








	*SMF Tools*

SMF Type 70 Record

This table shows the record layout for type 70 SMF records
(RMF Processor Activity - z/OS 2.4).

List of other SMF record layouts available.
List of sample SMF reports.

Purpose: Record type 70 is written for each measurement interval and when the session terminates. As with all SMF records produced by RMF, it contains a header section followed by the RMF product section.

Record type 70 has the following subtypes:

Subtype 1 – contains measurement data for general and special purpose processors, logical partitions, and internal coupling facilities. It has the following sections:
- CPU control section Contains general CPU related information.
- CPU data section Contains general information on CPU use during the interval.
- ASID data area section Contains address space use during the interval.
- PR/SM partition data section Contains a configured logical partition.
- PR/SM logical processor data section Contains a PR/SM logical processor data block.
- CPU identification section Identifies a CPU type.
- Logical Core data section Contains logical core measurements in a multithreading environment.
- Tenant Resource Group data section Contains general tenant resource group and tenant information as well as processor consumption measurements for the interval.
Subtype 2 — contains measurement data for cryptographic coprocessors and accelerators. It has the following sections:
- Cryptographic coprocessor data section Contains measurement data for cryptographic coprocessors.
- Cryptographic accelerator data section Contains measurement data for cryptographic accelerators.
- ICSF Services data section Contains measurement data of selected Integrated Cryptographic Service Facility (ICSF) activities on either the CCF hardware or on the PCIXCC hardware (for z990 processors).
- Cryptographic PKCS11 Coprocessor data section Contains measurement data for cryptographic PKCS11 coprocessors.

It's easy to report on SMF 70 data! (Jump to sample reports)

We have a low-cost 4GL report writer especially for SMF files. It's called Spectrum SMF Writer.

Spectrum SMF Writer handles the difficult SMF record parsing for you automatically. You just specify which fields you want to see.

Spectrum SMF Writer also converts the arcane date and time fields and reformats them into an attractive report.

Plus, Spectrum SMF Writer can export SMF data as comma delimited files to use on your PC.

SMF Type 70 Record -- RMF Processor Activity - z/OS 2.4

Offset
(Dec.)

Offset
(Hex)

Name

Length

Format

Description

SMF70LEN

binary

Record length. This field and the next field (total of four bytes) form the RDW (record descriptor word). See “Standard SMF Record Header” on page 13-1 for a detailed description.

SMF70SEG

binary

Segment descriptor (see record length field).

SMF70FLG

binary

System indicator: Bit Meaning When Set 0 New record format 1 Subtypes used 2 Reserved. 3-6 Version indicators* 7 System is running in PR/SM mode.*See “Standard SMF Record Header” on page 13-1 for a detailed description.

SMF70RTY

binary

Record type 70 (X'46').

SMF70TME

binary

Time since midnight, in hundredths of a second, that the record was moved into the SMF buffer.

SMF70DTE

packed

Date when the record was moved into the SMF buffer, in the form 0cyydddF. See “Standard SMF Record Header” on page 13-1 for a detailed description.

SMF70SID

EBCDIC

System identification (from the SMFPRMxx SID parameter).

SMF70SSI

EBCDIC

Subsystem identification (‘RMF’).

SMF70STY

binary

Record subtype.

SMF70TRN

binary

Number of triplets in this record. A triplet is a set of three SMF fields (offset/length/number values) that defines a section of the record. The offset is the offset from the RDW.

binary

Reserved.

SMF70PRS

binary

Offset to RMF product section from the RDW.

SMF70PRL

binary

Length of RMF product section.

SMF70PRN

binary

Number of RMF product sections.

Individual header extension for subtype 1:

SMF70CCS

binary

Offset to CPU control section from RDW.

SMF70CCL

binary

Length of CPU control section.

SMF70CCN

binary

Number of CPU control section.

SMF70CPS

binary

Offset to CPU data section from RDW.

SMF70CPL

binary

Length of CPU data section.

SMF70CPN

binary

Number of CPU data sections in this record.

SMF70ASS

binary

Offset to ASID data section from RDW.

SMF70ASL

binary

Length of ASID data section.

SMF70ASN

binary

Number of ASID data sections.

SMF70BCS

binary

Offset to PR/SM partition data section from RDW.

SMF70BCL

binary

Length of PR/SM partition data section.

SMF70BCN

binary

Number of PR/SM partition data sections.

SMF70BVS

binary

Offset to PR/SM logical processor data section from RDW.

SMF70BVL

binary

Length of PR/SM logical processor data section.

SMF70BVN

binary

Number of PR/SM logical processor data sections.

SMF70CNS

binary

Offset to CPU-identification name sections.

SMF70CNL

binary

Length of CPU-identification name section.

SMF70CNN

binary

Number of CPU-identification name sections.

SMF70COS

binary

Offset to Logical Core data section from RDW.

SMF70COL

binary

Length of Logical Core data section.

SMF70CON

binary

Number of Logical Core data sections.

SMF70TNS

binary

Offset to Tenant Resource Group data section from RDW.

SMF70TNL

binary

Length of Tenant Resource Group data section.

SMF70TNN

binary

Number of Tenant Resource Group data sections

Individual header extension for subtype 2:

SMF7023S

binary

Offset to cryptographic coprocessor data section.

SMF7023L

binary

Length of cryptographic coprocessor data section.

SMF7023N

binary

Number of cryptographic coprocessor data sections.

SMF7024S

binary

Offset to cryptographic accelerator data section.

SMF7024L

binary

Length of cryptographic accelerator data section.

SMF7024N

binary

Number of cryptographic accelerator data sections.

SMF702CS

binary

Offset to ICSF Services Data Section.

SMF702CL

binary

Length of ICSF Services Data Section.

SMF702CN

binary

Number of ICSF Services Data Sections.

SMF7025S

binary

Offset to Cryptographic PKCS11 Coprocessor data section.

SMF7025L

binary

Length of Cryptographic PKCS11 Coprocessor data section.

SMF7025N

binary

Number of Cryptographic PKCS11 Coprocessor data sections.

RMF Product Section(Offset from beginning of record: SMF70PRS)

SMF70MFV

packed

RMF version number.

SMF70PRD

EBCDIC

Product name (‘RMF’).

SMF70IST

packed

Time that the RMF measurement interval started, in the form 0hhmmssF, where hh is the hours, mm is the minutes, ss is the seconds, and F is the sign.

SMF70DAT

packed

Date when the RMF measurement interval started, in the form 0cyydddF. See “Standard SMF Record Header” on page 13-1 for a detailed description.

SMF70INT

packed

Duration of the RMF measurement interval, in the form mmsstttF where mm is the minutes, ss is the seconds, ttt is the milliseconds, and F is the sign. (The end of the measurement interval is the sum of the recorded start time and this field.)

binary

Reserved.

SMF70SAM

binary

Number of RMF samples.

binary

Reserved.

SMF70FLA

binary

Flags
Bit Meaning When Set
0 Reserved
1 Samples have been skipped
2 Record was written by RMF Monitor III
3 Interval was synchronized with SMF
4-8 Reserved
9 zIIP boost was active during entire interval
10 Speed boost was active during entire interval
13-15 Boost class
001 - IPL
010 - Sutdown

binary

Reserved.

SMF70CYC

packed

Sampling cycle length, in the form 000ttttF, where tttt is the milliseconds and F is the sign (taken from CYCLE option). The range of values is 0.050 to 9.999 seconds.

SMF70MVS

EBCDIC

MVS software level (consists of an acronym and the version, release, and modification level - ZVvvrrmm).

SMF70IML

binary

Indicates the type of processor complex on which data measurements were taken. Value Meaning 3 9672, zSeries 49 31 SMF73PRF 1 binary Processor flags.
Bit Meaning When Set
0 The system has expanded storage
1 The processor is enabled for ES connection architecture (ESCA)
2 There is an ES connection director in the configuration
3 System is running in z/Architecture mode
4 At least one zAAP is currently installed
5 At least one zIIP is currently installed
6 Enhanced DAT architecture available
7 Reserved.

SMF70PTN

binary

PR/SM partition number of the partition that wrote this record.

SMF70SRL

binary

SMF record level change number (X'8C' for z/OS V2R4 RMF). This field enables processing of SMF record level changes in an existing release.

SMF70IET

char

Interval expiration time token. This token can be used to identify other than RMF records that belong to the same interval (if interval was synchronized with SMF).

SMF70LGO

binary

Offset GMT to local time (STCK format).

SMF70RAO

binary

Offset to reassembly area relative to start of RMF product section.

SMF70RAL

binary

Length of reassembly area. Area consists of a fixed header and a variable number of information blocks. Length depends on the record type/subtype, but is fixed for a specific type/subtype.

SMF70RAN

binary

Reassembly area indicator. Value Meaning 0 Record is not broken. 1 Record is broken.Note: This field is used to indicate whether an SMF record is a broken record. Therefore, offset (SMF70RAO) and length (SMF70RAL) are only valid if SMF70RAN = 1. A reassembly area is only present in broken records.

SMF70OIL

binary

Original interval length as defined in the session or by SMF (in seconds).

SMF70SYN

binary

SYNC value in seconds.

SMF70GIE

binary

Projected gathering interval end (STCK format) GMT time.

SMF70XNM

EBCDIC

Sysplex name as defined in parmlib member COUPLExx.

SMF70SNM

EBCDIC

System name for current system as defined in parmlib member IEASYSxx SYSNAME parameter.

Reassembly Area(Offset from beginning of record: SMF70PRS + SMF70RAO)

SMF70RBR

binary

Total number of broken records built from the original large record.

SMF70RSQ

binary

Sequence number of this broken record. Every broken record built from the same large record must have a unique sequence number, it is in the range from 1 to SMF70RBR.

