000000.000435,00000000015,"20:46:33.39","10/13/09"
"ISPP0001 POOL#4MR OMSX1102 ",0000000000.000203,0000000000.001711,00000000001,"20:46:33.45","10/13/09"
"ISPP0001 POOL#4MR RFSX0186 ",0000000000.000359,0000000000.034634,00000000001,"20:46:33.45","10/13/09"
"ISPP0001 POOL#4MR RFSX0079 ",0000000000.000110,0000000000.000112,00000000002,"20:46:33.45","10/13/09"
"ISPP0001 POOL#4MR OMSX1105 ",0000000000.000323,0000000000.002370,00000000002,"20:46:33.45","10/13/09"
"ISPP0001 POOL#4MR OMSX0073 ",0000000000.000611,0000000000.002070,00000000002,"20:46:33.45","10/13/09"
"ISPP0001 POOL#4MR OMSX1108 ",0000000000.001351,0000000000.037147,00000000024,"20:46:33.45","10/13/09"
"ISPP0001 POOL#4MR OMSX0097 ",0000000000.011409,0000000000.167797,00000000042,"20:46:33.45","10/13/09"
"ISPP0001 POOL#4MR OR030F18 ",0000000000.003451,0000000000.042930,00000000042,"20:46:33.45","10/13/09"
"ISPP0001 POOL#4MR OMSX1100 ",0000000000.000310,0000000000.025603,00000000001,"20:46:33.45","10/13/09"
"ISPP0001 POOL#4MR OMSX1106 ",0000000000.001146,0000000000.051818,00000000023,"20:46:33.45","10/13/09"
"ISPP0001 POOL#4MR OMSX0912 ",0000000000.004310,0000000000.004402,00000000080,"20:46:33.45","10/13/09"
"ISPP0001 POOL#4MR OMSX0093 ",0000000000.002879,0000000000.002935,00000000036,"20:46:33.45","10/13/09"
"ISPP0001 POOL#6XZ RFSX0079 ",0000000000.000063,0000000000.000063,00000000001,"20:46:33.47","10/13/09"
"ISPP0001 POOL#6XZ OMSX0504 ",0000000000.000227,0000000000.000229,00000000001,"20:46:33.47","10/13/09"
"ISPP0001 POOL#6XZ RFSX0186 ",0000000000.000223,0000000000.004857,00000000001,"20:46:33.47","10/13/09"
"DISTSERV perl SQLLF000 ",0000000000.000389,0000000000.002541,00000000007,"20:46:33.51","10/13/09"
"DISTSERV perl SQLLF000 ",0000000000.001626,0000000000.008175,00000000006,"20:46:33.54","10/13/09"
"DISTSERV perl SQLLF000 ",0000000000.001578,0000000000.002004,00000000006,"20:46:33.54","10/13/09"
"DISTSERV perl SQLLF000 ",0000000000.000322,0000000000.000339,00000000007,"20:46:33.55","10/13/09"
"DISTSERV perl SQLLF000 ",0000000000.001650,0000000000.005157,00000000007,"20:46:33.56","10/13/09"