SMF70RIO

binary

Offset to first reassembly information block relative to start of reassembly area header.

SMF70RIL

binary

Length of reassembly information block.

SMF70RIN

binary

Number of reassembly information blocks (same value as SMF70TRN in header section).

binary

Reserved.

Reassembly Area Information Block(Offset from beginning of record: SMF70PRS + SMF70RAO + SMF70RIO)

SMF70RNN

binary

Total number of sections in the original large record. This field contains information of how many sections of a specific type were contained in the original SMF record. This field is a copy of the number field of the triplet in the original (non broken) record.

SMF70RPP

binary

Position of the first of one or more consecutive sections described by this block as in the original record. Values in the range of 1 to SMF70RNN are valid for correct processing. A value of 0 will skip processing of this information block. This field provides information where the sections that are part of this broken record were placed in the original record before the split took place. The actual number of consecutive sections contained in this record is available from the actual triplet in the header extension.

CPU Control Section
(Present for subtype 1)
There is one section per record.(Offset from beginning of record: SMF70CCS)

SMF70MOD

EBCDIC

CPU processor family.

SMF70VER

binary

CPU version number — meaning varies with model number.

SMF70BNP

binary

Number of physical processors assigned for use by PR/SM.

SMF70INB

binary

PR/SM indicator bits
Bit Meaning When Set
0 PR/SM diagnose X’204’ failure.
1 Number of physical processors has changed.
2 Dispatch interval time has been changed.
3 An additional partition, that is not included in the count of configured partitions, is presented with a name of “PHYSICAL”. This partition includes all of the uncaptured time that was used by the LPAR management time support feature but could not be attributed to a specific logical partition.
4 PR/SM - Diagnose X’204’ extended data is supported.
5 Simplified Diagnose X'204' data provided for system running as z/VM guest. CPU consumption by z/VM itself provided with partition data section for logical partition named PHYSICAL.
6-7 Reserved.

SMF70STF

binary

Flag
Bit Meaning When Set
0 The STSI facility is available for the CPC.
1 Physical CPU adjustment factor has been changed.
2 Service units available to MVS image have been changed.
3 SMF70LAC is provided for systems running in LPAR mode or as a z/VM guest. The value does no longer include CPU wait times.
4 SMF70MDL is the model-capacity identifier and SMF70HWM is the physical model. If this bit is OFF, SMF70MDL represents both model-capacity and physical model.
5 OPT parameter BLWLTRPCT changed.
6 OPT parameter BLWLINTHD changed.
7 Field SMF70GAU is valid.

SMF70GTS

binary

Dispatch accumulated interval time in milliseconds. A zero value indicates that the dispatch interval was dynamically determined.

SMF70MDL

EBCDIC

CPC model identifier.

SMF70DSA

binary

Number of Diagnose samples.

SMF70IFA

binary

IFA processors online at the end of the interval.

SMF70CPA

binary

Physical CPU adjustment factor (will be used for converting processor time to service units).

SMF70WLA

binary

Processor capacity available to MVS image measured in MSUs (millions of service units) per hour. The value takes into account whether or not the image has a defined capacity limit. (For systems running as VM guest, this is the VM capacity).

SMF70LAC

binary

Long-term average of CPU service (millions of service units)

SMF70HOF

binary

Hypervisor date/time offset in STCK format (aka Sysplex timer offset).

SMF70HWM

EBCDIC

CPC physical model identifier. Valid if bit 4 of SMF70STF is set.

SMF70SUP

binary

Number of zIIPs online at the end of the interval.

SMF70GJT

EBCDIC

Time in STCK format when the partition that wrote this record has joined or left a capacity group (last change of group name). Also set at IPL time, when the partition is not a member of a capacity group.

SMF70POM

EBCDIC

EBCDIC plant code that identifies the plant of manufacture for the configuration. The plant code is left-justified with trailing blank characters if necessary.

SMF70CSC

EBCDIC

EBCDIC sequence code of the configuration. The sequence code is right-justified with leading EBCDIC zeroes if necessary.

SMF70HHF

binary

HiperDispatch and multithreading information
Bit - Meaning when set
0 HiperDispatch mode supported
1 HiperDispatch mode is active
2 HiperDispatch mode changed during interval
3 Failure returned by HISMT service. Values in Logical Core data section and values provided in SMF70MCF, SMF70MCFS, SMF70MCFI, SMF70CF, SMF70CFS, SMF70CFI, SMF70ATD, SMF70ATDS, and SMF70ATDI are invalid.
4 Absolute MSU capping is active for this partition.
5 SMF70OS_PRTCT is valid.
6-7 Reserved

binary

Reserved.

SMF70PMI

binary

Accumulated number of blocked dispatchable units per second that may get promoted in their dispatch priority. To get the average promote event rate, divide SMF70PMI by SMF70SAM.

100

SMF70PMU

binary

Number of blocked dispatchable units being promoted during the interval.

104

SMF70PMW

binary

Accumulated number of address spaces and enclaves being blocked during the interval. To get the average number of waiters for promote, divide SMF70PMW by SMF70SAM.

108

SMF70PMP

binary

Maximum number of address spaces and enclaves found being blocked during the interval.

112

SMF70PMT

binary

1/1000s of the CPU capacity for promote slices (OPT parameter BLWLTRPCT).

114

SMF70PML

binary

Swapped-in starvation threshold. When an address space or enclave has not received CPU service within this time interval although it has ready-to-run work, it is considered being blocked (OPT parameter BLWLINTHD).

116

SMF70MPC

EBCDIC

CPC model identifier indicating the permanent capacity of the CPC, without the temporarily increased capacity and the temporarily available replacement capacity. The identifier is left justified with trailing blanks if necessary. This field is zero, if not supported by the hardware.

132

SMF70MTC

EBCDIC

CPC model identifier indicating the temporary capacity of the CPC, which is the total of permanent capacity and temporarily increased capacity, without the temporarily available replacement capacity. The identifier is left justified with trailing blanks if necessary. This field is zero, if not supported by the hardware.

148

SMF70MCR

binary

CPC model capacity rating associated with the model as identified by SMF70MDL. This field is zero, if not supported by the hardware.

152

SMF70MPR

binary

CPC permanent model capacity rating associated with the model as identified by SMF70MPC. This field is zero, if not supported by the hardware.

156

SMF70MTR

binary

CPC temporary model capacity rating associated with the model as identified by SMF70MTC. This field is zero, if not supported by the hardware.

160

SMF70ZEP

binary

ZEP field 1.

164

SMF70ZER

binary

ZEP field 2.

172

SMF70ZEE

binary

ZEP field 3.

180

SMF70ZEC

binary

ZEP field 4.

188

SMF70NRM

binary

Normalization factor for zIIP. Multiply zIIP time by this value and divide by 256 to get the equivalent time on a CP

192

SMF70GAU

binary

Long-term average of CPU service in millions of service units which would be allowed by the limit of the capacity group but is not used by its mmbers. If the value is negative, the group is capped. Valid if bit 7 of SMF70STF is set.

196

SMF70ZEI

binary

ZEP field 5.

204

SMF70NCR

binary

Nominal model-capacity rating in MSU/hour. When non-zero, this value is associated with the nominal model capacity as identified in field SMF70MDL. When field SMF70CAI contains a value of 100, this value equals the value in field SMF70MCR.

208

SMF70NPR

binary

Nominal permanent model-capacity rating in MSU/hour. When non-zero, this value is associated with the nominal permanent model capacity as identified in field SMF70MPC. When field SMF70CAI contains a value of 100, this value equals the value in field SMF70MPR.

212

SMF70NTR

binary

Nominal temporary model-capacity rating in MSU/hour. When non-zero, this value is associated with the nominal temporary model capacity as identified in field SMF70MTC. When field SMF70CAI contains a value of 100, this value equals the value in field SMF70MTR.

216

SMF70CAI

binary

Capacity-adjustment indication. When zero, the indication is not reported. When in the range from 1 to 99, some amount of reduction is indicated. When 100, the machine is operating at its normal capacity. Temporary capacity changes that affect machine performance (for example, CBU or OOCoD) are not included.

217

SMF70CCR

binary

Capacity-change reason. Valid if SMF70CAI is non-zero. When 0, no capacity change took place. When 1, the capacity change is due to the setting of a manual control. When greater than 1, the capacity change is due to an internal machine condition or due to an external machine exception.

218

SMF70MCP

binary

Maximum CPU ID available for this IPL.

220

SMF70ICP

binary

Highest CPU ID installed at IPL time.

222

SMF70CCP

binary

Highest CPU ID currently installed. This number can increase upon dynamic CPU addition.

224

SMF70CPA_
actual

binary

Physical CPU adjustment factor based on Model Capacity Rating (will be used for converting processor time to service units). This value together with SMF70CPA_scaling_factor replaces SMF70CPA.

228

SMF70CPA_
scaling_
factor

binary

Scaling factor for SMF70CPA_actual.

232

SMF70MCF

binary

Multithreading maximum capacity numerator for general purpose processors. Divide this value by 1024 to get the multithreading maximum capacity factor for all general purpose processors that were configured ONLINE for the complete interval.

236

SMF70MCFS

binary

Multithreading maximum capacity numerator for zIIP. Divide this value by 1024 to get the multithreading maximum capacity factor for all zIIPs that were configured ONLINE for the complete interval. A zero value is reported if no zIIP is currently installed.

240

SMF70MCFI

binary

Multithreading maximum capacity numerator for zAAP. Divide this value by 1024 to get the multithreading maximum capacity factor for all zAAPs that were configured ONLINE for the complete interval. A zero value is reported if no zAAP is currently installed.

244

SMF70CF

binary

Multithreading capacity numerator for general purpose processors. Divide this value by 1024 to get the multithreading capacity factor for all general purpose processors that were configured ONLINE for the complete interval.

248

SMF70CFS

binary

Multithreading capacity numerator for zIIP. Divide this value by 1024 to get the multithreading capacity factor for all zIIPs that were configured ONLINE for the complete interval. A zero value is reported if no zIIP is currently installed.

252

SMF70CFI

binary

Multithreading capacity numerator for zAAP. Divide this value by 1024 to get the multithreading capacity factor for all zAAPs that were configured ONLINE for the complete interval. A zero value is reported if no zAAP is currently installed.

256

100

SMF70ATD

binary

Average Thread Density numerator for general purpose processors . Divide this value by 1024 to get the average number of active threads for all general purpose processors that were dispatched to physical hardware and configured ONLINE for the complete interval.

260

104

SMF70ATDS

binary

Average Thread Density numerator for zIIP. Divide this value by 1024 to get the average number of active threads for all zIIPs that were dispatched to physical hardware and configured ONLINE for the complete interval. A zero value is reported if no zIIP is currently installed.

264

108

SMF70ATDI

binary

Average Thread Density numerator for zAAP. Divide this value by 1024 to get the average number of active threads for all zAAPs that were dispatched to physical hardware and configured ONLINE for the complete interval. A zero value is reported if no zAAP is currently installed.

268

10C

SMF70LACM

binary

Long-term average of CPU service (millions of service units) consumed by transactions classified with reporting attribute MOBILE. If an address space or enclave is part of a tenant resource group, it will not contribute to SMF70LACM.

272

110

SMF70LACA

binary

Long-term average of CPU service (millions of service units) consumed by transactions classified with reporting attribute CATEGORYA. If an address space or enclave is part of a tenant resource group, it will not contribute to SMF70LACA.

276

114

SMF70LACB

binary

Long-term average of CPU service (millions of service units) consumed by transactions classified with reporting attribute CATEGORYB. If an address space or enclave is part of a tenant resource group, it will not contribute to SMF70LACB.

280

118

SMF70ADJ

binary

Logical adjustment factor for CPU rate.

284

11C

SMF70LACCR

binary

Long-term average of CPU service (millions of service units) consumed by DFSMS data set encryption. Valid only for IBM z14 and later CPCs.

288

120

SMF70MaxPU

binary

When non-zero, this field indicates how many processor cores are physically available in this particular machine. When the value is 0, it is not defined for this model.

290

122

SMF70OS_
PRTCT

binary

When non-zero, OSPROTECT system parameter with a value other than SYSTEM is in effect.
X'01' indicates OSPROTECT=1.

291

123

binary

Reserved.

292

124

SMF70MDL_
CBP

EBCDIC

Reserved for future use.

308

134

SMF70MCR_
CBP

binary

Reserved for future use.

312

138

SMF70NCR_
CBP

binary

Reserved for future use.

316

13C

SMF70LAC_
CBP

binary

Reserved for future use.

320

140

SMF70CPA_
actual_
CBP

binary

Reserved for future use.

324

144

SMF70_
IPL_
TIME

binary

IPL time of partition, in TOD format.

332

14C

SMF70_
TRG_
M_
CNT

binary

Number of times sampling of tenant resource group memory consumption happened.

336

150

SMF70CRW

binary

Reserved.

340

154

SMF70CPC_
TYPE

binary

CPC Type.

CPU Data Section
(Present for subtype 1)
This section contains general information on CPU use during
the interval. All measurements are provided on a
per logical processor basis.(Offset from beginning of record: SMF70CPS)

SMF70WAT

binary

CPU wait time, where bit 51 = 1 microsecond. That is, the amount of time that the CPU is not processing instructions (PSW wait state bit is on). Data could be incorrect if a SET CLOCK occurred during the RMF interval. Note: This field is incorrect if MVS is running under VM.

SMF70CID

binary

CPU identification

SMF70CNF

binary

Configuration activity indicator Bit Meaning When Set 0-3 Reserved 4 Data available for complete interval 5 CPU reconfigured during post processor duration interval 6 CPU reconfigured during the measurement interval (data for this CPU is incorrect) 7 CPU online at end of interval.

binary

Reserved.

SMF70SER

char

CPU serial number (6 hexadecimal digits).

SMF70TYP

binary

CPU type.
Value Meaning
0 Standard CP processor
1 zAAP
2 zIIP

SMF70SLH

binary

Number of entries to the I/O SLIH; number of I/O interruptions that this processor handled by entry into the I/O interrupt handler.

SMF70TPI

binary

Number of TPI (test pending interrupt) with CC=1; number of I/O interruptions that this processor handled from issuing the TPI instruction.

SMF70VFS

binary

Number of samples when the vector bit in the PSA image was on, which is used to determine the percentage of time vector affinity was on.

SMF70V

binary

Vector configuration Bit Meaning When Set 0 Vector was online 1-7 Reserved.

binary

Reserved.

SMF70PAT

binary

CPU parked time, where bit 51 = 1 microsecond.

SMF70TCB

binary

Number of TCB dispatches for this CPU.

SMF70SRB

binary

Number of SRB dispatches for this CPU.

SMF70NIO

binary

Number of I/Os for this CPU.

SMF70SIG

binary

Total number of SIGPs done by this CPU.

SMF70WTD

binary

Wait dispatch count for this CPU.

SMF70WTS

binary

The number of times PR/SM issued a warning-track interruption to a logical processor and z/OS was able to return the logical processor within the grace period.

ASID Data Area Section
(Present for subtype 1)
This section contains address space use during the interval(Offset from beginning of record: SMF70ASS)

SMF70RMN

binary

Ready minimum value over interval.

SMF70RMM

binary

Ready maximum value over interval.

SMF70RTT

binary

Ready total value over interval.

SMF70R00

binary

Count of times ready value was zero.

SMF70R01

binary

Count of times ready value was 1.

SMF70R02

binary

Count of times ready value was 2.

SMF70R03

binary

Count of times ready value was 3.

SMF70R04

binary

Count of times ready value was 4.

SMF70R05

binary

Count of times ready value was 5.

SMF70R06

binary

Count of times ready value was 6.

SMF70R07

binary

Count of times ready value was 7.

SMF70R08

binary

Count of times ready value was 8.

SMF70R09

binary

Count of times ready value was 9.

SMF70R10

binary

Count of times ready value was 10.

SMF70R11

binary

Count of times ready value was 11.

SMF70R12

binary

Count of times ready value was 12.

SMF70R13

binary

Count of times ready value was 13.

SMF70R14

binary

Count of times ready value was 14.

SMF70R15

binary

Count of times ready value was 15 or more.

SMF70IMN

binary

IN users minimum over interval.

SMF70IMM

binary

IN users maximum over interval.

SMF70ITT

binary

IN users total value over interval.

SMF70I00

binary

Count of times IN users was zero.

SMF70I01

binary

Count of times IN users was 1 or 2.

SMF70I02

binary

Count of times IN users was 3 or 4.

SMF70I03

binary

Count of times IN users was 5 or 6.

SMF70I04

binary

Count of times IN users was 7 or 8.

100

SMF70I05

binary

Count of times IN users was 9 or 10.

104

SMF70I06

binary

Count of times IN users was 11 - 15.

108

SMF70I07

binary

Count of times IN users was 16 - 20.

112

SMF70I08

binary

Count of times IN users was 21 - 25.

116

SMF70I09

binary

Count of times IN users was 26 - 30.

120

SMF70I10

binary

Count of times IN users was 31 - 35.

124

SMF70I11

binary

Count of times IN users was 36 or more.

128

SMF70OMN

binary

Out users minimum over interval.

130

SMF70OMM

binary

Out users maximum over interval.

132

SMF70OTT

binary

Out users total value over interval.

136

SMF70O00

binary

Count of times out users was zero.

140

SMF70O01

binary

Count of times out users was 1 or 2.

144

SMF70O02

binary

Count of times out users was 3 or 4.

148

SMF70O03

binary

Count of times out users was 5 or 6.

152

SMF70O04

binary

Count of times out users was 7 or 8.

156

SMF70O05

binary

Count of times out users was 9 or 10.

160

SMF70O06

binary

Count of times out users was 11 - 15.

164

SMF70O07

binary

Count of times out users was 16 - 20.

168

SMF70O08

binary

Count of times out users was 21 - 25.

172

SMF70O09

binary

Count of times out users was 26 - 30.

176

SMF70O10

binary

Count of times out users was 31 - 35.

180

SMF70O11

binary

Count of times out users was 36 or more.

184

SMF70WMN

binary

Wait user minimum over interval.

186

SMF70WMM

binary

Wait users maximum over interval.

188

SMF70WTT

binary

Wait users total value over interval.

192

SMF70W00

binary

Count of times wait users was zero.

196

SMF70W01

binary

Count of times wait users was 1 or 2.

200

SMF70W02

binary

Count of times wait users was 3 or 4.

204

SMF70W03

binary

Count of times wait users was 5 or 6.

208

SMF70W04

binary

Count of times wait users was 7 or 8.

212

SMF70W05

binary

Count of times wait users was 9 or 10.

216

SMF70W06

binary

Count of times wait users was 11 - 15.

220

SMF70W07

binary

Count of times wait users was 16 - 20.

224

SMF70W08

binary

Count of times wait users was 21 - 25.

228

SMF70W09

binary

Count of times wait users was 26 - 30.

232

SMF70W10

binary

Count of times wait users was 31 - 35.

236

SMF70W11

binary

Count of times wait users was 36 or more.

240

SMF70BMN

binary

Batch users minimum over interval.

242

SMF70BMM

binary

Batch users maximum over interval.

244

SMF70BTT

binary

Batch users total value over interval.

248

SMF70B00

binary

Count of times batch users was zero.

252

SMF70B01

binary

Count of times batch users was 1 or 2.

256

100

SMF70B02

binary

Count of times batch users was 3 or 4.

260

104

SMF70B03

binary

Count of times batch users was 5 or 6.

264

108

SMF70B04

binary

Count of times batch users was 7 or 8.

268

10C

SMF70B05

binary

Count of times batch users was 9 or 10

272

110

SMF70B06

binary

Count of times batch users was 11 - 15.

276

114

SMF70B07

binary

Count of times batch users was 16 - 20.

280

118

SMF70B08

binary

Count of times batch users was 21 - 25.

284

11C

SMF70B09

binary

Count of times batch users was 26 - 30.

288

120

SMF70B10

binary

Count of times batch users was 31 - 35.

292

124

SMF70B11

binary

Count of times batch users was 36 or more.

296

128

SMF70SMN

binary

Started users minimum over interval.

298

12A

SMF70SMM

binary

Started users maximum over interval.

300

12C

SMF70STT

binary

Started users total value over interval.

304

130

SMF70S00

binary

Count of times users was zero.

308

134

SMF70S01

binary

Count of times users was 1 or 2.

312

138

SMF70S02

binary

Count of times users was 3 or 4.

316

13C

SMF70S03

binary

Count of times users was 5 or 6.

320

140

SMF70S04

binary

Count of times users was 7 or 8.

324

144

SMF70S05

binary

Count of times users was 9 or 10.

328

148

SMF70S06

binary

Count of times users was 11 - 15.

332

14C

SMF70S07

binary

Count of times users was 16 - 20.

336

150

SMF70S08

binary

Count of times users was 21 - 25.

340

154

SMF70S09

binary

Count of times users was 26 - 30.

344

158

SMF70S10

binary

Count of times users was 31 - 35.

348

15C

SMF70S11

binary

Count of times users was 36 or more.

352

160

SMF70TMN

binary

TSO/E users minimum over interval.

354

162

SMF70TMM

binary

TSO/E users maximum over interval.

356

164

SMF70TTT

binary

TSO/E users total value over interval.

360

168

SMF70T00

binary

Count of times TSO/E users was zero.

364

16C

SMF70T01

binary

Count of times TSO/E users was 1 or 2.

368

170

SMF70T02

binary

Count of times TSO/E users was 3 or 4.

372

174

SMF70T03

binary

Count of times TSO/E users was 5 or 6.

376

178

SMF70T04

binary

Count of times TSO/E users was 7 or 8.

380

17C

SMF70T05

binary

Count of times TSO/E users was 9 or 10.

384

180

SMF70T06

binary

Count of times TSO/E users was 11 - 15.

388

184

SMF70T07

binary

Count of times TSO/E users was 16 - 20.

392

188

SMF70T08

binary

Count of times TSO/E users was 21 - 25.

396

18C

SMF70T09

binary

Count of times TSO/E users was 26 - 30.

400

190

SMF70T10

binary

Count of times TSO/E users was 31 - 35.

404

194

SMF70T11

binary

Count of times TSO/E users was 36 or more.

408

198

SMF70LMN

binary

Logical ready users minimum over interval.

410

19A

SMF70LMM

binary

Logical ready users maximum over interval.

412

19C

SMF70LTT

binary

Logical ready users total value over interval.

416

1A0

SMF70L00

binary

Count of times the number of logical ready users was zero.

420

1A4

SMF70L01

binary

Count of times the number of logical ready users was 1 or 2.

424

1A8

SMF70L02

binary

Count of times the number of logical ready users was 3 or 4.

428

1AC

SMF70L03

binary

Count of times the number of logical ready users was 5 or 6.

432

1B0

SMF70L04

binary

Count of times the number of logical ready users was 7 or 8.

436

1B4

SMF70L05

binary

Count of times the number of logical ready users was 9 or 10.

440

1B8

SMF70L06

binary

Count of times the number of logical ready users was 11 - 15.

444

1BC

SMF70L07

binary

Count of times the number of logical ready users was 16 - 20.

448

1C0

SMF70L08

binary

Count of times the number of logical ready users was 21 - 25.

452

1C4

SMF70L09

binary

Count of times the number of logical ready users was 26 - 30.

456

1C8

SMF70L10

binary

Count of times the number of logical ready users was 31 - 35.

460

1CC

SMF70L11

binary

Count of times the number of logical ready users was 36 or more.

464

1D0

SMF70AMN

binary

Logical wait users minimum over interval.

466

1D2

SMF70AMM

binary

Logical wait users maximum over interval.

468

1D4

SMF70ATT

binary

Logical wait users total value over interval.

472

1D8

SMF70A00

binary

Count of times the number of logical wait users was zero.

476

1DC

SMF70A01

binary

Count of times the number of logical wait users was 1 or 2.

480

1E0

SMF70A02

binary

Count of times the number of logical wait users was 3 or 4.

484

1E4

SMF70A03

binary

Count of times the number of logical wait users was 5 or 6.

488

1E8

SMF70A04

binary

Count of times the number of logical wait users was 7 or 8.

492

1EC

SMF70A05

binary

Count of times the number of logical wait users was 9 or 10.

496

1F0

SMF70A06

binary

Count of times the number of logical wait users was 11 - 15.

500

1F4

SMF70A07

binary

Count of times the number of logical wait users was 16 - 20.

504

1F8

SMF70A08

binary

Count of times the number of logical wait users was 21 - 25.

508

1FC

SMF70A09

binary

Count of times the number of logical wait users was 26 - 30.

512

200

SMF70A10

binary

Count of times the number of logical wait users was 31 - 35.

516

204

SMF70A11

binary

Count of times the number of logical wait users was 36 or more.

520

208

SMF70PMN

binary

Minimum number of ASCH address spaces. An ASCH address space is scheduled by the APPC/MVS transaction scheduler.

522

20A

SMF70PMM

binary

Maximum number of ASCH address spaces.

524

20C

SMF70PTT

binary

Total number of ASCH address spaces.

528

210

SMF70P00

binary

Number of times when 0 ASCH address spaces were found.

532

214

SMF70P01

binary

Number of times when 1 - 2 ASCH address spaces were found.

536

218

SMF70P02

binary

Number of times when 3 - 4 ASCH address spaces were found.

540

21C

SMF70P03

binary

Number of times when 5 - 6 ASCH address spaces were found.

544

220

SMF70P04

binary

Number of times when 7 - 8 ASCH address spaces were found.

548

224

SMF70P05

binary

Number of times when 9 - 10 ASCH address spaces were found.

552

228

SMF70P06

binary

Number of times when 11 - 15 ASCH address spaces were found.

556

22A

SMF70P07

binary

Number of times when 16 - 20 ASCH address spaces were found.

560

230

SMF70P08

binary

Number of times when 21 - 25 ASCH address spaces were found.

564

234

SMF70P09

binary

Number of times when 26 - 30 ASCH address spaces were found.

568

238

SMF70P10

binary

Number of times when 31 - 35 ASCH address spaces were found.

572

23A

SMF70P11

binary

Number of times when 36 or more ASCH address spaces were found.

576

240

SMF70XMN

binary

Minimum number of OMVS address spaces.

578

242

SMF70XMM

binary

Maximum number of OMVS address spaces.

580

244

SMF70XTT

binary

Total number of OMVS address spaces.

584

248

SMF70X00

binary

Number of times when zero OMVS address spaces were found.

588

24C

SMF70X01

binary

Number of times when 1 - 2 OMVS address spaces were found.

592

250

SMF70X02

binary

Number of times when 3 - 4 OMVS address spaces were found.

596

254

SMF70X03

binary

Number of times when 5 - 6 OMVS address spaces were found.

600

258

SMF70X04

binary

Number of times when 7 - 8 OMVS address spaces were found.

604

25C

SMF70X05

binary

Number of times when 9 - 10 OMVS address spaces were found.

608

260

SMF70X06

binary

Number of times when 11 - 15 OMVS address spaces were found.

612

264

SMF70X07

binary

Number of times when 16 - 20 OMVS address spaces were found.

616

268

SMF70X08

binary

Number of times when 21 - 25 OMVS address spaces were found.

620

26C

SMF70X09

binary

Number of times when 26 - 30 OMVS address spaces were found.

624

270

SMF70X10

binary

Number of times when 31 - 35 OMVS address spaces were found.

628

274

SMF70X11

binary

Number of times when 36 or more OMVS address spaces were found.

Fields SMF70Q00 to SMF70Q12 count the In Ready users based on the number N of logical processors being online when the sample was taken. With HiperDispatch mode active and an SMF record level SMF70SRL greater or equal to X'55'(85), N is the number of logical processors being online and not parked when the sample was taken.

632

278

SMF70Q00

binary

Count of times In Ready users was less or equal N.

636

27C

SMF70Q01

binary

Count of times In Ready users was N+1.

640

280

SMF70Q02

binary

Count of times In Ready users was N+2.

644

284

SMF70Q03

binary

Count of times In Ready users was N+3.

648

288

SMF70Q04

binary

Count of times In Ready users was N+4 or N+5.

652

28C

SMF70Q05

binary

Count of times In Ready users was N+6 to N+10.

656

290

SMF70Q06

binary

Count of times In Ready users was N+11 to N+15.

660

294

SMF70Q07

binary

Count of times In Ready users was N+16 to N+20.

664

298

SMF70Q08

binary

Count of times In Ready users was N+21 to N+30.

668

29C

SMF70Q09

binary

Count of times In Ready users was N+31 to N+40.

672

2A0

SMF70Q10

binary

Count of times In Ready users was N+41 to N+60.

676

2A4

SMF70Q11

binary

Count of times In Ready users was N+61 to N+80.

680

2A8

SMF70Q12

binary

Count of times In Ready users was greater than N+80.

684

2AC

SMF70SRM

binary

Number of samples taken by SRM

688

2B0

SMF70CMN

binary

Minimum number of work units for general purpose processors over interval.

692

2B4

SMF70CMM

binary

Maximum number of work units for general purpose processors over interval.

696

2B8

SMF70CTT

binary

Total number of work units for general purpose processors over interval.

700

2BC

SMF70DMN

binary

Minimum number of work units for zAAPs over interval.

704

2C0

SMF70DMM

binary

Maximum number of work units for zAAPs over interval.

708

2C4

SMF70DTT

binary

Total number of work units for zAAPs over interval.

712

2C8

SMF70EMN

binary

Minimum number of work units for zIIPs over interval.

716

2CC

SMF70EMM

binary

Maximum number of work units for zIIPs over interval.

720

2D0

SMF70ETT

binary

Total number of work units for zIIPs over interval.

Fields SMF70U00 to SMF7U015 count the number of work units based on the number N of logical processors being online when the sample was taken. With HiperDispatch mode active, N is the number of logical processors being online and not parked when the sample was taken.

724

2D4

SMF70U00

binary

Count of times the number of work units was less or equal N.

728

2D8

SMF70U01

binary

Count of times the number of work units was N+1.

732

2DC

SMF70U02

binary

Count of times the number of work units was N+2.

736

2E0

SMF70U03

binary

Count of times the number of work units was N+3.

740

2E4

SMF70U04

binary

Count of times the number of work units was N+4 or N+5.

744

2E8

SMF70U05

binary

Count of times the number of work units was between N+6 and N+10.

748

2EC

SMF70U06

binary

Count of times the number of work units was between N+11 and N+15.

752

2F0

SMF70U07

binary

Count of times the number of work units was between N+16 and N+20.

756

2F4

SMF70U08

binary

Count of times the number of work units was between N+21 and N+30.

760

2F8

SMF70U09

binary

Count of times the number of work units was between N+31 and N+40.

764

2FC

SMF70U10

binary

Count of times the number of work units was between N+41 and N+60.

768

300

SMF70U11

binary

Count of times the number of work units was between N+61 and N+80.

772

304

SMF70U12

binary

Count of times the number of work units was between N+81 and N+100.

776

308

SMF70U13

binary

Count of times the number of work units was between N+101 and N+120.

780

30C

SMF70U14

binary

Count of times the number of work units was between N+121 and N+150.

784

310

SMF70U15

binary

Count of times the number of work units was greater N+150.

PR/SM Partition Data Section
(Present for subtype 1)
This section contains a configured logical partition.
There is one for each logical partition. The measurements
are on a per logical processor basis when multithreading
is disabled and on a per logical core basis when
multithreading is enabled for the reporting interval.
In the latter case, the terms logical processor and
logical CPU refer to a logical core.(Offset from beginning of record: SMF70BCS)

SMF70LPM

EBCDIC

Logical partition name.

SMF70LPN

binary

Logical partition number.

SMF70PFG

binary

Partition flags Bit Meaning When Set 0 Partition has changed from activated to deactivated, or vice versa, during interval 1 Number of logical processors in partition has changed 2 Number of dedicated processors in partition has changed 3 Number of shared processors in partition has changed 4 WLM LPAR management is active for this partition. 5 Wait time field is defined. 6 Defined capacity limit has been changed. 7 Capacity limit is not defined.

SMF70BDN

binary

Number of logical CPUs assigned to this partition. This count matches the number of subsequent PR/SM data sections. For processor type D/T2064, SMF70BDN has an alternate definition if in SMF70PFG bit 5 is on: It then contains the max defined logical processors as shown at the HMC console. For active logical processors, the online time SMF70ONT is not zero.

SMF70BDS

binary

The PR/SM logical processor data blocks for all partitions are grouped together in the record. PR/SM logical processor data blocks for a given partition are grouped together. To get to the first logical processor data block associated with this partition, skip over the number of logical processor data blocks specified by this field, starting at the first logical processor data block in the record.

SMF70BDA

binary

Accumulated number of active logical processors at a WLM partition. This value is updated at each measurement cycle. It does not cover the logical processors for a non WLM managed partition. (A partition is WLM managed, when flag SMF70WLM = ON.) To get the average number of logical CPUs, this value has to be divided by the number of Diagnose samples (field SMF70DSA in the CPU control section).

SMF70SPN

EBCDIC

LPAR cluster name. An LPAR cluster is the subset of the systems in a sysplex that are running as LPARs on the same CEC. Blank, if partition is not a cluster member.

SMF70STN

EBCDIC

System name. Blank, if partition is not a z/OS system.

binary

Reserved.

SMF70CSF

binary

Number of megabytes of central storage currently online to this partition.

binary

Reserved.

SMF70ESF

binary

Number of megabytes of expanded storage currently online to this partition.

SMF70MSU

binary

Defined capacity limit (in millions of service units).

SMF70PFL

binary

Additional partition flags. Bit - Meaning When Set. 0 Content of SMF70UPI is valid. 1 Group flag. This partition is member of a capacity group. 2 Polarization flag. This partition is vertically polarized. That is, HiperDispatch mode is active. The SMF70POW fields in the logical processor data section are valid for CPUs of this partition. 3-15 Reserved.

SMF70UPI

binary

User partition ID. Valid if bit 0 of SMF70PFL is set.

SMF70MTID

binary

Maximum Thread Identification. A non-zero value indicates that PROCVIEW CORE is effective for this partition and the hardware supports multithreading.

SMF70GNM

EBCDIC

Name of the capacity group to which this partition belongs. Valid if bit 1 of SMF70PFL is set.

SMF70GMU

binary

Maximum licensing units of a group. The maximum number of processor licensing units for the group of logical partitions of which this partition is a member, and which may be consumed per unit of time, on average. Valid if bit 1 of SMF70PFL is set.

SMF70HWGr_
Name

EBCDIC

Name of the hardware group to which this partition belongs.

SMF70_
BoostInfo

binary

Boost information
Bit Meaning when set
0 zIIP capacity boost was active at some point within the interval.
1 Speed boost was active at some point within the interval.
5-7 BoostClass b'001'- IPL, b'010' - shutdown

binary

Reserved

PR/SM Logical Processor Data Section
(Present for subtype 1)
This section contains a PR/SM logical processor data block.
There is one for each logical processor in each
configured partition. The terms logical processor and
logical CPU refer to a logical core if multithreading
is enabled for the reporting interval.(Offset from beginning of record: SMF70BVS + (SMF70BDS * SMF70BVL))

SMF70PDT

binary

Logical processor dispatch time, in microseconds. This is the number of microseconds that were accumulated during the measurement interval (during which a physical CPU was assigned to this logical CPU). When associated with partition name PHYSICAL, this field contains the accumulated number of microseconds during which a physical CPU was busy, but the time could not be attributed to a specific logical partition. This time includes the time PR/SM was controlling the physical processor (LPAR management time), as well as any other time the processor was busy for any reason such as managing coupling facility traffic.

SMF70VPA

binary

Logical processor address.

SMF70BPS

binary

Partition processor resource weight factor. If the value is X‘FFFF’, then the partition has been assigned dedicated processors.

SMF70VPF

binary

Logical processor flags Bit Meaning When Set 0 Wait completion is enabled 1 Wait completion status has changed during interval 2 Weight has changed during interval 3 Partition capping is enabled 4 Partition capping status has changed during the interval 5 Logical processor varied online during the measurement interval 6-7 Reserved.

binary

Reserved.

SMF70CIX

binary

Index to the CPU-identification name section that contains the EBCDIC name corresponding to the CPU type of the logical processor. This field is zero if there is no information available.

SMF70EDT

binary

Logical processor effective dispatch time, in microseconds. The number of microseconds that were accumulated during the measurement interval (excluding LPAR management time), during which a physical CPU was assigned to this logical CPU. When associated with partition name PHYSICAL, this field contains the accumulated number of microseconds during which a physical CPU was busy, but the time could not be attributed to a specific logical partition or to LPAR management of the physical processor. One example is time used for managing coupling facility traffic. This field is zero, if not supported by the hardware. LPAR management time is the time from SMF70PDT associated with partition name PHYSICAL minus the contents of this field.

SMF70ACS

binary

Accumulated processor actual share. To get the average processor actual share, this value has to be divided by the number of Diagnose samples (field SMF70DSA in the CPU control section).

SMF70MIS

binary

Processor minimum share.

SMF70MAS

binary

Processor maximum share.

SMF70NSI

binary

Number of samples within 10% of the specified minimum.

SMF70NSA

binary

Number of samples within 10% of the specified maximum.

SMF70ONT

binary

Logical processor online time.

SMF70WST

binary

Logical processor wait state time.

SMF70PMA

binary

Average adjustment weight for pricing management.

SMF70NSW

binary

Number of samples when WLM capped partition.

SMF70POW

binary

Polarization weight for the logical CPU when HiperDispatch mode is active. See bit 2 (SMF70PWF) of SMF70PFL. Multiplied by a factor of 4096 for more granularity. The value may be the same or different for all shared CPUs of type SMF70CIX. This is an accumulated value. Divide by the number of Diagnose samples SMFX70DSA to get average weight value for the interval.

SMF70NCA

binary

Number of diagnose samples where capping actually limited the usage of processor resources for the set of logical CPUs of type SMF70CIX within the logical partition.

SMF70HW_
Cap_
Limit

binary

If not zero, absolute limit on partition usage of all CPUs of the type indicated in SMF70CIX in terms of numbers of hundredth of CPUs.

binary

Reserved.

SMF70MTIT

binary

Multithreading Idle Time in microseconds accumulated for all threads of a dispatched core. This field is only valid if SMF70MTID is not zero for this partition.

CPU Identification Section
(Present for subtype 1)
There is one section per EBCDIC name that identifies a CPU type.
’CP’ and ’ICF’, with appropriate trailing blanks, are examples of
EBCDIC names describing a General Purpose CPU and an
Internal Coupling Facility CPU, respectively.(Offset from beginning of record: SMF70CNS + (SMF70CIX * SMF70CNL))

SMF70CIN

EBCDIC

CPU-identification name.

SMF70CTN

binary

Number of physical CPUs of this type at interval end.

binary

Reserved.

SMF70CAN

binary

Accumulated number of physical CPUs. Divide by SMF70DSA to get the average number of physical CPUs of this type applicable during the interval.

Logical Core Data Section
(Present for subtype 1)
This section contains usage information for a
logical core in a multithreading environment
(when the LOADxx PROCVIEW CORE parameter is in effect).(Offset from beginning of record: SMF70COS)

SMF70_
CORE_
ID

binary

Core identification.

SMF70_
CORE_
FLG

binary

Logical Core Information
Bit Meaning when set
0 Core LPAR Busy time is valid.
1-7 Reserved.

binary

Reserved.

SMF70_
CPU_
SKIP

binary

The CPU data sections for this core are grouped together in the record. To get to the first CPU data section associated with this logical core, skip over the number of CPU data sections specified by this field, starting at the first CPU data section in the record.

SMF70_
CPU_
NUM

binary

Number of CPU data sections for this core. This value represents the number of threads that are active on this core.

SMF70_
PROD

binary

Multithreading core productivity numerator. Divide this value by 1024 to get the multithreading core productivity. A zero value is reported if the core was not configured ONLINE for the complete interval. If SMF70_CPU_NUM is greater than 1, the core productivity represents the percentage of how much work the core resources accomplished while dispatched to physical hardware over the maximum amount of work the core resources could have accomplished while dispatched to physical hardware.

SMF70_
LPAR_
BUSY

binary

Multithreading core LPAR Busy Time in milliseconds. This field is valid if bit 0 of SMF70_CORE_FLG is set.

Tenant Resource Group data section
(Present for subtype 1) This section contains general tenant resource group and tenant information as well as processor consumption measurements for the interval.(Offset from beginning of record: SMF70TOS)

SMF70_
TRG_
NAME

EBCDIC

Tenant resource group name.

SMF70_
TRG_
DESC

EBCDIC

Tenant resource group description.

SMF70_
TRG_
TNTID

EBCDIC

Tenant identifier.

SMF70_
TRG_
TNTNAME

EBCDIC

Tenant name.

SMF70_
TRG_
SBID

EBCDIC

Solution ID.

144

SMF70_
TRG_
SUCP

binary

Service units on CPs consumed by tenant resource group.

152

SMF70_
TRG_
SUIFA

binary

Service units on zAAPs consumed by tenant resource group.

160

SMF70_
TRG_
SUSUP

binary

Service units on zIIPs consumed by tenant resource group.

168

SMF70_
TRG_
LAC

binary

Long-term average service on general purpose processors in millions of service units per hour consumed by tenant resource group.

172

SMF70_
TRG_
LAC_
CBP

binary

Reserved for future use.

176

SMF70_
TRG_
FLAGS

binary

Reserved for future use.

178

binary

Reserved

180

SMF70_
TRG_
MEM

binary

Memory consumption of tenant resource group in units of 4K frames.

Cryptographic Coprocessor Data Section
(Present for subtype 2)
There is one section per cryptographic coprocessor.(Offset from beginning of record: SMF7023S)

SMF70_
R7023AX

binary

Crypto processor index.

SMF70_
R7023CT

binary

Crypto processor type.
Value - Meaning
3 PCICC
5 PCIXCC
7 CEX2C
9 CEX3C
10 CEX4C
11 CEX5C
12 CEX6C
13 CEX7C

binary

Reserved.

SMF70_
R7023SF

floating

Scaling factor for this cryptographic coprocessor. Execution times in this data section have to be multiplied by this scaling factor to achieve a value in seconds.

SMF70_
R7023T0

floating

Execution time of all operations on the specified cryptographic coprocessor.

SMF70_
R7023C0

floating

Number of all operations on the specified cryptographic coprocessor.

binary

Reserved.

SMF70_
R7023C1

floating

Number of all RSA-key-generation operations.

SMF70_
R7023SCOPE

binary

Specifies the scope of the cryptographic CCA coprocessor data section.
Value Meaning
0 Data with CPC scope
1 Data with System scope

SMF70_
R7023DID

binary

Domain ID 50 42 2 Reserved

Cryptographic Accelerator Data Section
(Present for subtype 2)
There is one section per cryptographic accelerator(Offset from beginning of record: SMF7024S)

SMF70_
R7024AX

binary

Crypto processor index.

SMF70_
R7024CT

binary

Crypto processor type.
Value - Meaning
4 PCICA
6 CEX2A
8 CEX3A2
11 CEX5A

SMF70_
R7024MSK

binary

Validity bit mask. Each bit position represents the validity of a timer-counter pair that measures the execution time and number of operations on a cryptographic accelerator card for a certain type of RSA operations.
Bit Meaning When Set
0 Valid data for 1024-bit ME-format RSA operations
1 Valid data for 2048-bit ME-format RSA operations
2 Valid data for 1024-bit CRT-format RSA operations
3 Valid data for 2048-bit CRT-format RSA operations
4 Valid data for 4096-bit ME-format RSA operations
5 Valid data for 4096-bit CRT-format RSA operations
6-7 Reserved

SMF70_
R7024EN

binary

Number of engines on the Crypto accelerator card. Specifies the number of valid entries in the SMF70_R7024TC array.

SMF70_
R7024SF

floating

Scaling factor for this cryptographic accelerator. Execution times in this data section have to be multiplied by this scaling factor to achieve a value in seconds.

The following block of data (R7024TC) exists five times for up
to five engines of a cryptographic accelerator. Unused blocks
are allocated with values set to 0.

SMF70_
R7021MET

floating

Execution time for all operations in 1024-bit-ME format.

SMF70_
R7021MEC

floating

Number of all operations in 1024-bit-ME format.

SMF70_
R7022MET

floating

Execution time for all operations in 2048-bit-ME format.

SMF70_
R7022MEC

floating

Number of all operations in 2048-bit-ME format.

SMF70_
R7021CRT

floating

Execution time for all operations in 1024-bit-CRT format.

SMF70_
R7021CRC

floating

Number of all operations in 1024-bit-CRT format.

SMF70_
R7022CRT

floating

Execution time for all operations in 2048-bit-CRT format.

SMF70_
R7022CRC

floating

Number of all operations in 2048-bit-CRT format.

End of five instances of the SMF70_R7024TC data block.(Offset from beginning of record: SMF702CS)

336

150

SMF70_
R7023MET

floating

Execution time for all operations in 4096-bit ME-format.

344

158

SMF70_
R7023MEC

floating

Number of all operations in 4096-bit ME-format.

352

160

SMF70_
R7023CRT

floating

Execution time for all operations in 4096-bit CRT-format.

360

168

SMF70_
R7023CRC

floating

Number of all operations in 4096-bit CRT-format.

368

170

SMF70_
R7024SCOPE

binary

Specifies the scope of the cryptographic accelerator data section.
Value Meaning
0 Data with CPC scope
1 Data with System scope

369

171

SMF70_
R7024DID

binary

Domain ID

370

172

binary

Reserved

ICSF Services Data Data Section
(Present for subtype 2)
Contains measurement data of selected Integrated Cryptographic
Service Facility (ICSF) activities
There is either one or no section containing measurement data of
selected Integrated Cryptographic Service Facility (ICSF) activities.

SMF70_
R702SNEC

floating

Single DES: Number of calls to encipher the data.

SMF70_
R702SNEB

floating

Single DES: Number of bytes of data enciphered.

SMF70_
R702SNEI

floating

Single DES: Number of instructions used to encipher the data.

SMF70_
R702TNEC

floating

Triple DES: Number of calls to encipher the data.

SMF70_
R702TNEB

floating

Triple DES: Number of bytes of data enciphered.

SMF70_
R702TNEI

floating

Triple DES: Number of instructions used to encipher the data.

SMF70_
R702SNDC

floating

Single DES: Number of calls to decipher the data.

SMF70_
R702SNDB

floating

Single DES: Number of bytes of data deciphered.

SMF70_
R702SNDI

floating

Single DES: Number of instructions used to decipher the data.

SMF70_
R702TNDC

floating

Triple DES: Number of calls to decipher the data.

SMF70_
R702TNDB

floating

Triple DES: Number of bytes of data deciphered.

SMF70_
R702TNDI

floating

Triple DES: Number of instructions used to decipher the data.

SMF70_
R702NMGC

floating

Number of calls to generate the message authentication code (MAC).

104

SMF70_
R702NMGB

floating

Number of bytes of data for which the MAC was generated.

112

SMF70_
R702NMGI

floating

Number of PCMF instructions used to generate the MAC.

120

SMF70_
R702NMVC

floating

Number of calls to verify the MAC.

128

SMF70_
R702NMVB

floating

Number of bytes of data for which the MAC was verified.

136

SMF70_
R702NMVI

floating

Number of PCMF instructions used to verify the MAC.

144

SMF70_
R702NHAC

floating

Number of calls to hash the data.

152

SMF70_
R702NHAB

floating

Number of bytes of data which was hashed.

160

SMF70_
R702NHAI

floating

Number of PCMF instructions used to hash the data.

168

SMF70_
R702NPTC

floating

Number of calls to translate the PIN.

176

SMF70_
R702NPVC

floating

Number of calls to verify the PIN.

184

SMF70_
R702NH2C

floating

For SHA-224 and SHA-256 hashing: Number of calls to hash the data.

192

SMF70_
R702NH2B

floating

For SHA-224 and SHA-256 hashing: Number of bytes of data which was hashed.

200

SMF70_
R702NH2I

floating

For SHA-224 and SHA-256 hashing: Number of PCMF instructions used to hash the data.

208

SMF70_
R702NH5C

floating

For SHA-384 and SHA-512 hashing: Number of calls to hash the data.

216

SMF70_
R702NH5B

floating

For SHA-384 and SHA-512 hashing: Number of bytes of data which was hashed.

224

SMF70_
R702NH5I

floating

For SHA-384 and SHA-512 hashing: Number of PCMF instructions used to hash the data.

AES measurements. Fields are only valid if SMF70_R702CDLV is greater than 11.

232

SMF70_
R702CDLV

binary

ICSF data level.

236

SMF70_
R702AESC

floating

Number of AES encipher calls sent to a coprocessor.

244

SMF70_
R702AESB

floating

Number of bytes processed by the AES encipher services handled by a coprocessor.

252

SMF70_
R702AESI

floating

Number of operations required to complete the AES encipher service calls to a coprocessor.

260

104

SMF70_
R702ASDC

floating

Number of AES decipher calls sent to a coprocessor.

268

10C

SMF70_
R702ASDB

floating

Number of bytes processed by the AES decipher services handled by a coprocessor.

276

114

SMF70_
R702ASDI

floating

Number of operations required to complete the AES decipher service calls to a coprocessor.

Digital Signatures measurements. Fields are valid only if R702CDLV is greater than 13.

284

11C

SMF70_
R702DRGC

floating

Number of calls to generate the RSA digital signatures.

292

124

binary

Reserved.

308

134

SMF70_
R702DRVC

floating

Number of calls to verify the RSA digital signatures.

316

13C

binary

Reserved.

332

14C

SMF70_
R702DEGC

floating

Number of calls to generate the ECC digital signatures.

340

154

binary

Reserved.

356

164

SMF70_
R702DEVC

floating

Number of calls to verify the ECC digital signatures.

364

16C

binary

Reserved.

AES MAC measurements. Fields are valid only if R702CDLV is greater than 17

380

17C

SMF70_
R702AMGC

floating

Number of calls to generate the AES MACs.

388

184

SMF70_
R702AMGB

floating

Number of bytes of data for which the AES MACs were generated.

396

18C

SMF70_
R702AMGI

floating

Number of instructions used to generate the AES MACs.

404

194

SMF70_
R702AMVC

floating

Number of calls to verify the AES MACs.

412

19C

SMF70_
R702AMVB

floating

Number of bytes of data for which the AES MACs were verified.

420

1A4

SMF70_
R702AMVI

floating

Number of instructions used to verify the AES MACs.

FPE measurements. Fields are valid only if R702CDLV is greater than 19(Offset from beginning of record: SMF7025S)

428

1AC

SMF70_
R702FPEC

floating

Number of calls to encipher data using FPE.

436

1B4

SMF70_
R702FPEB

floating

Number of bytes of data enciphered using FPE.

444

1BC

SMF70_
R702FPEI

floating

Number of instructions used to encipher the data using FPE.

452

1C4

SMF70_
R702FPDC

floating

Number of calls to decipher data using FPE.

460

1CC

SMF70_
R702FPDB

floating

Number of bytes of data deciphered using FPE.

468

1D4

SMF70_
R702FPDI

floating

Number of instructions used to decipher the data using FPE.

476

1DC

SMF70_
R702FPTC

floating

Number of calls to translate data using FPE.

484

1E4

SMF70_
R702FPTB

floating

Number of bytes of data translated using FPE.

492

1EC

SMF70_
R702FPTI

floating

Number of instructions used to translate the data using FPE.

Cryptographic PKCS11 Coprocessor Data Section
There is one section per cryptographic PKCS11 coprocessor

SMF70_
R7025AX

binary

Crypto processor index.

SMF70_
R7025CT

binary

Crypto processor type:
Value - Meaning
10 CEX4P
11 CEX5P
12 CEX6P
13 CEX7P

SMF70_
R7025MSK

binary

Validity bit mask. Each bit position represents the validity of a timer-counter pair that measures the execution time and number of operations by functions on cryptographic PKCS11 coprocessor.

Bit	Meaning When Set
0	Valid data for operations by slow asymmetric-key functions
1	Valid data for operations by fast asymmetric-key functions
2	Valid data for operations by symmetric-key functions (partial or incremental results)
3	Valid data for operations by symmetric-key functions (complete or final result)
4	Valid data for operations by asymmetric-key generation functions

5-7 Reserved

SMF70_
R7025MT

binary

Reserved for diagnostic purposes.

binary

Reserved.

SMF70_
R7025SF

floating

Scaling factor for this cryptographic PKCS11 coprocessor. Execution times in this data section have to be multiplied by this scaling factor to achieve a value in seconds.

SMF70_
R7025SAT

floating

Aggregate execution time of operations by slow asymmetric-key functions.

SMF70_
R7025SAC

floating

Number of operations by slow asymmetric-key functions.

SMF70_
R7025FAT

floating

Aggregate execution time of operations by fast asymmetric-key functions.

SMF70_
R7025FAC

floating

Number of operations by fast asymmetric-key functions.

SMF70_
R7025SPT

floating

Aggregate execution time of operations by symmetric-key functions that return partial or incremental results.

SMF70_
R7025SPC

floating

Number of operations by symmetric-key functions that return partial or incremental results.

SMF70_
R7025SCT

floating

Aggregate execution time of operations by symmetric-key functions that return a complete or final result.

SMF70_
R7025SCC

floating

Number of operations by symmetric-key functions that return a complete or final result.

SMF70_
R7025AGT

floating

Aggregate execution time of operations by asymmetric-key generation function.

SMF70_
R7025AGC

floating

Number of operations by asymmetric-key generation function.

SMF70_
R7025SCOPE

binary

Specifies the scope of the cryptographic PKCS11 coprocessor data section.
Value Meaning
0 Data with CPC scope
1 Data with System scope

SMF70_
R7025DID

binary

Domain ID

binary

Reserved

The table above is based on the description provided by IBM in its "MVS Systems Management Facilities (SMF)" manual.

Spectrum SMF Writer - the 4GL SMF Report Writer.

Sample RMF Processor Activity Report from SMF 70 Records

The sample SMF report below was created with Spectrum SMF Writer, the low-cost 4GL SMF report writer.

It reads as input the SMF file and selects just the type 70 subtype 1 (RMF Processor Activity) records. (See SMF 70 record layout.)

These records have a complex layout. Each record contains a variable number of LPAR sections, one for each LPAR. Furthermore, there are a variable number of Logical Processors sections for each of the LPAR sections. However, these logical processor sections are all located together -- not physically near their owning LPAR section.

Nevertheless, Spectrum SMF Writer easily handles these records so you quickly create powerful custom reports from the RMF data. We use nested NORMALIZE parms on the INPUT statement to process each Logical Processor that exists for each Logical Partition. We sort the data by LPAR name and then by logical processor address.

We have formatted the report to reflect this hierarchical layout of the SMF records. For each LPAR, we print a header containing ID info, as well as some info about the physical CPU. Below that are each of the processors for that LPAR. These detail processor report lines show the percentage of the RMF reporting interval for which the processor was: 1) online, 2) waiting, 3) effectively dispatched and 4) processor dispatched.

All of this with just a few lines of code!
Why not install a Spectrum SMF Writer trial right now and start making your own SMF reports!

These Spectrum SMF Writer Statements:

OPTION: MAXNORMDUMP(0)  /*SUPPRESS DUMPS FOR LPARS WITHOUT PROCESSORS*/

************************************************************************
*  THE INPUT WILL BE 1 LOGICAL SMF 70-1 REC FOR EACH LPAR/PROC COMBO   *
************************************************************************
INPUT:  SMF70
  NORM(SMF70_PRSMPD_SEGMENT)
  NORM(SMF70_PRSMLPD_SEGMENT)

************************************************************************
*  INCLUDE ALL 70-1 LPAR SECTIONS THAT HAVE AT LEAST 1 PROCESSOR       *
************************************************************************
INCLUDEIF: SMF70RTY=70 AND SMF70STY=1      /*INCLUDE SMF 70 SUBTYPE 1 */
       AND SMF70BDN > 0      /* ONLY IF LPAR HAS AT LEAST 1 PROCESSOR */
       AND SMF70ONT > 00:00:00  /* ONLY IF LPAR WAS "ACTIVE" IN PERIOD*/

************************************************************************
*  COMPUTE SOME WORK FIELDS (FOR SORTING/BREAKING AND FOR DISPLAY)     *
************************************************************************
COMP: PARTITION      = #FORMAT(SMF70LPN 3) + ' - ' + SMF70LPM
COMP: SORT_PARTITION = SMF70SNM + PARTITION

COMP: SORT_DATE_TIME = #FORMAT(SMF70DTE YYYYMMDD) +
                       #FORMAT(SMF70TME HHMMSS)

************************************************************************
*  SORT AND PAGE-BREAK ON DATE/TIME. FURTHER ON PARTITION AND PROCESSOR*
************************************************************************
SORT: SORT_DATE_TIME                  /* INTERVAL  */
      SORT_PARTITION(PAGE)            /* PARTITION */
      SMF70CIN                        /* CPU NAME          */
      SMF70VPA                        /* LOGICAL PROCESSOR */

************************************************************************
*  THE HEADING FOR EACH CONTROL GROUP SHOWS DATA FROM LPAR SECTION.    *
*  (NUMBERS IN PARENTHESES SPECIFY THE PRINT-LINE SIZE OF AN ITEM.)    *
************************************************************************
BREAK: SORT_PARTITION
       TOTAL('TOTAL')

************************************************************************
*  COLUMNS STMT LISTS DETAIL DATA TO PRINT FROM THE PROCESSOR SECTIONS.*
************************************************************************
COLUMNS:
      SMF70VPA('LOGL|PROC|ADDR' HEX NOACC)
      SMF70BPS('WEIGHT|FACTOR' 6)
      SMF70CIN(4 'CPU|NAME')
    2 '|'
      SMF70ONT('ONLINE|TIME')
      SMF70ONT_PCT('PCT|ONLINE')
    2 '|'
      SMF70WST('WAIT|TIME')
      SMF70WST_PCT('PCT|WAIT' 6)
    2 '|'
      SMF70EDT('EFFECT.|DISPATCH|TIME')
      SMF70EDT_PCT('PCT|EFF|DISP')
    2 '|'
       SMF70PDT('PROC|DISP|TIME')
       SMF70PDT_PCT('PCT|PROC|DISP' 6)

************************************************************************
* REPORT TITLES                                                        *
*(SLASHES SEPARATE THE LEFT (EMPTY HERE), CENTER AND RIGHT TITLE PARTS)*
************************************************************************
TITLE: 'RUN DATE:' #DATE
       / 'SMF 70 - PROCESSOR PERCENT TIME ONLINE REPORT'
       / 'PAGE' #PAGENUM

TITLE:    ' ' /
TITLE:    'PARTITION INFO' /
TITLE:    '==============' /
TITLE:    'SYSTEM:' SMF70SNM /
TITLE:    'PARTITION (NUM-NAME):' SMF70LPN(3) '-' SMF70LPM /
TITLE:    'PROCESSOR FAMILY AND MODEL:' SMF70MOD(HEX) SMF70MDL(5)
          'SERIAL' SMF70SER(HEX) /
TITLE:    'PROCESSOR CAPACITY:' 0 SMF70WLA(6) '(MSU''S)' /
TITLE:    'LPAR CLUSTER:' SMF70SPN
          'SYSTEM NAME:' SMF70STN /
TITLE:    'LPAR DEFINED CAPACITY LIMIT:' 0 SMF70MSU(6) '(MSU''S)' /
TITLE:    'STORAGE:' SMF70CSF(7) 'MB' /
TITLE:    'PROCESSORS:' SMF70BDN(4) /
TITLE:    ' ' /
TITLE:    'LOGICAL PROCESSOR INFO (FOR ACTIVE PROCESSORS)' /
TITLE:    'FOR' SMF70INT_TIME 'MINUTE INTERVAL ENDING' SMF70DTE
          'AT' SMF70TME /

TITLE:    ' ' /

Produce This SMF Report:


 RUN DATE: 07/02/20       SMF 70 - PROCESSOR PERCENT TIME ONLINE REPORT                PAGE    5

 PARTITION INFO
 ==============
 SYSTEM: TN01
 PARTITION (NUM-NAME):   7 - ZU801IDO
 PROCESSOR FAMILY AND MODEL: 2817 611   SERIAL 083F96
 PROCESSOR CAPACITY:   843 (MSU'S)
 LPAR CLUSTER: DPLEX1   SYSTEM NAME: TD01
 LPAR DEFINED CAPACITY LIMIT:     0 (MSU'S)
 STORAGE:  28,672 MB
 PROCESSORS:   54

 LOGICAL PROCESSOR INFO (FOR ACTIVE PROCESSORS)
 FOR 14:59.957 MINUTE INTERVAL ENDING 10/25/12 AT 14:14:00.04

 LOGL                                                         EFFECT.   PCT       PROC     PCT
 PROC WEIGHT CPU      ONLINE    PCT        WAIT     PCT      DISPATCH   EFF       DISP     PROC
 ADDR FACTOR NAME      TIME    ONLINE      TIME     WAIT       TIME    DISP       TIME     DISP
 ____ ______ ____  _ _________ ______  _ _________ ______  _ _________ _____  _ _________ ______

 0000    187       | 14:59.958 100.0%  |  8:08.826  54.3%  |  6:46.144 45.1%  |  6:49.136  45.5%
 0001    187       | 14:59.958 100.0%  |  8:29.915  56.7%  |  6:18.582 42.1%  |  6:20.414  42.3%
 0002    187       | 14:59.958 100.0%  | 13:26.689  89.6%  |  1:28.331  9.8%  |  1:28.569   9.8%
 0003    187       | 14:59.958 100.0%  | 14:11.978  94.7%  |  0:43.805  4.9%  |  0:43.933   4.9%
 0004    187       | 14:59.958 100.0%  | 14:28.398  96.5%  |  0:28.193  3.1%  |  0:28.296   3.1%
 0005    187       | 14:59.958 100.0%  | 14:38.226  97.6%  |  0:20.609  2.3%  |  0:20.682   2.3%
 0006    187       | 14:59.958 100.0%  | 14:59.933 100.0%  |  0:00.024  0.0%  |  0:00.025   0.0%
 0007    187       | 14:59.958 100.0%  | 14:59.933 100.0%  |  0:00.024  0.0%  |  0:00.024   0.0%
 TOTAL                         100.0%               86.2%              13.4%               13.5%




 RUN DATE: 07/02/20       SMF 70 - PROCESSOR PERCENT TIME ONLINE REPORT                PAGE    6

 PARTITION INFO
 ==============
 SYSTEM: TN01
 PARTITION (NUM-NAME):   8 - ZU802IDO
 PROCESSOR FAMILY AND MODEL: 2817 611   SERIAL 083F96
 PROCESSOR CAPACITY:   843 (MSU'S)
 LPAR CLUSTER: EPLEX1   SYSTEM NAME: TE02
 LPAR DEFINED CAPACITY LIMIT:     0 (MSU'S)
 STORAGE:  28,672 MB
 PROCESSORS:   54

 LOGICAL PROCESSOR INFO (FOR ACTIVE PROCESSORS)
 FOR 14:59.957 MINUTE INTERVAL ENDING 10/25/12 AT 14:14:00.04

 LOGL                                                         EFFECT.   PCT       PROC     PCT
 PROC WEIGHT CPU      ONLINE    PCT        WAIT     PCT      DISPATCH   EFF       DISP     PROC
 ADDR FACTOR NAME      TIME    ONLINE      TIME     WAIT       TIME    DISP       TIME     DISP
 ____ ______ ____  _ _________ ______  _ _________ ______  _ _________ _____  _ _________ ______

 0000    237       | 14:59.958 100.0%  |  5:05.128  33.9%  |  9:49.597 65.5%  |  9:53.196  65.9%
 0001    237       | 14:59.958 100.0%  |  6:36.685  44.1%  |  8:18.401 55.4%  |  8:22.515  55.8%
 0002    237       | 14:59.958 100.0%  |  7:20.588  49.0%  |  7:14.363 48.3%  |  7:16.668  48.5%
 0003    237       | 14:59.958 100.0%  | 12:17.482  82.0%  |  2:26.713 16.3%  |  2:27.339  16.4%
 0004    237       | 14:59.958 100.0%  | 13:03.208  87.0%  |  1:43.876 11.5%  |  1:44.341  11.6%
 0005    237       | 14:59.958 100.0%  | 13:27.262  89.7%  |  1:20.421  8.9%  |  1:20.784   9.0%
 0006    237       | 14:59.958 100.0%  | 13:15.322  88.4%  |  1:32.095 10.2%  |  1:32.459  10.3%
 0007    237       | 14:59.958 100.0%  | 13:33.702  90.4%  |  1:16.500  8.5%  |  1:16.762   8.5%
 TOTAL                         100.0%               70.6%              28.1%               28.3%




 RUN DATE: 07/02/20       SMF 70 - PROCESSOR PERCENT TIME ONLINE REPORT                PAGE    7

 PARTITION INFO
 ==============
 SYSTEM: TN01
 PARTITION (NUM-NAME):   9 - ZU807IMO
 PROCESSOR FAMILY AND MODEL: 2817 611   SERIAL 083F96
 PROCESSOR CAPACITY:   843 (MSU'S)
 LPAR CLUSTER: NPLEX1   SYSTEM NAME: TN0K
 LPAR DEFINED CAPACITY LIMIT:     0 (MSU'S)
 STORAGE:   4,096 MB
 PROCESSORS:   54

 LOGICAL PROCESSOR INFO (FOR ACTIVE PROCESSORS)
 FOR 14:59.957 MINUTE INTERVAL ENDING 10/25/12 AT 14:14:00.04

 LOGL                                                         EFFECT.   PCT       PROC     PCT
 PROC WEIGHT CPU      ONLINE    PCT        WAIT     PCT      DISPATCH   EFF       DISP     PROC
 ADDR FACTOR NAME      TIME    ONLINE      TIME     WAIT       TIME    DISP       TIME     DISP
 ____ ______ ____  _ _________ ______  _ _________ ______  _ _________ _____  _ _________ ______

 0000     70       | 14:59.958 100.0%  | 14:46.336  98.5%  |  0:12.841  1.4%  |  0:13.202   1.5%
 0001     70       | 14:59.958 100.0%  | 14:47.713  98.6%  |  0:11.682  1.3%  |  0:11.992   1.3%
 0002     70       | 14:59.958 100.0%  | 14:49.414  98.8%  |  0:10.057  1.1%  |  0:10.347   1.2%
 0003     70       | 14:59.958 100.0%  | 14:49.201  98.8%  |  0:10.186  1.1%  |  0:10.483   1.2%
 TOTAL                         100.0%               98.7%               1.2%                1.3%
 
...

See other sample SMF reports.

SMF Type 70 Record

This table shows the record layout for type 70 SMF records (RMF Processor Activity - z/OS 2.4).

It's easy to report on SMF 70 data! (Jump to sample reports)

Sample RMF Processor Activity Report from SMF 70 Records

These Spectrum SMF Writer Statements:

Produce This SMF Report:

This table shows the record layout for type 70 SMF records
(RMF Processor Activity - z/OS 2.4).